• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.723-735
• /
• 2018

Linear proportional-integral (PI) controllers are an attractive choice for controlling the speed of induction machines because of their simplicity and ease of implementation. Fractional-order PI (FO-PI) controllers, however, perform better than PI controllers because of their nonlinear nature and the underlying iso-damping property of fractional-order operators. In this work, an FO-PI controller based on the proposed first-order plus dead-time induction motor model and integer-order (IO) controllers, such as Ziegler-Nichols PI, Cohen-Coon PI, and a PI controller tuned via trial-and-error method, is designed. Simulation and experimental investigation on an indirect field-oriented induction motor drive system proves that the proposed FO-PI controller has better speed tracking, lesser settling time, better disturbance rejection, and lower speed tracking error compared with linear IO-PI controllers. Our experimental study also validates that the FO-PI controller maximizes the torque per ampere output of the induction machine and can effectively control the motor at low speed, in field-weakening regions, and under detuned conditions.

• 제어로봇시스템학회논문지
• /
• 제6권11호
• /
• pp.1013-1021
• /
• 2000

This paper suggests fuzzy-PI controllers for a heavy-duty gas turbine. The fuzzy-PI controllers are designed to regulate rotor speed and exhaust temperature of the gas turbine. The controller gains are tuned by genetic algorithm(GA). This paper also proposes a new fitness function of GA using a desired output response. The suggested controller is compared with previous controllers via simulations and it is shown that the rotor speed variation of our controller is smaller than those of previous ones.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.651-657
• /
• 2012

In many control fields high position performance is essentially required in reducing the over-shoot phenomena which is produced by improving the quick response in starting and in minimizing the variation of the response characteristic on disturbance and load variation In this paper, the design method for a position control is suggested for constructing the PI-PD controllers by using an internal PD feedback loop in PI and PD control system. Applying this method to the position control system used a DC servo motor as a driver, the transfer PI and PD controllers are designed simultaneously and the coefficients of these controllers are determined by using the transfer function of a plant and a proportional coefficient from mathematical technique. From the result of computer simulation in PI-PD control system by applying this control technique, we can verify the usefulness of this method in rejecting of over-shoot of starting, compensating of response variation on the load variation, and shorting the settling time.

• 한국지능시스템학회논문지
• /
• 제4권2호
• /
• pp.35-40
• /
• 1994

Fuzzy logic controllers are often found to behave better than PI controllers. One of the major reasons for this is that the fuzzy logic inferences used can produce nonlinear type controllers. For some applicatioins, howeveer, linear fuzzy logic controllers also perofrm better than PI controllers. In this paper, we examine linear fuzzy logic controllers to show that the truncation effects of the fuzzy logic controllers make them perform much better than the PI controllers. In terms of a performance index we used, the truncation effects reduced the index value by up to 80% for examples we studied.

• 한국지능시스템학회논문지
• /
• 제5권3호
• /
• pp.64-72
• /
• 1995

본 논문에서는 공정제어계의 PI제어기의 이득을 동조하는 방법을 다룬다. 산업계에서 사용되고 있는 제어기는 PI형이고, 이의 이득은 숙련조업자에 의하여 시행착오법으로 조정되고 있다. 따라서 제어기의 동조에는 많은 시간과 노력이 소요되며 다중루프를 갖는 공정의 경우에는 동조하기가 매우 어려운 실정이다. 본 논문에서는 다루는 퍼지동조기는 아래와 같은 가정하에서 개발되었다. 제어기는 아나로그 PI제어기이고 플랜트의신호는 On-line으로 받지만 동조는 off-line에서 이루어진다. 또한 동조를 위한 특징량을 플랜트로 부터 얻을 수 있어야 한다. 동조 방법은 퍼지논리를 사용하였으며, 개발된 퍼지동조기는 공정의 현재신호와 과거의 상태를 보여주며 동조된 새로운 PI제어기의 이득값을 제시한다. 퍼지동조기는 현장에서 여러실험을 통하여 성능을 검증하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.891-894
• /
• 1993

