• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.96-106
• /
• 2001

As the drilling depth increases, the cutting torque increases and fluctuates, which can lead to the machine tool vibration, severe tool wear, and catastrophic tool breakage. Hence, cutting torque control is very important to improve productivity in drilling. In this paper, a PID controller was designed to control the drilling torque. The plant including the feed drive system, cutting process and spindle drive system was modeled for controller design. The Ziegler-Nichols method was used to determine the controller gain and control action times and the root locus plot was used to tune the controller gain for a certain cutting condition. Also, suggested was a simple method to obtain the tuned controller gain for an arbitrary cutting condition not using the Ziegler-Nichols method and the root locus plot. The performance of the designed controller and the effect of controller gain tuning were verified from experiments.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.380-387
• /
• 1994

An experimental study was performed to investigate the characteristics of refrigerant flow rate control and superheat in an evaporator with an electronic expansion valve(EEV). The EEV used in this study was devised using a needle valve coupled with a stepping motor controlled by a personal computer. A Pill control equation was used to control the superheat of the evaporator and to set the superheat to $5^{\circ}C$. In order to determine an optimum running condition for the system, Pill parameters were varied for the wide range of values. The running condition of an air conditioning system with a PI control was reasonably stable compared with that of the Pill control. Experimental results for the PI control using parameter values, $K_p=1.5$, $T_i=400(sec)$ and $T_s=6(sec)$ show that the superheat reached its target value. When external disturbances were introduced to the system, the superheat target value was reached within about 3 minutes. When the EEV was applied to the air conditioning system driven by an inverter, room temperature control was excellent.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.247-252
• /
• 2007

The container crane is one of the most important equipments at container terminal. If its working time in cycle could be reduced then container terminal efficiency and service level can be increased. So there are many i1forts to reduce working time of container cranes. It means how to design the controller with good performance which has small overshoot and swing motion of container crane. We, in this paper, present a state feedback controller based on LQ theory incorporating a RCGA which means real-coded genetic algorithm RCGA can search state feedback gains under given objective function. A set of simulation works are carried out in order to prove the control effectiveness of the proposed methods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.399-404
• /
• 2006

The container crane is one of the most important equipment in container terminal. If its working time in cycle could be reduced then container terminal efficiency and service level can be increased. So there are many efforts to reduce working time of container crane. It means how to design the controller with good performance which has small overshoot and swing motion of container crane. We, in this paper, present a state feedback controller not based on LQ theory but RCGA which means real-coded genetic algorithms. RCGA can search state feedback gains in given objective function. several cases of simulations are carried out in order to prove the control effectiveness of the proposed methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.6
• /
• pp.573-580
• /
• 2009

In this paper, we develop a functional test model for magnetic bearing wheels. The functional test model is an electromagnetic levitation system that has three degree of freedom, which consists of one axial suspension from gravity and two axes gimbaling capability to small angels. A nonlinear controller with high-gain observers is proposed and the real-time experiment results show that the rotor is accurately levitated at the desired position and well-balanced, which is a suitable result for the potential use an magnetic bearing wheels. Also, the proposed scheme exhibits better performance when it is compared with the conventional PID control method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.404-407
• /
• 2001

In this paper, hydro-turbine system is modelled. Real input and output signals are acquired from the hydro-turbine system and the parameters of the model are estimated using input-output data, the model adjustment technique and a genetic algorithm(GA). To verify feasibility of the propose(1 model, computer simulations using GA have been carried out. The results show excellent characteristics of the proposed modeling and identification of the hydro-turbine system.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.119-123
• /
• 2001

본 논문에서는 자동화 사격장 Pop-Up시스템의 안정성 및 성능 향상을 위해 예측제어기를 설계하여 시간지연에 따른 문제를 보상하였다. 확률 모델에 기반한 예측제어기는 지연된 이전의 값들로부터 선형예측 기법과 확률함수를 이용하여 실제의 값을 추정하며, 이를 제어기에 적용하여 시간지연에 따른 문제점을 최소화하였다. 제안된 알고리즘의 타당성을 검정하기 위해 사격용 Pop-Up시스템에 본 알고리즘을 실현하였으며, 상이한 시간지연과 이득 변화에 따른 제어기의 성능을 관측하였다. 실험결과 제안된 예측제어기는 시간지연에 대해 PID 제어기보다 빠른 수렴 특성을 보이며, 제어기의 안정범위 내에서 허용할 수 있는 최대 시간지연 값도 증가시킬 수 있었다. 따라서 사격용 타겟의 Pop & Up동작이 제어시간 이내에 원활하게 작동되어 연속 사격의 실시간 제어를 효율적으로 수행하였다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.237-239
• /
• 2017

The isolated boost DC-DC converter based on three switches in fuel cell applications is presented in this paper. The major advantages of the proposed converter are as follows: continuous input current; decrease one active switch and no use snubber circuit. The operating principles and analysis of the proposed converter have been discussed. A 400 W prototype has been tested in the laboratory to verify the performance of the proposed converter and a PID controller was used to clarify the DC output voltage at 400 V. The simulation and experimental results are shown to validate the theoretical analysis.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.173-174
• /
• 2007

In this paper, a new speed sensorless control based on an instantaneous reactive power and a fuzzy PI compensator are proposed for the interior permanent magnet synchronous motor (IPMSM) drives. The conventional fixed gain PI and PID controllers are very sensitive to step change of command speed, parameter variations and load disturbance. Also, to the estimated speeds are compensated by using an instantaneous reactive power in synchronously rotating reference frame. In a fuzzy compensator, the system control parameters are adjusted by a fuzzy rule based system, which is a logical model of the human behavior for process control. The effectiveness of algorithm is confirmed by the experiments.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.10-12
• /
• 2004

Recently, Datta at al. [1] have developed a metDattad of obtaining the complete set of stabilizing PI, PID controllers for a given LTI system, in which tDattase are determined by solving a set of linear inequalities parameterized by the proportional(P) gain. In this paper, we provide a note about Dattaw Datta's idea can be extended to the problem of finding all stabilizing PD controllers and about an improved metDattad that allows us to calculate the admissible range of P gain more rigorously. An illustrative example is given.