• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.31-40
• /
• 2018

We designed and implemented the attachable smart adapter for the general management of each company's agricultural machine regardless of whether it is equipped with a CAN (Controller Area Network) module. The smart adapter consists of a main board (Raspberry Pi3B), which operates agricultural machine's management software in Linux environment, and a self-developed interface board for power adjustment and status sensing. For the status monitoring, a sensing interface using a serial input was defined between the smart adapter and the sensors of the agricultural machine, and the state diagram of the agricultural machine was defined for diagnosis. We made a panel to simulate the sensors of the agricultural machine using the switch's on/off contact point, and confirmed the status monitoring and diagnostic functions by inputting each state of the farm machinery from the simulator panel.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.120-131
• /
• 2011

This paper proposes two control strategies for the bidirectional Z-source inverters (BZSI) supplied by batteries for electric vehicle applications. The first control strategy utilizes the indirect field-oriented control (IFOC) method to control the induction motor speed. The proposed speed control strategy is able to control the motor speed from zero to the rated speed with the rated load torque in both motoring and regenerative braking modes. The IFOC is based on PWM voltage modulation with voltage decoupling compensation to insert the shoot-through state into the switching signals using the simple boost shoot-through control method. The parameters of the four PI controllers in the IFOC technique are designed based on the required dynamic specifications. The second control strategy uses a proportional plus resonance (PR) controller in the synchronous reference frame to control the AC current for connecting the BZSI to the grid during the battery charging/discharging mode. In both control strategies, a dual loop controller is proposed to control the capacitor voltage of the BZSI. This controller is designed based on a small signal model of the BZSI using a bode diagram. MATLAB simulations and experimental results verify the validity of the proposed control strategies during motoring, regenerative braking and grid connection operations.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.115-116
• /
• 2016

ITER 전원장치(CPS: Coil Power Supply System)는 핵융합 초전도자석에 전기를 공급하는 중요설비로서 컨버터의 고장이나 초전도코일에 이상발생 시 주요장치들을 안전하게 보호하여야 한다. 이를 위해 설계된 전원장치 보호계통(PIS: Plant Interlock System)은 Event 발생 시에 언제든지 작동하여 전원장치를 보호할 수 있도록 높은 신뢰도가 요구된다. 본 논문에서는 ITER 설비의 중앙보호계통(CIS: Central Interlock System)과 전원장치 PIS의 계통연계 및 신호흐름을 분석하고, 신뢰도 계산을 위해 RBD(Reliability Block Diagram) 방법을 사용하여 PIS 모델을 구성한다. PIS 비가용도 계산은 Reliasoft사의 BlockSim 소프트웨어 툴을 사용하여 분석하고, 계산결과가 설계기준을 만족하는지 평가한다.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.61-70
• /
• 2023

This study presents an analytical study of investigating the effect of shock waves generated by the hydrogen detonation and damage to structures for the safety evaluation of hydrogen storage facilities against detonation. Blast scenarios were established considering the volume of the hydrogen storage facility of 10 L to 50,000 L, states of charge (SOC) of 50% and 100%, and initial pressures of 50 MPa and 100 MPa. The equivalent TNT weight for hydrgen detonation was determined considering the mechanical and chemical energies of hydrogen. A hydrogen detonation model for the converted equivalent TNT weight was made using design equations that improved the Kingery-Bulmash design chart of UFC 3-340-02. The hydrogen detonation model was validated for overpressure and impulse in comparison to the past experimental results associated with the detonation of hydrogen tank. A parametric study based on the blast scenarios was performed using the validated hydrogen detonation model, and design charts for overpressure and impulse according to the standoff distance from the center of charge was provided. Further, design charts of the three-stage structural damage and standoff distance of adjacent structures according to the level of overpressure and impact were proposed using the overpressure and impulse charts and pressure-impulse diagrams.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.425-433
• /
• 1983

Fatigue tests by axial loading (R=0.1) were carried out to investigate fatigue crack growth properties of small surface cracks in mild steel at room temperature, 250.deg. C and 400.deg. C, by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present tests are determined as a function of the stress intensity factor range, so that the applicability of liner fracture mechanics to the fatigue crack growth of surface cracks at elevated temperatures is investigated and discussed in comparison with the data of type 304 stainless steel at room temperature and elevated temperature. The obtained results are as follows: 1) Relations of both surface fatigue crack length and its depth to cycle ratio fall within a narrow scatter band in spite of different stress levels. 2) The .DELTA. .sigma. .root. .pi. a-da/dN relation of surface fatigue crack growth at room temperature is independent of the stress level and can be plotted as a straight line at log-log diagram, but the relation at 400.deg. C depends partly on the stress level. 3) Relations of the fatigue crack growth into depth d(2b)/dN and is stress intensity factor range .DELTA. $K_{I}$, accounted for the aspect ratio variation, fall within a narrow scatter band for wide range of the applied stress levels. And .DELTA. $K_{I}$E-d(2b)/dN relations of mild steel at different stress level coincide relatively well with the data of type 304 stainless steel. 4) The value of aspect ratio obtained by a beach mark method and a temper coloring method approaches about 0.9 in common with crack growth and it is independent of stress level and temperatures. 5) The equi-crack length curve is parallel to S-N$_{f}$ curve at elevated temperatures.s.s.s.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.1-13
• /
• 2020

