• Animal cells and systems
• /
• v.5 no.3
• /
• pp.263-266
• /
• 2001

Metallothionein (MT) is induced in the regenerating rat liver. We have investigated expression of MT gene by RT PCR as well as specific localization of MT by immunocytochemistry in regenerating rat liver after partial hepatectomy (PH). MT mRNA level started to increase from 1 h and reached the peak at 8 h after PH. The level decreased gradually by 24 h, and became similar to that of control group. In the immunocytochemical study, in all groups treated with primary antibody, immunogold particles indicating the presence of MT were evenly distributed throughout both cytoplasm and nucleus of the rat hepatocytes. Within the nucleus, the gold particles appeared to be intensely localized in the areas of euchromatin and nucleolus. Within the cytoplasm, gold particles did not seem to adhere to mitochondria or Iysosomes, but were freely distributed. However, rough endoplasmic reticulum was the obvious compartment on which the gold particles were localized. Time course of MT immunoreactivity revealed that distribution of gold particles in hepatocytes increased gradually by 24 h, and decreased at 48 h after PH. Briefly, PH resulted in the sharpest increase in the expression of MT mRNA at 8 h and in the immunoreactivity of MT at 24 h, respectively. It is suggested that the increase of MT mRNA expression, the intensity of immunoreactivity and the specific localization of MT may be associated with the compensatory cell proliferation followed by PH.

• Clinical and Experimental Pediatrics
• /
• v.54 no.3
• /
• pp.106-110
• /
• 2011

In pediatric patients with acute lymphoblastic leukemia (ALL), the Philadelphia chromosome translocation is uncommon, with a frequency of less than 5%. However, it is classified as a high or very high risk, and only 20-30% of Philadelphia chromosome-positive (Ph+) children with ALL are cured with chemotherapy alone. Allogeneic hematopoietic stem cell transplantation from a closely matched donor cures 60% of patients in first complete remission. Recent data suggest that chemotherapy plus tyrosine kinase inhibitors (TKIs) may be the initial treatment of choice for Ph+ ALL in children. However, longer observation is required to determine whether long-term outcome with intensive imatinib and chemotherapy is indeed equivalent to that with allogeneic related or alternative donor hematopoietic stem cell transplantation (HSCT). Reports on the use of second-generation TKIs in children with Ph+ ALL are limited. A few case reports have indicated the feasibility and clinical benefit of using dasatinib as salvage therapy enabling HSCT. However, more extensive data from clinical trials are needed to determine whether the administration of second-generation TKIs in children is comparable to that in adults. Because Ph+ ALL is rare in children, the question of whether HSCT could be a dispensable part of their therapy may not be answered for some time. An international multicenter study is needed to answer the question of whether imatinib plus chemotherapy could replace sibling allogeneic HSCT in children with Ph+ ALL.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.383-388
• /
• 2009

Rates of solvolyses of diphenyl thiophosphorochloridate ($(PhO)_2$PSCl, 1) in ethanol, methanol, and aqueous binary mixtures incorporating ethanol, methanol, acetone and 2,2,2-trifluoroethanol (TFE) are reported. For four representative solvents, studies were made at several temperatures and activation parameters were determined. The 30 solvents gave a reasonably precise extended Grunwald-Winstein plot, correlation coefficient (R) of 0.989. The sensitivity values (l = 1.29 and m = 0.64) of diphenyl thiophosphorochloridate ($(PhO)_2$PSCl, 1) were similar to those obtained for diphenyl phosphorochloridate ($(PhO)_2$POCl, 2), diphenylphosphinyl chloride ($Ph_2$POCl, 3) and diphenylthiophosphinyl chloride ($Ph_2$PSCl, 4). As with the previously studied of 3~4 solvolyses, an $S_N$ pathway is proposed for the solvolyses of diphenyl thiophosphorochloridate (1). The activation parameters, ${\Delta}H^{\neq}\;(=11.6{\sim}13.9\;kcal{\cdot}mol^{-1})\;and\;{\Delta}S^{\neq}\; (=\;-32.1\;{\sim}\;-42.7\;cal{\cdot}mol^{-1}{\cdot}K^{-1})$, were determined, and they were in line with values expected for an $S_N$2 reaction. The large kinetic solvent isotope effects (KSIE, 2.44 in MeOH/MeOD and 3.46 in $H_2O/D_2$O) are also well explained by the proposed $S_N$2 mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3745-3748
• /
• 2010

