In resist-discharge printing of cotton fabrics with reactive/reactive dyes the effects of intermediate drying on the white and the colored resist-dischargeabilities were studied. From the results of resist-discharge printing in case of 75% pick up, it was found that the most effective condition of intermediate drying which could at once prevent bleeding and improve the resist-dischargeability was 11$0^{\circ}C$ x 1min. The drying condition of 10$0^{\circ}C$ x 2min or 12$0^{\circ}C$ x 1min can be also recommended. It is important to pay close attention to the intermediate drying temperature and time. Because in case of 75% pick up when drying was carried on at 11$0^{\circ}C$ or 12$0^{\circ}C$ for more than 1 minute the resist-dischargeability was greatly lowerd by the fast fixation of ground color caused by high temperature, and in case of 100 % pick up the insufficient drying of ground color caused the resist-dischargeability to lower with giving rise to various troubles such as bleeding and smearing.
목적: Encoded healing abutment와 scan body를 이용한 디지털 인상과 pick-up 인상용 코핑을 이용한 인상 채득법의 정확도를 다른 임플란트 식립 각도에서 비교 연구하고자 하였다. 연구 재료 및 방법: 3D 프린터를 이용해 주모형을 제작하고 0°, 10° 및 20°의 근심경사로 3개의 임플란트를 위치 시켰다. 각각의 임플란트에 지대주를 체결하고 주모형을 스캔하여 참조 모델을 만들었다. P군 모델은 pick-up 인상용 코핑을 사용하여 15개의 석고 모형을 만들고 지대주를 장착 후 스캔하여 제작하였다. E군과 S군의 모델은 각각 encoded healing abutment와 scan body를 주모형에 체결하고 구내 스캐너를 이용해 15회씩 인상채득을 하여 제작하였다. 각각의 실험군 STL 파일은 best fit alignment를 이용해 참조 모델과 중첩하였고 root mean square (RMS) 값을 분석하였다. 결과: RMS 값은 P군에서 가장 작았고(25.56 ± 2.53 ㎛), 그다음 S군(35.27 ± 2.56 ㎛), E군(38.29 ± 4.12 ㎛) 순 이었다. S군과 E군 사이에는 유의차가 없었고, P군은 S군과 E군 보다 작았다(P < 0.05). 임플란트 각도와 RMS 값의 상관관계는 E군에서 유의하였다(P < 0.05). 결론:Pick-up 인상용 코핑 방법은 encoded healing abutment와 scan body 인상 채득 방법에 비해 더 높은 정확도를 보였고 encoded healing abutment와 scan body 인상 방법은 정확도에서 유의한 차이가 없었다. Encoded healing abutment의 임상적 사용은 가능하나 경사진 임플란트의 인상의 경우 주의하여 사용해야 할 것으로 사료된다.
본 연구에서는 퇴적층 암석에서 픽 커터의 절삭성능을 평가하기 위하여 선형절삭시험을 수행하였다. 중국에서 채취된 Linyi사암과 역암을 모사한 콘크리트를 시험체로 사용하였다. 소규모 선형절삭시험장비를 이용하여 다양한 절삭조건하에서 절삭조건에 따른 커터작용력과 비에너지의 변화양상을 평가하였다. 커터작용력은 두 가지 재료 모두에서 압입깊이와 커터간격이 증가함에 따라 증가하는 경향을 나타내었고 재료의 강도에 영향을 받는 것으로 나타났다. 반면 최대작용력과 평균작용력의 비율은 재료의 강도에 영향을 받기 보다는 재료의 구성 물질과 절삭특성에 영향을 받는 것으로 판단되었다. 절삭계수는 암석과 픽 커터의 마찰 특성에 영향을 받으나 절삭조건에는 영향을 받지 않는 것으로 나타났다. 따라서 절삭계수와 픽 커터 작용력의 합력방향에 따라 암석의 특성을 고려한 최적의 절삭각도를 선정해야 할 것으로 판단되었다. 한편 절삭조건에 따른 비에너지의 변화양상으로부터 최적 절삭조건을 규명하였다. 두 가지 재료에서 최적 s/p비는 2~4 범위로 도출되었고, 압입깊이가 증가함에 따라 비에너지는 감소하는 경향을 나타내었다. 본 연구의 결과는 픽 커터의 절삭메커니즘 규명을 위한 데이터베이스로 활용될 수 있으며, 픽 커터를 사용한 기계굴착장비의 설계에 활용될 수 있을 것으로 기대된다.
농업현장에서는 각종 작물을 재배할 때, 작물 성장을 빠르고 효과적으로 하기 위하여 일정한 크기로 성장한 묘를 밭으로 옮겨 심게 되는데, 이러한 묘 정식작업을 수행할 때 채소 정식기가 사용된다. 본 채소 정식기는 인력에 의존하고 있는 채소 정식작업의 기계화를 촉진하기 위하여 2조식의 전자동 육묘트레이 공급 및 취출된 묘를 식부호퍼에 이송할 수 있도록 개발하였다. 또한 두 가지 취출방식에 따른 묘 결주율을 비교하여 판단하였다. 핑거타입 묘 취출 시험결과 256주 묘에서 묘를 뽑아내지 못하는 경우가 17주, 상토가 부서지는 경우가 15주 등 결주율이 13.7%로 나타났으며, 포크타입 묘 취출 시험결과 200주 묘에서 묘는 100% 뽑아내지만 이송 중 낙하되는 경우가 6개 등 결주율이 4%로 나타났다. 따라서 전자동 2조식 정식의 묘 취출장치로서 포크타입이 적당한 것으로 판단되었다.