Seasonal changes in river water vary seasonally as well as locationally, and the assessment is essential. In this study, we used the recent technique of post-classification by using the Google earth engine (GEE) to map the seasonal changes in Mahanadi river of Odisha. However,some fixed problems results during the rainy season that affects the livelihood system of Cuttack such as flooding, drowning of children and waste material deposit. Therefore, this study conducted 1) to map and analyse the water density changes and 2) to analyse the seasonal variation of river water to resolve and prevent problem shortcomings. Our results showed that nine types of variation can be found in the Mahanadi River each year. The increase and decrease of intensity of surface water analysed, and it varies in between -130 to 70 ㎥/nf. The highest frequency change is 2900 Hz near Cuttack city. The pi diagram provides the percentage of seasonal variation that can be observed as permanent water (30%), new seasonal (28%), ephemeral (12%), permanent to seasonal (7%) and seasonal (10%). The analysis is helpful and effective to assess the seasonal variation that can provide a platform for the development of Cuttack city that lies in Mahanadi delta.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3604-3613
• /
• 2022

The Physical Protection System (PPS) plays an important role and must effectively deal with various adversary attacks in nuclear security. In specific single adversary path scenarios, we can calculate the PPS effectiveness by EASI (Estimated Adversary Sequence Interruption) through Probability of Interruption (P_I) calculation. EASI uses a single value of the probability of detection (P_D) and the probability of alarm communications (P_C) in the PPS. In this study, we develop a multi-path analysis code based on EASI to evaluate the effectiveness of PPS. Our quantification method for P_I considers the variability and uncertainty of P_D and P_C value by Monte Carlo simulation. We converted the 2-D scheme of the nuclear facility into an Adversary Sequence Diagram (ASD). We used ASD to find the adversary path with the lowest probability of interruption as the most vulnerable paths (MVP). We examined a hypothetical facility (Hypothetical National Nuclear Research Facility - HNNRF) to confirm our code compared with EASI. The results show that implementing the variability extension can estimate the P_I value and its associated uncertainty. The multi-path analysis code allows the analyst to make it easier to assess PPS with more extensive facilities with more complex adversary paths. However, the variability of the P_D value in each protection element allows a significant decrease in the PI value. The possibility of this decrease needs to be an important concern for PPS designers to determine the P_D value correctly or set a higher standard for PPS performance that remains reliable.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.2
• /
• pp.71-80
• /
• 1999

We report zircon morphology of granitoids in the Mt. Keumjeong district, Pusan. There are a series of granitoids in the study area of the late Cretaceous: granodiorite, hornblende granite, adamellite, tonalite, biotite granite, and micrographic granite. Generally, the shapes of zircon crystals are short prismatic to middle prismatic and are dominant in {loo) prism and {101) pyramid in total average morphological data of the granitoids. The crystal forms of zircon in the granitoids can be distinguished by the PPEF diagram and the prism index (PI). The prism index values of zircon crystal forms in granodoirite and hornblende granite are higher than those of tonalite and micrographic granite. The finishing temperature range ($820~800^{\circ}C$) for crystallization of zircon crystals in granodoirite and hornblende granite is higher than the temperature ($790~770^{\circ}C$) at which the zircon crystals are created in tonalite and micrographic granite. The last differentiates (biotite granite and micrographic granite) have mainly intermediate zircon ({110)={100)) crystals, respectively. As differentiation proceeds, the zircons of granitoids become from short prismatic to middle prismatic in the each granitoid types.

• Economic and Environmental Geology
• /
• v.17 no.1
• /
• pp.17-34
• /
• 1984

The Ordovician limestone and dolomite was mineralized by the intrusion of quartz porphyry to form hydrothermal ore deposit along the fault shear zone, which trends $N30^{\circ}-40^{\circ}W$ dipping $60^{\circ}-70^{\circ}SW$. The primary manganese carbonates in the upper part of the deposit were oxidized to form supergene manganese ore deposits. The quartz porphyry is plotted mainly in granite region of the triangular diagram of normative composition. The granite phase contains more copper and lead, but less zinc, nickel and chromium than the granodiorite phase which occupies the northwestern part of the quartz porphyry. The content of copper, lead, zinc, nickel and chromium in the quartz porphyry is lower compared with the granitic rocks from the copper province in the Gyeongsang basin. But the granitic rocks from the lead-zinc province has lower content of copper and nickel than the quartz porphyry. The primary distribution pattern of trace elements in the country rock of limestone and dolomite has close relation with the hydrothermal mineralization, showing anomalous or high content near the fault shear zone. The secondary distribution pattern of trace elements in soils shows close relation with the solubility of the carbonates of the elements under weathering condition.