Pd(II) p-tolylamide Pd(2,6-$(Ph_2PCH_2)_2C_6H_3$)(NH($C_6H_4Me$-p)) (1) was metathetically prepared by the reaction of Pd(2,6-$(Ph_2PCH_2)_2C_6H_3$)Cl with NaNH($C_6H_4Me$-p). Treatment of 1 with carbon dioxide affords the palladium(II) carbamate Pd(2,6-$(Ph_2PCH_2)_2C_6H_3$)(OC(O)NH($C_6H_4Me$-p)) (2), quantitatively. Complex 2 reacts with HX (X = Cl, OTf) to give Pd(2,6-$(Ph_2PCH_2)_2C_6H_3$)X, $NH_2$(p-Tol) and $CO_2$. Reaction of the palladium(II) carbamate with MeI produced Pd(2,6-$(Ph_2PCH_2)_2C_6H_3$)I along with generation of methyl N-tolylcarbamate MeOC(O)NH($C_6H_4Me$-p), exclusively.

• Korean journal of food and cookery science
• /
• v.4 no.2
• /
• pp.65-69
• /
• 1988

This study was carried out to find the optimum condition for production of fusarin C, Known as a mutagenic and toxic agent. Three liquid media, Czapek-kox, MYRO, GYEP and microorganism, Fusarium moniliforme F84 isolated by Bjeldanes lab. in U.C. Berkeley, were used in this experiment. Fusarin C amounts were determined upon PH and fluctuating time/temperature. The results were obtained as follows; 1. The largest amounts of fusarin C were shown in Czapek-Dox medium and the amounts were about 1/10 of fusarin C amounts in corn culture. 2. In Czapek-Dox medium, the best condition for fusarin C production was at $28^{\circ}C$ for 2 weeks culture, and in corn culture, at $28^{\circ}C$ for l week culture. 3. The best initial PH for fusarin C production was 6.5 in Czapek-Dox medium and also at the initial pH 6.3, 5.9 the fusarin C amounts produced were much higher than other initial PH.

• YAKHAK HOEJI
• /
• v.59 no.2
• /
• pp.77-84
• /
• 2015

The spring convention of the Pharmaceutical Society of Korea (PSK), composed of eight symposia and two special symposia, was held at the K Seoul Hotel on April 17th and 18th in 2014. During the convention, the board meeting of PSK officially approved the birth of Pharmacy History (PH) Division as one of 19 divisions of PSK on April 17th. In the morning of April 18th, an inaugural symposium of PH division was held at the hotel with a theme of "History of Pharmacy in Korea". In this article, the establishment of PH division, content of the 1st symposium will be described. The future vision of PH division, which will be focused on the study of modern history rather than that of old history, will be described as well. The introduction of modern pharmacy education system to Korea and various events that happened during the establishment of the system may represent issues that should be investigated with the highest priority by the PH division.

• Biodesign
• /
• v.5 no.4
• /
• pp.136-140
• /
• 2017

Lam6 is a member of sterol-specific ${\underline{l}ipid$ transfer proteins ${\underline{a}}nchored$ at ${\underline{m}ebrane$ contact sites (LAMs). Lam6 localizes to the ER-mitochondria contact sites by its PH-like domain and the C-terminal transmembrane helix. Here, we purified and crystallized the Lam6 PH-like domain from Saccharomyces cerevisiae. To aid crystallization of the Lam6 PH-like domain, T4 lysozyme was fused to the N-terminus of the Lam6 PH-like domain with a short dipeptide linker, GlySer. The fusion protein was crystallized under the condition of 0.1 M HEPES-HCl pH 7.0, 10% (w/v) PEG 8000, and 0.1 M $Na_3$ Citrate at 293K. X-ray diffraction data of the crystals were collected to $2.4{\AA}$ resolution using synchrotron radiation. The crystals belong to the orthorhombic space group $P2_12_12_1$ with unit cell parameters $a=59.5{\AA}$, $b=60.1{\AA}$, and $c=105.6{\AA}$. The asymmetric unit contains one T4L-Lam6 molecule with a solvent content of 58.7%. The initial attempt to solve the structure by molecular replacement using the T4 lysozyme structure was successful.

