• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1983-1989
• /
• 2005

Industrial robots are powerful, extremely accurate multi-jointed systems, but they are heavy and highly rigid because of their mechanical structure and motorization. Therefore, sharing the robot working space with its environment is problematic. A novel pneumatic artificial muscle actuator (PAM actuator) has been regarded during the recent decades as an interesting alternative to hydraulic and electric actuators. Its main advantages are high strength and high power/weight ratio, low cost, compactness, ease of maintenance, cleanliness, readily available and cheap power source, inherent safety and mobility assistance to humans performing tasks. The PAM is undoubtedly the most promising artificial muscle for the actuation of new types of industrial robots such as Rubber Actuator and PAM manipulators. However, some limitations still exist, such as the air compressibility and the lack of damping ability of the actuator bring the dynamic delay of the pressure response and cause the oscillatory motion. In addition, the nonlinearities in the PAM manipulator still limit the controllability. Therefore, it is not easy to realize motion with high accuracy and high speed and with respect to various external inertia loads in order to realize a human-friendly therapy robot To overcome these problems a novel controller, which harmonizes a phase plane switching control method with conventional PID controller and the adaptabilities of neural network, is newly proposed. In order to realize satisfactory control performance a variable damper - Magneto-Rheological Brake (MRB) is equipped to the joint of the manipulator. Superb mixture of conventional PID controller and a phase plane switching control using neural network brings us a novel controller. This proposed controller is appropriate for a kind of plants with nonlinearity uncertainties and disturbances. The experiments were carried out in practical PAM manipulator and the effectiveness of the proposed control algorithm was demonstrated through experiments, which had proved that the stability of the manipulator can be improved greatly in a high gain control by using MRB with phase plane switching control using neural network and without regard for the changes of external inertia loads.

• 한국지능시스템학회논문지
• /
• 제20권4호
• /
• pp.469-475
• /
• 2010

본 논문에서는 두 바퀴로 구동되는 역진자기반의 1인승 차량의 안정적인 균형을 위해 제어기를 설계하였다. 탑승자의 몸무게에 따라 전체 질량이 달라지므로 그에 따른 PID 제어기의 이득값을 실험적으로 구하였다. 이 때 탑승자의 몸무게에 따라 무게 중심이 달라지게 되는데, 이는 밸런싱 각도에 영향을 미치게 된다. 따라서, 안정적인 균형을 이루기 위해서는 몸무게에 따른 목표 밸런싱 각도를 수정하여 제어해야 한다. 다양한 탑승자의 몸무게를 측정하기 위해 차량에 체중계를 달고 측정된 체중 데이터를 컴퓨터로 전송하여 제어기에 적용하였다. 다양한 실험으로 얻은 정보를 사용하여 제어기의 게인 스케줄링을 통하여 보다 안정적인 균형을 유지할 수 있었다.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1572-1576
• /
• 2011

The electromagnetic levitation(EMS) system is one of the well-known nonlinear system because of its nonlinearity and several control techniques have been proposed. We propose an ${\epsilon}$-scaling partial feedback controller for the ball position control of the EMS system. The key feature of our proposed controller is the use of the scaling factor ${\epsilon}$ which provides a function of controller gain tuning along with robustness. In this paper, we show the stability analysis of our proposed controller and the convergence analysis of the state observer in terms of ${\epsilon}$-scaling factor. In addition, the experimental results show the validity of the proposed controller and improved control performance over the conventional PID controller.

• 전자공학회논문지B
• /
• 제31B권10호
• /
• pp.44-52
• /
• 1994

In this paper, we assume that the dynamics of DC motor and nonlinear load are unknown. We propose an inverse dynamic model of DC motor and nonlinear load using the artificial neural network and construck speed control system based on the proposed dynamic model. We also propose another dynamic model with speed prediction scheme using the artificial neural network that removes the undesirable time delay effect caused by the computation time during the real-time control. We suggest a dynamic model which has arbitrary number of speed arguments and is especially effective when the motor and load has large moment of inertia. Next, we suggest a controller that combine the neurocontrol and PID control with constant gain. We show that the proposed neurocontrol systems have capabilities of noise rejection and generalization to have good velocity tracking through computer simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.286-286
• /
• 2000

We consider a negative unity feedback control system in which Che PIO, PI, PD or P controller and a transfer function having only poles are in cascade, We define the notion of the structural polynomial which means that there exists a subdomain of the coefficient space in which the polynomial is Hurwitz (left half plane stable) polynomial. We obtain the necessary and sufficient condition of the structure of the transfer function of which the characteristic polynomial is a structural polynomial, In addition, this paper present another necessary and sufficient condition for the existence of a constant gain controller with which the characteristic polynomial is structurally stable, For the structurally stabilizable P controller, it is allowed that the transfer function may not to all pole plants.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.173-174
• /
• 2007