To improve limitations of fuzzy PI controller especially when applied to high order systems, we propose two types of fuzzy logic controllers that take out appropriate amounts of accumulated control input according to fuzzily described situations in addition to the incremental control input calculated by conventional fuzzy PI controllers. The structures of the proposed controller were motivated by the problems of fuzzy PI controllers that they generally give inevitable overshoot when one tries to reduce rise time of response especially when one tries to reduce rise time of response especially when a system of order higher than one is under consideration. Since the undesirable characteristics of the fuzzy PI controller are caused by integrating operation of the controller, even though the integrator itself is introduced to overcome steady state error in response, we propose two fuzzy controllers that fuzzily clear out integrated quantities according to situation. The first contr ller determines the fuzzy resetting rate by situations described fuzzily by error and error rate, and the second one by error and control input. The two structures both give reduced rise time as well as small overshoot. To show the usefulness of the proposed controller, that are applied to systems that are difficult to get satisfactory response by conventional fuzzy PI controllers.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.664-671
• /
• 2012

This paper presents the application of Unified Power Flow Controller (UPFC) in order to simultaneous control of power flow and voltage and also damping of Low Frequency Oscillations (LFO) at a Single-Machine Infinite-Bus (SMIB) power system installed with UPFC. PI type controllers are commonly used controllers for UPFC control. But for the sake of some drawbacks of PI type controllers, the scope for finding a better control scheme still remains. In this regard, in this paper the new IP type controllers are considered as UPFC controllers. The parameters of these IP type controllers are tuned using Genetic Algorithms (GA). Also a stabilizer supplementary controller based UPFC is considered for increasing power system damping. To show the ability of IP controllers, this controller is compared with classical PI type controllers. Simulation results emphasis on the better performance of IP controller in comparison with PI controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1050-1051
• /
• 2015

In industry, there are several different controllers which can be implemented for power conditioning systems (PCS) such as proportional-resonant (PR), predictive deadbeat (PD), or proportional-integral (PI) controller. But there are not any comparison studies about these controllers. To investigate the differences between the three types of the controllers, this paper presents a comparative study of PR, PI, and PD controllers in a photovoltaic (PV) PCS. These controllers are designed mathematically and simulated for the comparative analysis. The PI controller is designed in the rotating reference (dq) frame. The PR and PD controllers are implemented in the natural (abc) reference frame. The PCS is composed of a DC-DC boost converter and a full bridge inverter. The filter of the PCS is an LCL filter including a passive damping resistor. The parameters of PCS are 3 kW, 25 kHz switching frequency and 220 V-60 Hz grid voltage. The comparison results between these controllers for the grid-connected PCS are clearly shown. The simulation results demonstrate the detailed characteristics of each controller for the PV PCS in order to choose the controller for individual target properly.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.12-22
• /
• 1996

A numerous designs of PI controllers have been suggested to solve out trade-off between tracing and regulating problems. We constructed the PI controller system with two-degree-of-freedom that is more analytic and a better approach to a practical one. In the conventional H$_{2}$ design of optimal PI controllers, the cost function includes only the plant output terms due to the divergent problems. Since the platn input temr is not considered in PI controller design, occasionally, the plant input thends to be either very large or saturated. To solve the prior mentioned problems, we employed a mixed $H_2/H_{\infty}$ method that combines the H$_{2}$ design method to decide optimal parameters of PI controller and the $H_2/H_{\infty}$ design method to minimize the maximum amplitude of plant input. The calculation time of the H$_{infty}$ norm was considerably reduced by the simple scalar function obtained by the wiener-hopf factorization of non-scalar functions.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.109-119
• /
• 1993

To improve limitations of fuzzy PI controllers especially when applied to systems of order higher than one, we propose a fuzzy PI controller that takes out appropriate amounts of accumulated control input according to fuzzily described situations in addition to the calculation of incremental control input as in the case of conventional fuzzy PI controllers. The structure of the proposed controller was motivated by the characteristics of fuzzy PI controller that it generally gives inevitable overshoot when one tries to reduce rise time of the response especially when a system of order higher than one is under consideration. Since the undesirable characteristics of the fuzzy PI controller is caused by integrator of the controller, even though the integrator is introduced to overcome steady state error of response, we propose a controller that fuzzily clears out integrated quantities according to situation to give reduced rise time as well as small overshoots. To show the usefulness of the proposed controller, it is applied in simulations to such systems as are difficult to stabilize or difficult to get satisfactory responses by conventional fuzzy PI controllers.