• Journal of Powder Materials
• /
• v.29 no.4
• /
• pp.314-319
• /
• 2022

The effect of the laser beam diameter on the microstructure and hardness of 17-4 PH stainless steel manufactured via the directed energy deposition process is investigated. The pore size and area fraction are much lower using a laser beam diameter of 1.0 mm compared with those observed using a laser beam diameter of 1.8 mm. Additionally, using a relatively larger beam diameter results in pores in the form of incomplete melting. Martensite and retained austenite are observed under both conditions. A smaller width of the weld track and overlapping area are observed in the sample fabricated with a 1.0 mm beam diameter. This difference appears to be mainly caused by the energy density based on the variation in the beam diameter. The sample prepared with a beam diameter of 1.0 mm had a higher hardness near the substrate than that prepared with a 1.8 mm beam diameter, which may be influenced by the degree of melt mixing between the 17-4 PH metal powder and carbon steel substrate.

• The Korean Journal of Physiology
• /
• v.18 no.2
• /
• pp.163-169
• /
• 1984

The effect of vanadate on the optimum pH of Na-K-ATPase was investigated. The results were as follows: 1) The optimum PH of Na-K-ATPase was shifted from PH 7.4 to 6.8 at 10 mM K by $5{\times}10^{-6}M$ vanadate. 2) The ratio of Na-K-ATPase activity at pH 6.8 and 7.4 increased with increasing vanadate concentration. 3) Inspite of the presence of $5{\times}10^{-6}M$ vanadate Na-K-ATPase activity at pH 7.4 was higher than that at pH 6.8 below 50 mM $Na^+$, and the ratio of Na-K-ATPase activity at pH 7,4 and 6.8 was higher than that of the control. 4) Na-K-ATPase activity at pH 7.4 was higher than that at pH 6.8 below 7mM $K^+$. 5) Optimum pH of Na-K-ATPase activity was shifted from pH 7.4 to 6.8 by $10^{-5}M$ vanadate at 5 mM $K^+$. 6) $K^+$-pNPPase activity increased with lowering of pH, and the degree of inhibition of $K^+$-pNPPase activity by $10^{-7}$M vanadate was decreased with lowering of pH. These results suggest that vanadate shifts the optimum pH of Na-K-ATPase activity to more acidic PH than PH 7.4. This effect may not be caused by the decrease in the inhibitory potency of vanadate itself to Na-K-ATPase by the change of medium pH, but mainly by the alteration of Na-and K-binding site, which appears in the presence of vanadate only.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.7-15
• /
• 1981

A Japanese larch has been reforested very much in Korea, but it is not used as a wood resources for paper pulp by now. So this study is carried out to utilize the larchwood for paper pulp manufacture through the Asplund pulping process. The experiment on increasing in the brightness of the pulp is made through the addition of $MgSO_4$, $ZnSO_4$, $Al_2(SO_4)_3$, and KI as a cellulose stabilizer in chip treatment with caustic soda which is followed by high-temperature defibration and conventional peroxide bleaching (5% NaOH plus 2% additive salt per wood in cold pretreatment), or in high-consistency (30%) pulp bleaching of hydrogen peroxide and peracetic acid (100% acitve oxygen per lignin) for conventional one. The results obtained are as follows: 1. The solution of 0.5% additive salts had different pH by the sort of bases that was pH 5.7 in $MgSO_4$, liquor, pH 4.9 for $ZnSO_4$, and pH 2.9 for $Al_2(SO_4)_3$, and in the precepitation of bases which ranged to pH 6-13 for $MgSO_4$, pH 5-12 for $ZnSO_4$, and pH 3-10 for $Al_2(SO_4)_3$. 2. The cellulose stabilizer affective in high-consistency peroxide bleaching was KI, $MgSO_4$, and $ZnSO_4$, but has made a little improvement in de lignification and brightness of pulp in comparison with no addition. 3. The higher alkalinity in the chip treatment has made the higher strength and brightness of larchwood Aspiund pulp instead of downing the pulp yield. And the effective compound for cellulose stabilizer in caustic soda pretreatment of chip was $ZnSO_4$, $Al_2(SO_4)_3$ and KI in order for the conventional peroxide bleaching after Asplund pulping. 4. Therefore, the more effective additives for cellulose stabilization in high-temperature defibration of larchwood suppose to be $ZnSO_4$, $Al_2(SO_4)_3$, and KI, while KI and $MgSO_4$ for peroxide bleaching.