• 제목/요약/키워드: PHR

검색결과 423건 처리시간 0.029초

비등흡수에 따른 에폭시 복합체의 교류 절연파괴강도의 변화 (The variations of AC dielectric breakdown strength of epoxy composites due to boiling absorption)

  • 이덕진;김경민;김탁용;손인한;신성권;김경환;김재환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.529-531
    • /
    • 1999
  • In this Paper, the variable dielectric breakdown strengths of epoxy composites were investigated at belling absorption condition in order to observe the influences of moisture in out door use. Also. in order to improve withstand voltage properties at moisture absorbtion condition, IPN(interpenetrating polymer network) method was Introduced and the Influence was investigated. As Adding filler(SiO$_2$) classified by o(phr), 50(phr) and 100[phr] to two kinds of matrix resin, six kinds of specimens were manufactured. As a result, it was confirmed that dielectric breakdown strength wer degraded with boiling time and filer content increasing. But, it was confirmed that dielectric breakdown strength degrading rate were lowered by the Improvement of adhesion strength in IPN specimens.

  • PDF

Fire Resistance Properties of Chloroprene Rubber containing Inorganic Flame Retardant

  • Sung, Il Kyung;Park, Chan Young
    • Elastomers and Composites
    • /
    • 제50권4호
    • /
    • pp.279-285
    • /
    • 2015
  • This study examined the mechanical properties and the flame retardant properties of CR rubber containing inorganic flame retardant with various contents of aluminium trihydroxide (ATH, $Al(OH)_3$). The content of aluminium trihydroxide was added in 0, 30, 50, 70 and 100 phr for T1~T5 samples. It was found that increasing the amount of addition over 30 phr resulted in decreasing the mechanical properties. On the other hand in oxygen index measurements T1 sample showed a value of 38.6%, indicating the improvement of flame retardant properties showed a value of 49.7~64.2%. In case of burn test, it was confirmed that CR rubber containing over ATH 50phr content showed performance corresponding to that of first grade fire-resistance.

비등에 따른 에폭시 복합체의 내트래킹성과 기계적강도에 관한 연구 (A Study on The Tracking Resistance and Mechanical strength of Epoxy Composites due to Boiling Absorption)

  • 김경민;김탁용;이덕진;강태오;홍진웅;김재환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.165-168
    • /
    • 2000
  • This paper presents the tracking resistance and mechanical strength due to boiling absorption of epoxy resin. The single network structure specimen(E series) formed of epoxy alone and interpenetrating polymer network(IPN) structure specimen(EM series) which epoxy resin was taken as first network and methacrylic acid resin as second network were manufactured. As adding $SiO^2$ filler classified by o[phr], 50[phr] and 100[phr] to those specimens, six kinds of specimens were manufactured and boiled in water during 2, 4, 8, 16, 32 and 64[hours]. As a result, it was confirmed that the tracking breakdown time of E series showed a abrupt decrease with boiling time increasing, but that of EM series was decreasing smoothly. Also, it was verified that the degrading rates of mechanical strength was lowerd according to improvement of adhension strength in case of EM series.

  • PDF

나노 실리카 충진함량 변화에 따른 EMNC의 특성 연구 (2) -기계적, 전기적 특성 중심으로- (Properties of EMNC According to Addition Contents Variation for Nanosilica (2) -For Mechanical, Electrical Properties)

  • 박재준
    • 한국전기전자재료학회논문지
    • /
    • 제25권11호
    • /
    • pp.886-894
    • /
    • 2012
  • In order to develop electrical insulation materials, epoxy-nanosilica-microsilica mixture composites (ENMC) was synthesized, and mechanical properties such as their tensile and flexural strength, and AC insulation breakdown strength were investigated. Properties of mechanical strength and AC insulation breakdown strength are analyzed as scale and shape parameter with respect to weibull plot. Their tensile and flexural strength, AC insulation breakdown strength were compared original epoxy or EMC to ENMC. The 4 phr nano-silica addition and the 65 wt% micron-silica mixture composite (ENMC) was found to have the highest tensile and flexural strength. In the tensile strength was improved 29%, and flexural strength was improved 60.9% higher than those of the original epoxy. In the insulation breakdown strength, ENMC_4 phr was improved 17% and ENMC_5 phr was improved 15.8% higher than those of the EMC.