본 연구에서는 페라이트 링 코어를 이용한 2차원 fluxgate 센서를 제안하였으며, 본 fluxgate 센서 시스템은 2차원 자장을 측정할 수 있는 센서와 그 센서를 구동하기 위한 구동회로, 그리고 신호처리회로 등으로 구성하였다. 신호 검출 방법으로는 우수고조파 성분 검출을 위해 PSD(phase sensitivity detector) 회로를 사용하였으며, 기존의 제 2고조파 검출법과 비교하기 위해서 pick-up 코일 출력전압의 제 2고조파 성분을 FFT 스펙트럼 분석기를 사용하여 측정하였고, 이렇게 측정된 제 2고조파 성분의 전압과 PSD 단의 출력전압을 비교하였다. 그 결과 여자전류의 증가에 따라 센서의 출력전압도 증가하였으며, 구동주파수에 따른 PSD 단의 출력전압은 주파수가 1.5[kHz]일 때까지는 증가하였지만, 그 이상의 주파수에서는 감소함을 보였다. 그리고 pick-up 코일의 제 2고조파 성분의 전압은 계속 증가함을 보였다. 센서의 최대감도는 구동주파수 1.5 [kHz], 구동전류 2 [App]에서 최대값을 보였으며 감도는 약 1580 [V/T]였다. 센서의 비선형계수는 3 [G] 이내에서 제 2고조파 성분의 전압인 경우 약 1 [%]이내였으며, PSD 단 이후는 약 2.3 [%]이내였다. 그리고 각도오차는 약 ${\pm}2$ [%/FS]이내였다.
This paper describes a MEMS-based micro-fluxgate magnetic sensing element using Ni$\_$0.8/Fe$\_$0.2/ film formed by electroplating. The micro-fluxgate magnetic sensor composed of a thin film magnetic core and micro-structured solenoids for the pick-up and the excitation coils, is developed by using MEMS technologies in order to take advantage of low-cost, small size and lower power consumption in the fabrication. A copper with 20um width and 3um thickness is electroplated on Cr(300${\AA}$)/Au(1500${\AA}$) films for the pick-up(42turn) and the excitation(24turn) coils. In order to improve the sensitivity of the sensing element, we designed the magnetic core into a rectangular-ring shape to reduce the magnetic flux leakage. An electroplated permalloy film with the thickness of 3 $\mu\textrm{m}$ is obtained under 2000Gauss to induce magnetic anisotropy. The magnetic core has the high DC effective permeability of ∼1,100 and coercive field of -0.1Oe. The fabricated sensing element using rectangular-ring shaped magnetic film has the sensitivity of about 150V/T at the excitation frequency of 2MHz and the excitation voltage of 4.4Vp-p. The power consumption is estimated to be 50mW.
The efficiency of nuclear transfer using donor embryos originated from ovum pickup(OPU) and activated recipient cytoplasts were examined for induction of twinning in Korean native cattle(KNC). After aspiration of follicle by OPU, regardless of the vacuum applied, we obtained same result in proportions of recovered cumulus-oocyte complex (COCs) with compact cumulus. Under electric stimulation(1.0kV/cm DC for $40{\mu}s$), most of activated oocytes proceed to anaphase II/telophase II within 3h(84.7%). In the treatment of oocyte activation, the preactivation which was performed before fusion had significant effect on the developmental rates to morula/blastocyst stage(9.4 vs 4.0%). In embryo transfer of nuclear transferred embryos, we obtained 2 twins from KNC recipients and 1 twin from a Holstein recipient. Our results showed that it is possible to obtain twins using nuclear transfer technique in KNC.
This paper describes a MEMS-based micro-fluxgate magnetic sensing element using Ni$\_$0.8/Fe$\_$0.2/ film formed by electroplating. The micro-fluxgate magnetic sensor composed of a thin film magnetic core and micro-structure solenoids for the pick-up and the excitation coils, is developed by using MEMS technologies in order to take advantage of low-cost, small size and lower power consumption in the fabrication. A copper with 20${\mu}$m width and 3${\mu}$m thickness is electroplated on Cr (300${\AA}$) / Au (1500${\AA}$) films for the pick-up (42turn) and the excitation (24turn) coils. In order to improve the sensitivity of the sensing element, we designed the magnetic core into a rectangular-ring shape to reduce the magnetic flux leakage. An electroplated permalloy film with the thickness of 3${\mu}$m is obtained under 2000 gauss to induce magnetic anisotropy. The magnetic core has the high DC effective permeability of ~1,100 and coercive field of ~0.1 Oe. The fabricated sensing element using rectangular-ring shaped magnetic film has the sensitivity of about 150 V/T at the excitation frequency of 2 MHz and the excitation voltage of 4.4 V$\_$p p/. The power consumption is estimated to be 50mW.
Estrus cycle of cow, season and follicldar stimulating treatment, having an effect on the number of follicle, are investigated for the oocyte recovery rate in ovum pick-up(OPU). The number of follicle aspirated and oocyte collected on the different days of estrus cycle(D 4~5, D 9~10 and D 14~15) were not significantly different among the groups. The higher number of viable oocytes were produced on Jan-May(79.0%) than Jun-Aug(33.3%) by OPU in cow. The number of follicle and aspirated oocyte in cows treated FSH or PMSG combined with bovine somatotropin(bST) were 1.2~1.5 times higher than in cows treated alone follicular stimulating hormone(FSH) or pregnant mare serum gonadotropin(PMSG). In conclusion, OPU can be repeatedly practiced 2 or 3 times in an estrus cycle. In addition, the high environmental temperature is not good for ovarian function of cow and the bST co-treatment with FSH or PMSG is increasing the number of aspiratable follicle.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.