• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.841-844
• /
• 2013

This paper suggests methods to drive motor and dsPIC30F2010 microprocessor software design for the Wheel Hub Motor that is incorporated into a hub of the wheel and drives it directly. The minimum function of dsPIC30F2010, system clock, PWM, I/O, communication, applicable to hub motor control are explained and tested. The algorithm including PI control method was implemented to the system by using dsPIC30F2010 microprocessor functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.37-52
• /
• 2004

In this paper, Multistage Adaptive Partial PIC eliminating effectively the multiple access and multipath interference for DS-CDMA based W-CDMA uplink system is designed and its performance is evaluated with computer simulation. By adaptively controlling the slope of the soft limiter with received signals, the efficiency of the soft limiter can be maximized and the better performance is obtained by solving error floor problem using further precise generation of interference signal. As a result, The proposed Multistage Adaptive Partial PIC with simple optimizing method for time-variant channel showed optimum performance at fewer stages. Besides fewer stages, the interference cancellation at the output of the rake receiver considerably reduced system complexity. The Multistage Adaptive Partial PIC with precise generation and efficient cancellation of interference signal can solve error eoor problem, resulted from initial false detection and improve system performance of high data rate system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.267-272
• /
• 2017

Piceatannol (PIC) is a natural hydroxylated analog of resveratrol (RSV), which is a polyphenol known to extend lifespan by stimulating sirtuins. The aim of this study was to investigate the effects of PIC and RSV on the toll-like receptor 4 (TLR4)-nuclear factor kappa B ($NF-{\kappa}B$) pathway in mouse hepatocytes and an obese/diabetic KK/HlJ mouse model. AML12 mouse hepatocytes in the absence or presence of palmitic acids (PA) were treated with PIC ($50{\mu}M$) or RSV ($50{\mu}M$). Male KK/HlJ mice at 20 weeks of age were divided into three subgroups as follows: 1) obese and diabetic control (KK), 2) KK_PIC, and 3) KK_RSV. PIC and RSV were administered orally at a dose of 10 mg/kg/d for 4 weeks. Four weeks of PIC and RSV treatment did not affect body weight or food intake in KK mice. Serum fasting blood glucose was significantly reduced in KK_PIC, and 2 h oral glucose tolerance test area under the curve was significantly reduced by PIC and RSV treatment in KK mice. PIC tended to improve homeostasis model assessment of the insulin resistance index (HOMA-IR) and HOMA beta-cells in diabetic KK mice. TLR4 and $NF-{\kappa}B$ were down-regulated by PIC and RSV treatments in hepatocytes in the absence or presence of PA. Insulin receptor, AMP-activated protein kinase, peroxisome proliferator-activated receptor gamma, nucleotide oligomerization domain-like receptor family pyrin domain-containing 3, interleukin-1, and $NF-{\kappa}B$ were altered in PIC-treated livers. Collectively, PIC and RSV inhibited the $TLR4-NF-{\kappa}B$ pathway, and PIC seems to be more effective than RSV in the regulation of analyzed targets, which are involved in insulin signaling and inflammation in vivo.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.459-462
• /
• 2002

This paper presents the development or a keypad test system for the improvement or the working environment and productivity improvement using the microprocessor PIC16F877 Chip. In order to detect the fault of keypad products, the design of hardware and software is performed in this system. All controls of the system is implemented by the 8 bit one chip micro-controller PIC. This keypad test system can also recognizes the work process, the work result and the fault position of the keypad which is made by the method of a flexible printed circuit (FPC) and construct the database about test results using personal computer. The experimental results show the effective performance of the keypad test system.

• Biomolecules & Therapeutics
• /
• v.9 no.4
• /
• pp.277-281
• /
• 2001

Chromium is an essential nutrient and participates in glucose and lipid metabolism in human beings and animals. The present study was conducted to assess the effects of chromium picolinate (Cr-pic) on glucose tolerance and insulin sensitivity in type I and ll diabetic rats. The experimental groups were type I diabetic (streptozotocin-induced: 40 mg/kg, i.p.) and type II diabetic (Goto-Kakizaki rats) models. Each group was subdivided into control. low-dose and high-dose of Cr-pic treated groups. The Cr-pic was orally administered with Cr-pic (100 mg/kg for low dose group and 200 mg/kg for high dose group) for 4 weeks. And then we performed intraperitoneal glucose tolerance test (IPGTT) and insulin sensitivity test (ITT). The glucose tolerance test was carried out by inection of glucose (2 g/kg, i.p.). The peripheral insulin sensitivity test was con- ducted by injection of insulin (5 units/kg, s.c.) and glucose. We performed determining of blood glucose concentration at 0, 10, 30, 60, 90, and 120 min using automated glucose analyzer. The plasma insulin concentration was determined by rat insulin EIA kit. Administration of Cr-pic improved weight gain in all group s with higher significant in the low-dose group. There was no significance between the control and the Cr-pic treated groups in the area under the blood glucose curve and serum insulin concentration plots of IPGTT and peripheral ITT in type I diabetic rats. But Cr-pic treated groups showed significantly lower levels of the area under the blood glucose currie during IPGTT and ITT and the high-dose group showed less effects compared with the low-dose group in the type II diabetic rats. The plasma insulin concentration of both diabetic groups was not influenced by Cr-pic supplementation. We can conclude that chromium picolinate may improve the endogenous and exogenous insulin action and peripheral insulin sensitivity in type II diabetic rats.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1373-1374
• /
• 2007

