• Journal of Life Science
• /
• v.16 no.6
• /
• pp.898-903
• /
• 2006

The genetic diversity and population structure of fifteen Potentilla discolor Bunge populations in Korea were determined using genetic variations at 19 allozyme loci. Fourteen of the 19 loci (73.7%) showed detectable polymorphism. Genetic diversity at the species level and at the population level was high ($H_{ES}\;=\;0.215$, $H_{EP}\;=\;0.196$, respectively), whereas the extent of the population divergence was relatively low $(G_{ST}\;=\;0.069)$. Total genetic diversity values $(H_T)$ varied between 0.0 and 0.656, giving an average overall polymorphic loci of 0.292. The interlocus variation of genetic diversity within populations $(H_S)$ was high (0.274). On a per locus basis, the proportion of total genetic variation due to differences among populations $(G_{ST})$ ranged from 0.010 for Pgm-2 to 0.261 for Pgd-2 with a mean of 0.069, indicating that about 6.9% of the total allozyme variation was among populations. Wide geographic ranges, perennial herbaceous nature and the persistence of multiple generations are associated with the high level of genetic variation in P. discolor. The estimate of gene flow based on $G_{ST}$ was high among Korean populations of P. discolor (Nm = 3.36).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.83-88
• /
• 1994

For the purpose of genetic stock indentification of three species of salmonid fishs and their hybrid, lactate dehydrogenase(LDH), malate dehydrogenase(MDH), isocitrate dehydrogenase(IDH), a-gylycerophosphate dehydrogenase(a-GPDH), malic enzyme(ME), 6-phospho-gluconate dehydrogenase(6-PGD), phosphoglucose isomerase(PGI) and phospho-glucomutase(PGM) from skeletal muscle, liver, heart and gill tissues in all three species were analyzed. Chum and masu salmon showed no polymorphic patterns in all isozyme loci, however rainbow trout were found to have polymorphic patterns at MDH-B, LDH and IDH loci. Especially, significant differences were found at MDH-B loci between the three species and the IDH patterns of rainbow trout were also different from the other two species. These loci therefore can be utilized as efficient genetic markers for the identification of hybrids and improve the efficiency of fish breeding. There was no difference except PGI between diploid and triploid isozyme patterns but PGI showed some potential as a marker for triploid in masu salmon.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1099-1106
• /
• 2018

In this paper, we developed and then analyzed the specifications of the frequency synthesizer which was applied to long range MFR (Multi-function Radar). These specifications were able to guarantee the functions and performance of MFR. MFR was the radar system that used phase array for electronically scanning. This frequency synthesizer made various frequency signals including to STALO (Stable Local Oscillator) for MFR. By analyzing the MFR requirements, we choose the optimal frequency synthesis method and then we got the best performance and functionality including to physical size for this system. We designed and fabricated DDS (Direct Digital Synthesizer)-driven Offset-PLL (Phase Locked Loop) synthesizer to meet the requirements which were low phase noise, fast switching time and low spurious. This synthesizer had less than -131dBc/Hz@100kHz phase noise and less than $4.1{\mu}s$ switching time, respectively.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.919-926
• /
• 2002

In this paper, new multicast scheduling algorithms are proposed for the WDM single-hop broadcast-and-select networks. The existing multicast scheduling algorithms are focused on the partitioning a multicast group into several subgroups to reduce the delay time of each receiver. These partitioning algorithms are grouping method of the receivers already tuned to the transmitter's wavelength. However, these algorithms ignore the state of receivers, which leads to increase the number of subgroups and the delay time. Therefore, 1 propose two new multicast scheduling algorithms called H_EAR and PGM that partition a multicast group to subgroups using the tunable transmitter, state information of receivers, and pseudo group concept. The performance of proposed algorithms are evaluated through the computer simulation. They show the better performance comparing with the existing multicast scheduling algorithm.