Migration of Antidegradants to the Surface in NR Vulcanizates: Influence of Content of Carbon Black

  • 최성신
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권2호
    • /
    • pp.170-174
    • /
    • 1998
  • Migration properties of antidegradants to the surface in NR vulcanizates containing carbon black of 30, 50, and 70 phr were studied using the migration-generating equipment with a vacuum technique. The migration was carried out at 60, 80, and 100 ℃ for 20 h. BHT, IPPD, HPPD, and wax were used as migrants. IPPD migrates faster than the other migrants. Amounts of BHT, IPPD, and HPPD that migrated at 60 and 80 ℃ decrease as the content of carbon black in the vulcanizate increases. Migrations of antidegradants in the NR vulcanizate containing carbon black of 50 phr are faster than those containing carbon black of 30 and 70 phr at 100 ℃. Although n-C23H48 is heavier than HPPD, it migrates faster than HPPD and even faster than BHT at 100 ℃. Influencing factors of carbon black on the migrations are its porous structure and polar functional groups on the surface.

Effect of cobalt ferrite on curing and electromagnetic properties of natural rubber composites

  • Anuchit Hunyek;Chitnarong Sirisathitkul
    • Advances in materials Research
    • /
    • 제12권1호
    • /
    • pp.1-13
    • /
    • 2023
  • The combination of cobalt ferrite and natural rubber has a potential to enhance the functional properties of rubber ferrite composites available on the market. In this study, cobalt ferrite was synthesized by the sol-gel method with tapioca starch as a cheating agent and then incorporated into natural rubber using an internal mixer. The curing characteristics, magnetic hysteresis, complex permeability, and permittivity of the rubber ferrite composites were studied as a function of the loading from 0 to 25 phr. The cure time and scorch time tended to reduce with the addition of non-reinforced cobalt ferrite fillers. The remanent and saturation magnetizations were linearly proportional to the cobalt ferrite loading, consistent with the rule of mixture. On the other hand, the increase in cobalt ferrite loading from 5 to 25 phr slightly affected the coercive field and the complex permeability. Using the maximum loading of 25 phr, both real and imaginary parts of the permittivity were significantly raised and reduced with the frequency in the 10-300 MHz range.

Effects of Blowing and Nucleating Agents on the Foaming Properties of Nylon 6

  • Jung-soo Kim;Sung Yeol Kim
    • Elastomers and Composites
    • /
    • 제58권2호
    • /
    • pp.65-69
    • /
    • 2023
  • To reduce the weight of the engineering plastic Nylon 6 resin, two high-temperature foaming agents, p-toluenesulfonyl semicarbazide (PTSS) and 5-phenyltetrazole (5-PT) (0-10 phr), were added and foamed without other additives. We investigated the effects of the foaming agent type and content on the foam density (g/cm3) and percent weight reduction rate of the Nylon 6 foam, and 5-PT exhibited better foaming performance than PTSS. In the case of 5-PT, the weight reduction rate was above 36% when the blowing agent content was 1.5 phr or higher, indicating that 5-PT is an effective blowing agent for reducing the Nylon 6 foam weight. Additionally, we studied the effect of the nucleating agent Talc content (0-0.4 phr) on Nylon 6 foaming, and the nucleating agent Talc considerably reduced foaming.

디지털 헬스케어 산업구조에 대한 분석 :개인건강기록(PHR) 서비스 중심으로 (An Analysis on the Industrial Structure of the Digital Healthcare: Focusing on the PHR Service)

  • 이연경;이민정
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2022년도 제66차 하계학술대회논문집 30권2호
    • /
    • pp.675-676
    • /
    • 2022
  • 헬스케어 패러다임이 정밀, 예측, 맞춤, 예방의료 중심으로 변화하면서 개인의 건강관리에 대한 관심과 중요성이 커지고 있다. 디지털 헬스케어 산업은 4차 산업혁명 정보통신기술 발달과 함께 수요자 중심의 고부가 가치형 의료서비스 제공이 가능할 것으로 전망되고 있다. 디지털 헬스케어 산업의 한 영역인 개인건강기록(PHR) 서비스는 개인의 모든 건강기록 데이터를 기반으로 하여 예방과 관리 목적에 맞추어 맞춤형 건강관리를 가능하게 한다. 본 연구에서는 개인건강기록 서비스의 가치사슬을 정리해보고, 가치사슬 핵심요인 중심의 산업구조분석을 통해 주요 환경변화에 있어 경쟁자들과의 경쟁우위를 확보하는데 필요한 차별화 전략의 우선순위를 모색하고자 한다.