We has been synthesized $(POB)_{2}Ir(pic)$ as a red emitting materials and evaluated in the organic light emitting diodes (OLED). The layer of $Alq_3$ doped with $(POB)_{2}Ir(pic)$ as emitters has been demonstrated. The structure of the device is ITO/ NPB (40 nm) / $Zn(HPB)_2$ (40 nm)/ $Alq_3$ : $(POB)_{2}Ir(pic)$ (30 nm) / LiF / Al. We varied the doped rate of $(POB)_{2}Ir(pic)$. The doped rate is 0.4 %, 0.6%, 0.8 and 1.2%, respectively. When the doped rate of the $Alq_3$:$ Ir(POB)_{2}(pic)$ was 0.6%, white emission is achieved. The Commission Internationale de l'Eclairage (CIE) coordinates of the white emission are (0.316, 0.331) at an applied voltage of 10.75V.

• Composites Research
• /
• v.33 no.3
• /
• pp.108-114
• /
• 2020

Piecewise Integrated Composite (PIC) beam is composed of different stacking against loading type depending upon location. The aim of current study is to assign robust stacking sequences against external loading to every corresponding part of the PIC beam based on the value of stress triaxiality at generated reference points using the k-NN (k-Nearest Neighbor) classification, which is one of representative machine learning techniques, in order to excellent superior bending characteristics. The stress triaxiality at reference points is obtained by three-point bending analysis of the Al beam with training data categorizing the type of external loading, i.e., tension, compression or shear. Loading types of each plane of the beam were classified by independent plane scheme as well as total beam scheme. Also, loading fidelities were calibrated for each case with the variation of hyper-parameters. Most effective stacking sequences were mapped into the PIC beam based on the k-NN classification model with the highest loading fidelity. FE analysis result shows the PIC beam has superior external loading resistance and energy absorption compared to conventional beam.

• Composites Research
• /
• v.36 no.1
• /
• pp.53-58
• /
• 2023

The PIC design method is assigning different stacking sequences for each shell element through the preliminary FE analysis. In previous study, machine learning was applied to the PIC design method in order to assign the region efficiently, and the training data is labeled by dividing each region into tension, compression, and shear through the preliminary FE analysis results value. However, since buckling is not considered, when buckling occurs, it can't be divided into appropriate loading type. In the present study, it was proposed PIC-NTL (PIC design using novel technique for analyzing load type) which is method for applying a novel technique for analyzing load type considering buckling to the conventional PIC design. The stress triaxiality for each ply were analyzed for buckling analysis, and the representative loading type was designated through the determined loading type within decision area divided into two regions of the same size in the thickness direction of the elements. The input value of the training data and label consisted in coordination of element and representative loading type of each decision area, respectively. A machine learning model was trained through the training data, and the hyperparameters that affect the performance of the machine learning model were tuned to optimal values through Bayesian algorithm. Among the tuned machine learning models, the SVM model showed the highest performance. Most effective stacking sequence were mapped into PIC tube based on trained SVM model. FE analysis results show the design method proposed in this study has superior external loading resistance and energy absorption compared to previous study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.448-451
• /
• 2001

일반적으로 전기기기는 사람의 스위칭조작으로 작동이 되고 있다. 이를 개선하기 위하여 본 연구는 전기기기의 자동 스위칭과 홈네트워킹을 위한 제어용 임베디드 시스템을 설계하고, 제작하였다. 설계 제작한 제어 시스템은 PIC16F84에서 접근 센서의 입력 신호를 이용하여 전원 단속, 기기의 on/off를 수행하였으며, 내부의 상태를 감지하여 기기의 상태 표시용LED구동, 솔레노이드 밸브의 open/close 기능을 부여하였다. 본 임베디드 시스템은 통신 모듈을 구성하여 PIC의 기능을 강화하면 홈네트워킹용 시스템으로 발전할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.145-149
• /
• 2001

This paper did so that may can establish optimum temperature according to kind of vaccine and digitalized various action situations using PIC 16C74A-04A/SP. Also, PID Algorithm Controller designed to maintain optimum temperature using PIC. Begin to operating system after temperature setting, reached in optimum storage temperature within 30 minutes.