• Journal of Surface Science and Engineering
• /
• v.49 no.2
• /
• pp.159-165
• /
• 2016

The hydrogen has been recognized as a clean, nonpolluting and unlimited energy source that can solve fossil fuel depletion and environmental pollution problems at the same time. Water electrolysis has been the most attractive technology in a way to produce hydrogen because it does not emit any pollutants compared to other method such as natural gas steam reforming and coal gasification etc. In order to improve efficiency and durability of the water electrolysis, comprehensive studies for highly active and stable electrocatalysts have been performed. The platinum group metal (PGM; Pt, Ru, Pd, Rh, etc.) electrocatalysts indicated a higher activity and stability compared with other transition metals in harsh condition such as acid solution. It is necessary to develop inexpensive non-noble metal catalysts such as transition metal oxides because the PGM catalysts is expensive materials with insufficient it's reserves. The optimization of operating parameter and the components is also important factor to develop an efficient water electrolysis cell. In this study, we optimized the operating parameter and components such as the type of AEM and density of gas diffusion layer (GDL) and the temperature/concentration of the electrolyte solution for the anion exchange membrane water electrolysis cell (AEMWEC) with the transition metal oxide alloy anode and cathode electrocatalysts. The maximum current density was $345.8mA/cm^2$ with parameter and component optimization.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.96-107
• /
• 2018

Flow analysis using computational fluid dynamics was conducted to investigate the effect of the igniter flame caused by the gap between the igniter and the propellant grain in a solid rocket motor. Two propellant grain types were assumed; namely cylinder type (1 mm, 3 mm, and 5 mm gap) and the slot type. The slot type had two igniter hole locations. One was located at the small gap of the propellant grain, and the other one was located at the large gap. In the case of the cylinder type, the pressure in the igniter zone was higher with a thinner gap. Additionally, in the case of the cylinder type, the pressure difference between the igniter installed zone and the free volume was also higher as the gap became lower. The cylinder types were affected by the gap distance, but the slot types were not. Moreover, the results of the slot types were similar to the 5-mm gap case of the cylinder type.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.517-526
• /
• 2019

In the present study, unsteady flows around a projectile ejected from an aircraft platform have been numerically investigated by using a three dimensional compressible RANS flow solver based on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. Initial behavior of the projectile for varying conditions, such as roll and pitch-yaw command on the control surface of the projectile, flight Mach number, and platform pitch angle, was investigated. The ejection stability of the projectile was degraded as Mach number increases. In the transonic condition, the initial behavior of the projectile was found to be unstable as increase of platform pitch angle. By applying the command to control surfaces of the projectile, initial stability was highly enhanced. It was concluded that the proposed simulation data are useful for estimating the ejection behavior of a projectile in design phase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.568-573
• /
• 2019

Modern Radars are evolving into MFRs which can search multiple targets simultaneously and then track them. Additionally they should be able to avoid some external jamming signals. Applying to these MFRs, Antennas should be able to perform DBF including to not only real-time beam steering but also multi-beam forming simultaneously. And they can cancel the beam at the specific direction. In this paper, we describe the implementation of sub-array type antenna hardware which can be applying DBF. Also we propose the modified amplitude aperture distribution for suppressing the side lobe level and explain the sub-array receiver design with amplitude tapering. It consists in making the amplitude weighting in 2 steps. In order to compare two weighting cases, we investigate the G/T performance for the array antenna. At the conclusion, we make a comparative study for the dynamic range of every sub-array receiver and present the hardware implementation that is more advantageous for sub-array alignment and calibration in DBF.

• Korean Journal of Optics and Photonics
• /
• v.33 no.3
• /
• pp.99-105
• /
• 2022

We have evaluated the performance of an all-optical automatic gain-controlled (AGC) erbium-doped fiber amplifier (EDFA) to suppress the optical signal fluctuation induced by atmospheric turbulence in terrestrial free-space optical communication systems. In our measurements, the input power into the EDFA was set to be -30 dBm and -10 dBm to operate the amplifier in the small-signal and saturation regions, respectively. The fluctuations in the optical signal were emulated with an acousto-optic modulator driven with a sinusoidal voltage. From the measured results, we have found that an all-optical AGC EDFA could suppress the optical signal fluctuation effectively, as long as the EDFA operated in the small-signal region with a high feedback amplified spontaneous emission (ASE) power.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.1-10
• /
• 2023

This study examines the response when the shock by underwater explosion is transmitted to a vertical launch air-vehicle mounted on a ship using modeling and simulation, and is about a plan to increase method shock resistance to protect the air vehicle. In order to obtain an accurate mathematical model, a dynamic characteristic test was performed on similar equipment, and through this, the mathematical model could be supplemented. And, using the supplemented mathematical model, the air vehicle simulated the shock response by the underwater explosion specified in the BV043 standard. As a result of the first simulation, it was confirmed that air vehicle could not withstand shock, and air vehicle protection method using a ring spring type shock absorber was studied. In addition to the basic shape of abosber, it was confirmed that the ring spring absober can be used to increase the impact resistance of a shipborn vertical launch vehicle by performing simulations for each case by changing deseign varables.