• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.54-59
• /
• 2005

Recently, the ultra-precision stage is widely used in the fields of the nano-technology, specially in AFMs(Atomic Force Microscope) and STMs(Scanning Tunneling Microscope). In this paper, the ultra-precision stage which consists of flexure hinges, piezoelectric actuator, and ultra-precision linear encoder, is designed and developed. The guide mechanism which consisted of flexure hinges is analyzed by Finite Element Method. And we derived the transfer function of the system in 1st order system from step responses according to the magnitude. We performed simulation for the model to tune the control gain and applied the gains to the developed system. Experimental results found that the stage can be controlled in 5 nm resolution by PID controller.

• 한국지능시스템학회논문지
• /
• 제9권5호
• /
• pp.480-489
• /
• 1999

Design and experimental results of yaw rate controller is described for electricallydriven four wheel vehicle without steering mechanism. Yaw rate controller has been known to be necessary to cope with nonlinear char-acteristics of the wheel/road conditions with respect to different road condition and steering angle. For an effective yaw rate control, a fuzzy PID gain scheduler is considered with changing control parameters. In order to apply proposed algorithm to the system a downsized four wheel drive electrically driven vehicle without steering mechanism was manufactured. With these techniques the proposed yaw rate controller is shown by experiment results to be obtained suficient performance in the whole steering regions.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.380-387
• /
• 1994

An experimental study was performed to investigate the characteristics of refrigerant flow rate control and superheat in an evaporator with an electronic expansion valve(EEV). The EEV used in this study was devised using a needle valve coupled with a stepping motor controlled by a personal computer. A Pill control equation was used to control the superheat of the evaporator and to set the superheat to $5^{\circ}C$. In order to determine an optimum running condition for the system, Pill parameters were varied for the wide range of values. The running condition of an air conditioning system with a PI control was reasonably stable compared with that of the Pill control. Experimental results for the PI control using parameter values, $K_p=1.5$, $T_i=400(sec)$ and $T_s=6(sec)$ show that the superheat reached its target value. When external disturbances were introduced to the system, the superheat target value was reached within about 3 minutes. When the EEV was applied to the air conditioning system driven by an inverter, room temperature control was excellent.

• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.874-881
• /
• 2010

무인기의 자동 비행 제어 시스템은 기체의 형태, 크기, 무게 등의 정적 및 동적 변화에 따라 스스로 비행계수를 조정하여 목표 비행궤적을 정확히 따라가도록 제어할 필요가 있다. 본 논문에서는 PID 제어 기법을 이용하는 비행제어시스템에 기계학습모듈(MLM)을 추가하여 기체의 특성 변화에 따라 제어계수를 비행중 실시간 자동으로 조정하는 시스템을 제안한다. MLM은 선형회귀분석과 보정학습을 이용하여 설계되었으며 MLM을 통해 학습된 제어계수의 적합성을 평가하는 평가모듈(EvM)을 함께 모델링 하였다. 이 시스템은 FDC 비버 시뮬레이터를 기반으로 실험하였으며 그 결과를 분석 제시하였다.

• 한국전자통신학회논문지
• /
• 제6권5호
• /
• pp.765-773
• /
• 2011

본 논문에서는 거리센서기반의 차륜형 로봇의 물체추적과 추종에 대한 로봇의 구동제어방법을 제안한다. 물체 추종을 위해 1개의 초음파 송신부와 2개의 초음파 수신부를 사용하여 추종하고자 하는 물체로부터 2개의 거리데이터를 생성한다. 생성된 거리데이터를 기반으로 로봇의 물체까지의 직진오차와, 회전오차를 산출한 뒤, 물체 추종을 위해 PID제어기 기반의 조작량을 계산하여 로봇의 동작제어에 사용한다. 제안된 방법의 특징을 확인하기 위해 3가지 경우에서 실험을 수행하였으며 PID게인이 로봇의 움직임에 미치는 영향과 직진오차게인과 회전오차게인이 로봇의 움직임에 미치는 영향을 각각 확인해 보았다. 제안된 방법은 항상 추종물체를 로봇에 대하여 일정위치에 존재하도록 하는 기법으로 물체추종 어플리케이션 이외에도, 여러 대의 로봇이 특정한 대형을 이루어 움직이게 하는 군집형 제어 문제에 적용될 수 있다.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.33-43
• /
• 2001

드릴쉽과 셔틀탱커등 특수선의 건조가 활발해지면서 정해진 위치에서 장시간 작업해야 할 목적으로 동적 자기위치 유지시스템(Dynamic Positioning System)을 장착하는 선박이 늘어나고 있다. 본 논문에서는 DP 시스템의 구성 요소를 소개하고, 수조에서 실험한 결과를 바탕으로 제어이론과 필터이론에 따른 DP성능을 비교하였다. 실험에 사용한 선박은 10만톤급 드릴쉽으로 모델의 길이가 4m이며, 방향이 고정된 3개의 추진기를 사용하였다. 실험 내용은 명령에 따라 주어진 궤적을 이동하는 능력과 파도가 있는 외란조건에서 원하는 선수각을 유지할 수 있는지를 살펴보았다. 추진력을 구하기 위하여 PID 이론을 적용하였고, 제어게인의 변화에 따른 제어특성을 살펴보았다. 선형운동성분과 계측잡음을 제거하기 위하여 칼만 필터와 디지털 필터를 적용하였고, 각각의 필터성능을 비교 검토하였다.

• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.741-749
• /
• 2005

This paper presents a nonlinear controller design for optical disk drive systems to improve anti-shock performance. The nonlinear anti-shock controller is added parallel to the original linear servo control loop. In the previous work, a dead-zone nonlinear element is used for the nonlinear controller and a PID control method is used for the linear controller. Although this parallel structure of the controller improves anti-shock performance, it has a narrow stability bound. In this paper, the dead-zone with saturation nonlinear element is proposed for the nonlinear controller. Since this nonlinear element improves stability margin, we can use higher slope gain of dead-zone than that of nonlinear controller using dead-zone only. In the linear controller design, it is shown that the lead-lag control has an improved stability margin over PID control. Numerical simulation results and experimental results show that the proposed method can get better performance to the external shock than previously proposed methods.

• 한국미생물·생명공학회지
• /
• 제21권4호
• /
• pp.354-365
• /
• 1993

A novel control method with automatic tuning of PID controller parameters has been developed for efficient regulation of dissolved oxygen concentration in fed-batch fermentations of Escherichia coli. Agitation speed and oxygen partial pressure in the inlet gas stream were chosen to be the manipulated variables. A heuristic reasoning allowed improved tuning decisions from the supervision of control performance indices and it coule obviate the needs for process assumptions or disturbance patterns. The control input consisted of feedback and feedforword parts. The feedback part was determined by PID control and the feedforward part is determined from the feed rate. The proportional gain was updated on-line by a set of heuristics rules based on the supervision of three performance indices. These indices were output error covariance, the average value of output error, and input covariance, which were calculated on-line using a moving window. The integral and derivative time constants were determined from the period of output response. The specific growth rate was maintained at a low level to avoid acetic acid accumulation and thus to achieve a high cell density. The specific growthe rate was estimated from the carbon dioxide evolution rate. In fed-batch fermentation, the simutaneous control of dissolved oxygen concentration (at 0.2; fraction of saturated value) and specific growth rate (at 0.25$hr^{-1}$) was satisfactory for the entire culture period in spite of the changes in the feed rate and the switching of control input.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.719-720
• /
• 2006

In the mechanical system, optimization of motion control is very essential in the aspect of automation technique progress. In the servo system, the function of controller is very important but most of the controllers have played only the role of pulse generator because the controller with main function is very expensive. In this thesis, the system was composed of PC, commonly used driver AC servo motor and a produced control board. The PC transmit a gain, a locus data to a driver and controller. At the same time, it converts imformation from the controller and convert them into data and offer an output with graph. The role of a controller is to trasmit a locus data to a driver and counting the pulse on the phase of an encoder to the PC. We have performed the experiment in order to confirm with variable PID parameter capable of the optimization of gain tuning with the counting of feedback control sensor signal with regard to the external interface into the system, such as torque. Based on the experiment result, we have confirmed as follows: First, it was confirmed that we could easily input control factors P.I Gain, constant $K_P,\;K_I$ into PC. Second, not only pulse generator function was possible, but with this pulse it was also possible to count using software with PIC chip. And third, using the multi-purpose PIC micro chip, simple operation and the formation of small size AC Servo Controller was possible.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.577-585
• /
• 2015

This paper deals with development of an autopilot system for leisure yacht based on NMEA 2000 network and android platform. The developed system can operate both for manual steering and automatic navigation mode. In automatic steering mode, after manipulation of commands which are NMEA 0183 sentences by android platform, the developed system translates and sends the packets through NMEA 2000 network. Then the controller which is connected to NMEA 2000 network receives the commands and controls the boat's rudder system automatically. The automatic steering mode is achieved by cooperation of two controllers; one for controlling the rudder system, and the other for controlling the vessel's heading. To control the vessel's rudder and heading angle two PID controllers are developed with an adjustable dead-band gain. Also, in order to eliminate the steady-state error occurred by applying dead-band, an integral controller which specifically supervises the system's behavior inside the dead-band area is developed. In this paper, at the first stage, simulations are accomplished using computer in order to examine the feasibility of the proposed based on simulation results. In the next step, the system on a real hydraulic steering model is implemented and at the end the performance examination by implementing it on a real boat and doing test navigation is executed.