  • PDF

ABS-g-MAH를 포함한 Poly(acrylonitrile-butadiene-styrene)과 Polycarbonate 고분자 블렌드의 유변학적, 기계적, 형태학적 물성 (Rheological, Mechanical and Morphological Properties of Poly(acrylonitrile-butadiene-styrene)/Polycarbonate Blends with ABS-g-MAH)

  • 송기헌;홍존희;승유택;김연희;한미선;윤호규;김우년
    • 폴리머
    • /
    • 제31권4호
    • /
    • pp.283-288
    • /
    • 2007
  • Poly(acrylonitrile-butadiene-styrene) (ABS)/polycarbonate(PC) (70/30, wt%) 블렌드에 상용화제를 첨가하여 이축 압출기로 시편을 제조하였다. 사용된 상용화제는 ABS에 maleic anhydride(MAH)와 dicumyl peroxide(DCP)를 첨가하여 반응압출을 통하여 그래프트시킨 ABS-g-MAH이었다. ABS/PC(70/30) 블렌드에 상용화제를 5 phr 첨가한 경우 인장강도는 큰 증가는 관찰되지 않았으나, 약 52.25 MPa에서 55.03 MPa로 약간 증가하였다. ABS/PC(70/30) 블렌드의 유변학적 물성을 측정한 결과 상용화제 첨가 시 낮은 진동수 영역에서 탄성률의 증가가 관찰되었으며, 이와 같은 탄성률 증가는 손실탄성률보다 저장탄성률에서 더 잘 나타났다. 또한 ABS/PC(70/30) 블렌드에 ABS-g-MAH를 $1{\sim}10\;phr$ 첨가 시 분산상인 PC의 크기는 약 1.2에서 $1.5\;{\mu}m$로 큰 변화가 없음을 알 수 있었다. 이상의 연구 결과로서 저장탄성률 증가 및 복소점도 상승 그리고 인장강도의 증가로부터 ABS-g-MAH의 양이 5 phr일 때 ABS/PC(70/30) 블렌드에서 효과적인 상용화제로 작용함을 알 수 있었다.

NR/BR Compounds의 가황촉진제 병용에 의한 가황 특성 및 기계적 물성 연구 (Cure Characteristics and Mechanical Properties of Ternary Accelerator System in NR/BR Compounds)

  • 김일진;김욱수;이동현;배종우;변영후;김원호
    • Korean Chemical Engineering Research
    • /
    • 제47권4호
    • /
    • pp.403-409
    • /
    • 2009
  • 1906년 George Oenslager에 의해 처음으로 아닐린계 유기 가황 촉진제를 발견한 이 후 현재 많은 종류의 유기 가황 촉진제가 알려져 있으며 이들 유기 가황 촉진제를 그 특성에 맞도록 병용하면 더욱 효과적이고 이것을 2종 혹은 3종을 병용하면 또 다른 효과를 나타낸다. 최근 고무 산업의 많은 분야에서 생산성 향상 및 제조환경 개선 요구에 부응하기위하여 사출 기법이 도입되고 있으며 이를 위해서 고속 가류형 고무 컴파운드의 개발이 요구되고 있다. 따라서 적절한 가류 시간 확보를 위하여 다양한 종류의 촉진제에 대한 연구, 컴파운드의 적절한 저장 안정 기간 확보에 대한 연구, pellet 형상 제조 시 자중에 의한 autoadhesion 감소에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 NR/BR compounds에 MBTS(2,2' Dithiobisbenzothiazole), TMTM(Tetramethylthiuram Monosulfide), ZDMC(Zinc dimethyldithiocarbamate), CBS(N-Cyclohexyl benzothiazolyl-2-sulfenamide), DPG(Diphenylguanidine)를 각각 병용하여 가황 고무의 가황 특성 및 기계적 물성을 비교 분석하였다. 촉진제 병용에 따른 NR/BR compounds를 평가한 결과 MBTS 1.5 phr, TMTM 0.5 phr, DPG 0.15 phr을 사용한 경우 가장 우수한 가황 특성($t_{90}$: 235 sec, $T_{max}$: 5.77 Nm)을 나타내었으며 100, 300% 모듈러스 및 인열 강도 값이 각각 2.180, 5.656 MPa, 59.58 kgf/cm으로 가장 우수한 결과를 나타내었다.