In this paper, a new speed sensorless control based on an instantaneous reactive power and a fuzzy PI compensator are proposed for the interior permanent magnet synchronous motor (IPMSM) drives. The conventional fixed gain PI and PID controllers are very sensitive to step change of command speed, parameter variations and load disturbance. Also, to the estimated speeds are compensated by using an instantaneous reactive power in synchronously rotating reference frame. In a fuzzy compensator, the system control parameters are adjusted by a fuzzy rule based system, which is a logical model of the human behavior for process control. The effectiveness of algorithm is confirmed by the experiments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.506-510
• /
• 2004

토크 전달시스템은 다수의 기어와 커플링이 유연하게 구성되어 있으므로 모터의 속도가 갑자기 변할 때 비틀림 진동이 발생한다. 모터의 정확한 응답 특성을 얻기 위해서는 반드시 이 진동은 억제되어야 한다. 따라서 진동억제는 모터제어에 있어서 매우 중요하다. 특히 2관성 시스템의 진동억제를 위해 다양한 제어방법들이 소개되었다. 토크의 비틀림 현상으로 인해 발생하는 진동을 억제하기 위해 토크의 비틀림 성분을 궤환시키고 일반적인 필터로 구성된 외란 관측기 필터를 사용하는 방법이 소개되었다. 또한 이를 계수도법(CDM)을 이용 적절한 P 제어기와 필터의 계수값을 설계하여 진동을 억제하는 방법이다. 그러나 계수도법을 이용하여 설계된 제어기 파라미터는 외란 인가시 적응성이 떨어짐을 알 수 있다. 반면 PID 제어기는 설계가 간단하나 초기에 과도한 오버슈트를 및 진동 문제를 유발한다. 이러한 문제점들을 해결하기 위하여 최근에는 2자유도 파라미터 a로 비례이득을 가변함으로써 외란에는 영향을 받지 않고 목표치 추종 성능을 개선할 수 있는 단순하고 실용적인 2자유도 PID 제어기가 소개되었다. 그러나 이 방법 역시 원하는 P값을 얻기 위해 u를 가변 하여야 하는 단점을 가지고 있다. 따라서 본 논문에서는 이러한 단점들을 극복하기 위해 퍼지 알고리즘을 사용 파라미터 $\alpha$를 자동 조정하는 제어기를 설계하였다. 사용된 제어기의 성능을 입증하기 위하여 기존의 제어방법과 시뮬레이션을 통해 비교, 평가한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.212-217
• /
• 2011

A scheduling technique for the improvement of yaw motion stability in in-wheel motor vehicle is proposed. Normally vehicle velocity is controlled via conventional PID method. When vehicle is encountered with different road conditions on left and right hand sides, unstable yaw motion is induced due to the driving force difference in both wheels. In this paper a scheduling formular for control gain is derived in terms of experimental results to generate proper counter control action. Simulation result reveals its effective performance in yaw control of in-wheel vehicle.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.176-187
• /
• 1995

The problem of designing intelligent cruise control system for a longitudinal motion of an automobile, which is powered by internal combustion engines coupled to an automatic multispeed transmission, is considered. The basic concept is a vehicle-following system which maintains desired spacing between vehicles. This system actuates throttle with the information of the spacing error so as to maintain proper spacing and improve passenger ride comfort. In designing the controller, a modified controller, i.e, PID gain scheduling and fuzzy controller with fuzzy compensator was developed in order to overcome the nonlinearities of the automobile and obtain better performance. The computer simulation results illustrate that the better vehicle responses were obtained with the modified fuzzy controller and, under this controller, the vehicle responses were found to be relatively insensitive to parameter variations.

• 풍력에너지저널
• /
• 제2권1호
• /
• pp.90-96
• /
• 2011

The purpose of this paper is to describe the control system for optimal performance of 2MW gearless PMSG wind turbine system, and to afford some techniques of the algorithm selection and design optimization of the wind turbine control system through analysis of load calculation and control characteristic. Wind turbine control system is composed of the main control system and remote control and monitoring system. The main control system is industrial PC based controller, and the remote control and monitoring system is a server based computer system. The main control system has a supervisory control of the wind turbine with operation procedures and power-speed control through the torque control by pitch angle. There are some applications to optimize the wind turbine system at the starting mode with increasing of rotor speed, and cut-in operating mode to prevent trundling cut-in and cut-out, a gain scheduling of pitch PID controller, torque scheduling and limitation of generation power by temperature limitation or remote command by remote control and monitoring system. Also, the server operation program of the remote control and monitoring system and the design of graphical display are described in this paper.