• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1359-1366
• /
• 2010

최근 많은 전자제어기술이 개발되고 있으며 또한 차량에 적용되고 있다. 이러한 기술들 중 throttle-by-wire, brake-by-wire, steer-by-wire 와 같은 X-by-wire 가 대표적이며 이는 기계적으로 연결된 부분이 전기적인 신호나 액추에이터로 대체된 것이다. 본 논문에서는 스쿨존에서의 차량의 속도 제어를 위하여 throttle-by-wire, brake-by-wire 가 고려되었으며 특히 스쿨 존에서는 다른 지역에 비해 사고가능성이 높다. 그 이유는 보행자가 횡단 시에 다수의 운전자들이 규정속도를 지키지 않기 때문이다. 따라서 본 논문에서는 스쿨 존에서 규정속도 내로 주행하도록 throttle-by-wire, brake-by-wire 를 이용하여 차량을 감속 제어하였으며 이를 위하여 양산차량의 엔진과 변속기의 제원을 사용하였다. 둘째, 차량의 감속에 있어서 운전자와 승객이 불쾌감을 느낄 수 있는 급격한 감속을 줄이기 위하여 제안된 3 차 궤적 추종법을 적용시켰으며 궤적 추종을 위하여 퍼지-PID 제어를 사용하였다. 마지막으로 시뮬레이션을 통하여 제안된 차량의 감속 제어 시스템의 성능을 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권2호
• /
• pp.96-101
• /
• 2007

Neural networks are known as kinds of intelligent strategies since they have learning capability. There are various their applications from intelligent control fields; however, their applications have limits from the point that the stability of the intelligent control systems is not usually guaranteed. In this paper we propose an adaptive tracking control for robot manipulators using the radial basis function network (RBFN) that is e. kind of neural networks. Adaptation laws for parameters of the RBFN are developed based on the Lyapunov stability theory to guarantee the stability of the overall control scheme. Filtered tracking errors between actual outputs and desired outputs are discussed in the sense of the uniformly ultimately boundedness(UUB). Additionally, it is also shown that parameters of the RBFN are bounded. Experimental results for a SCARA-type robot manipulator show that the proposed adaptive tracking controller is adaptable to the environment changes and is more robust than the conventional PID controller and the neuro-controller based on the multilayer perceptron.

• International Journal of Control, Automation, and Systems
• /
• 제6권6호
• /
• pp.873-883
• /
• 2008

This paper presents a parametric study on the controller design scheme for a gyro-accelerometer to have robust performance under some parameter variations. In particular, an integral and derivative based controller design method is suggested to achieve the desired performances of stability margin, bandwidth, and uniformity of scale for both gyroscopes and accelerometers with uncertainties of quality factor and resonant frequency. The simulation result shows that the control loop based on the suggested method gives satisfactory performance robustness under parameter variations, demonstrating the usefulness of the proposed design scheme.

• 유공압시스템학회논문집
• /
• 제3권2호
• /
• pp.14-20
• /
• 2006

A controller design procedure for an electro-hydraulic positioning systems has been developed using $H{\infty}$ control. The generalized plant models and weighting function for multiplicative uncertainty modelling error was presented along with $H{\infty}$ controller designs in order to investigate the robust stability and performance. Both disturbance rejection and command tracking performances were improved with the $H{\infty}$ controller, and the better uniformity of time response is achieved across wide range of operating conditions than the PID, LQR and LQG control scheme. The multiplicative uncertainty case was specifically suited for the design of an electro-hydraulic positioning control systems using $H{\infty}$ control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1207-1210
• /
• 2003

In this paper, studied traveling by ummaned vehicles using MPC sensor.Explain what is MPC sensor and also is threaded how on vehicles. Made use of PID controller and LQG/LTR controller that is used much in present industrial circles for control of this.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.80-88
• /
• 2010

In a conventional system, hydraulic unit pumps out pressurized oil when the power use is not even necessary. As a result, it causes much power loss. This study is on the proposal of new hydraulic unit which controls the revolution of the pump in order to produce proper power needed and to have good response characteristic. In addition, the existing control methods such as PID control method, fuzzy control method, and adaptive control method are applied to the proposed hydraulic unit. Then the best control method is selected and the controller is developed to realize minimum power loss.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.397-400
• /
• 1991

This paper presents a cartesian space decentralized adaptive controller design for the end effector of the robot manipulator to track the given desired trajectory in the cartesian coordinate. By the cartesian based control scheme, the task related high level motion command is directly executed without solving the complex inverse kinematic equations. The controller does not require the complex manipulator dynamic model, and hence it is computationally very efficient. Each degree of freedom of the end effector on the cartesian space is controlled by a PID feedback controller and a velocity acceleration feed forward conpensation part. Simulation results for a two-link direct drive manipulator conform that the present cartesian based decentralized scheme is feasible.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.346-349
• /
• 2003

For a traveling crane, various control methods such as neural network predictive control and TDOFPID(Two Degree of Freedom Proportional Integral Derivative) are studied. So in this paper, we proposed improved navigation method to reduce transfer time and sway with anti-collision path for avoiding collision in its movement to the finial coordinate. And we constructed the NNPPID(Neural Network Predictive PID) controller to control the precise move and speedy navigation. The proposed predictive control system is composed of the neural network predictor, TDOFPID controller, and neural network self-tuner. We analyzed ASC(Automated Stacking Crane) system and showed some computer simulations to prove excellence of the proposed controller than other conventional controllers.

• 수산해양기술연구
• /
• 제30권4호
• /
• pp.320-328
• /
• 1994

In 1980 s to 1990 s the marine propulsion diesel engines have been developed into lower speed and longer stroke for the enegy saving (small S.F.O.C). As these new trends the conventional mechanical-hydraulic governors were not adapted to the new requirements and the digital governors have been adopted in the marine use. The digital governors usually use the control algorithms such as the PID control, optimal control, adaptive control and etc. While the engine has delay time and parameter variations these control algorithms have difficulty in considering the stability and the robustness for the model uncertainty. In this study, the $H_{\infty}$ controller design method are applied in order to design the feedback controller K(s) to the speed control of the low speed marine diesel engine, and the two-degree-of-freedom control system is constituted with $H_{\infty}$controller. By comparison of responses of the two-degree-of-freedom control system under the delay time and parameter variations is confirmed.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.65-74
• /
• 2002

This paper examines the usefulness of a Brake Steer System (BSS), which uses differential brake forces for steering intervention in the context of Intelligent Transportation Systems (ITS). In order to help the car to turn, a yaw moment can be achieved by altering the left/right and front/rear brake distribution. This resulting yaw moment on the vehicle affects lateral position thereby providing a limited steering function. The steering function achieved through BSS can then be used to control lateral position in an unintended road departure system. A 8-DOF nonlinear vehicle model including STI tire model will be validated using the equations of motion of the vehicle. Then a controller will be developed. This controller, which will be a PID controller tuned by Ziegler-Nichols, will be designed to explore BSS feasibility by modifying the brake distribution through the control of the yaw rate of the vehicle.