• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.239-245
• /
• 2012

This paper proposes a novel optimum design method for the PID controller of magnetic levitation-based Rail-Guided Vehicle(RGV) by a genetic algorithm using clone selection method and a new performance index function with performances of both time and frequency domain. Generally, since an attraction type levitation system is intrinsically unstable and requires a delicate controller that is designed considering overshoot and settling time, it is difficult to completely satisfy the desired performance through the methods designed by conventional performance indexes. In the paper, the conventional performance indexes are analyzed and then a new performance index for Maglev-based RGV is proposed. Also, an advanced genetic algorithm which is designed using clonal selection algorithm for performance improvement is proposed. To verify the proposed algorithm and the performance index, we compare the proposed method with a simple genetic algorithm and particle swarm optimization. The simulation results show that the proposed method is more effective than conventional optimization methods.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.75-79
• /
• 2002

본 논문에서는 선박 디젤엔진의 속도를 조절함에 있어서 환경 변화에서도 지속적으로 만족스러운 성능을 유지하도록 시스템 파라미터 추정자, 제어기 계수 수정자를 결합한 자기동조 PID 제어기를 설계한다. 유전알고리즘을 기반으로 한 온라인 추정자가 시스템의 파라미터를 추정하면, 제어기 계수 수정자는 제안한 동조규칙으로 계수를 조정하게 된다. 이를 위해 시스템을 시간지연 1차 모델로 근사화하여 유전알고리즘 기반으로 그 파라미터를 온라인 추정하는 문제를 다룬다. 제안한 방법의 성능은 B&W사의 4L80MC 디젤엔진을 제어대상으로 퍼지모델을 얻고 모의실험을 통하여 확인한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.598-603
• /
• 2004

An optical head actuator of an optical disk drive consists of two servo mechanisms for the focusing and the tracking to acquire data from disk. As the rotational speed of the disk grows, the utilized lag-lead-lead compensator has known to be above its ability for precisely controlling the optical head actuator. To overcome the difficulty, this paper propose a new controller design method for optical head actuator based fuzzy proportional-integral-derivative (PID) control and the genetic algorithm(GA). It employs a two-stage control structure with a fuzzy PI and a fuzzy PD control and is optimized by the GA to yield the suboptimal fuzzy PID control performance. It is shown the feasibility of the proposed method through a numerical tracking actuator simulation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.261-266
• /
• 2002

In this Paper, we Propose model-based tuning rules of the PID controller incorporating with genetic algorithms. Three sets of optimal PID parameters for step set-point tracking are obtained based on the first-order time delay model of plants and a genetic algorithm which minimizes performance indices(IAE, ISE and ITAE). Then tuning rules are obtained using the tuned parameter sets, potential rule models and a genetic algorithm. Simulation is carried out to verify the effectiveness of the proposed rules.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.475-481
• /
• 2009

Real-coded genetic algorithm(RCGA) has better performances than conventional genetic algorithm about dealing with a large domain, the precision and the constrain problem. Also the RCGA has advantage of operation time because it doesn't have to following about decoding operation. In this paper the ranges of PID gains are limited based on Ziegler-Nichols method to consider a long operation time problem that is the main problem of genetic algorithm. Result shows proposed method represents better performance without ignored about result of ZN tuning method and reduces the calculation time.

• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.57-64
• /
• 2002

The system that is thermal test system for elements has been controlled generally by PID algorithm because of its characteristic. There is not a mathematical model for the system. So the system that is use the PID controller is not properly operated. To solve this problem, we propose a fuzzy algorithm that parameters and rule base is selected by self-searched algorithm for each system. The input fuzzy membership function is adapted based on the set stable range. Output membership function is nearly fixed but some parameter is adjustable. The rule base is changed under basis on the system response. The output value computed through inference and defuzzification is mapped into a value that is proper for the system operation. Through this regulation, it will be possible to prevent the temperature of system to go into the unstable temperature.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.87-95
• /
• 2007

In this paper, we analyzed the mr detection and the stability of the object tracking system by an adaptive stereo object hacking using region-based MAD(Mean Absolute Difference) algorithm and the modified PID(Proportional Integral Derivative)-based pan/tilt controller. That is, in the proposed system, the location coordinates of the target object in the right and left images are extracted from the sequential stereo input image by applying a region-based MAD algorithm and the configuration parameter of the stereo camera, and then these values could effectively control to pan/tilt of the stereo camera under the noisy circumstances through the modified PID controller. Accordingly, an adaptive control effect of a moving object can be analyzed through the advanced system with the proposed 3D robot vision, in which the possibility of real-time implementation of the robot vision system is also confirmed.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.257-262
• /
• 2019

Recently, with a great deal of attention and utilization to the UAV like a drone, many application cases using UAV in various fields have been proliferated rapidly. These UAV, however, has many risks like balance deviation and drone crash due to the external environmental factors. The attitude control algorithm for UAV is the most important portion in order to maintain the safe management of UAV, and the best solution is PID control algorithm which is generously used and almost perfect attitude control technology nowadays. In this paper, we propose the smart attitude control algorithm using fuzzy logic in order to provide safe and continuous attitude control against external environmental factors, and compare the performance through simulation study between PID and our algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.701-708
• /
• 2017

This paper proposes an optimum design method using Teaching-Learning-based optimization for the fuzzy PID controller of Magnetic levitation rail-guided vehicle. Since an attraction-type levitation system is intrinsically unstable, it is difficult to completely satisfy the desired performance through the conventional control methods. In the paper, a fuzzy PID controller with fixed parameters is applied and then the optimum parameters of fuzzy PID controller are selected by Teaching-Learning optimization. For the fitness function of Teaching-Learning optimization, the performance index of PID controller is used. To verify the performances of the proposed method, we use a Maglev model and compare the proposed method with the performance of PID controller. The simulation results show that the proposed method is more effective than conventional PID controller.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2009

In SIL-based NFR servo systems, the residual error and the overshoot that are occurred in the process of the modes-witching servo which consists of approach, gap-control modes, and safety mode are reduced by using PID controller. However, the design method of conventional PID controller is not sufficient for the stable air gap control system. Therefore, the optimal PID controller using LQR manner is more useful to find the designed parameters of PID controller. In this paper, we show that the performance of the optimal PID controller is better than that of the lead-lag controller.