• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.589-593
• /
• 2007

재생 가능한 자원인 동식물성 기름을 원료로 제조되는 수송용 연료 바이오디젤은 낮은 대기오염물질 배출과 $CO_2$ Neutral 특성으로 환경친화적인 연료로 인정을 받으며 전세계적으로 그 생산량이 급격히 증가하고 있다. 대부분의 상용화 공정은 염기촉매를 이용한 전이에스테르화 반응에 근거하고 있으며 높은 생산성을 위해 연속 공정을 채택하고 있다. 원료유 중의 유리지방산(free fatty acid, FFA)은 염기 촉매와 반응하여 지방산염(Soap)과 수분을 생성하며 반응촉매의 투입양을 증가시카고 반응 후에 글리세롤과 지방산 메틸에스테르와의 분리를 어렵게 만든다. 높은 수율과 후속공정의 부하를 줄이기 위해서는 식물성 원료유 중의 FFA는 고체 산촉매 하에서 메탄올과 에스테르화 반응시켜 전환 제거되어야 한다. 본 연구에서는 고체산 촉매인 Amberlyst-15을 충전한 4단 PBR(Packed Bed Reactor, 충전율 60%(v/v))에서 반응시간과 반응온도에 따른 대두원유의 전처리 효율을 조사하였으며 최적 전처리 조건을 도출하였다. 최적 전처리 조건에서 대두원유는 초기 산가 1.6에서 0.4-0.6으로 연속 전처리할 수 있었다. 본 연구에서는 연속 흐름 반응기인 PFR(Plug Flow Reactor)와 4단 CSTR(Continuous Stirred Tank Reactor)에서 균질계 촉매인 KOH 존재하에 대두유와 메탄올과의 전이에스테르화 반응 특성을 조사하였으며 각 연속 반응시스템에서 최적 운전 조건을 도출하였다. PFR 반응기에서 반응온도, 반응시간, 반응물 흐름방향, static mixer(SM) 개수에 따른 반응특성을 조사한 결과, PFR에서의 최적 반응조건은 하향류 흐름 방향과 3개의 SM를 설치한 조건에서 반응시간 5.8분, 반응온도 90$^{\cdot}C$, 메탄올:오일 몰비 9:1, KOH 농도 0.8%로 도출되었다. CSTR 반응기에서는 반응온도와 체류시간에 따른 반응특성을 조사하였으며 최적반응 조건으로 반응온도 80$^{\cdot}C$, 메탄올/오일 몰비 9:1, KOH 농도 0.8%, 체류시간 18.4분, 교반속도 250rpm로 조사되었다.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.90-96
• /
• 2018

기성 유동상 반응기(AFBR)의 수리학적 특성을 고찰하기 위해 "무담체 모드"와 "담체 충진 모드"의 두 가지 모드에서 추적자 실험을 수행하였다. 각 모드에서 동일한 실험조건으로 실험을 수행하여 수리학적 수치들이 유도되었고 실제 반응기의 수리학적 특성파악에 필요한 데이터를 얻어 해석하였다. 두 가지모드에서의 수리학적 해석을 위해 담체는 비 반응성이고 분산계수가 상수라는 가정으로 비 반응성 추적자의 일차원-비 정상상태 농도분포의 분산모델을 사용하였다. 실험결과 담체는 반응기 내부에서의 혼합효과를 크게 증가시켰다. 담체를 충진하지 않은 경우 충진한 경우에 비해 분산계수는 최소 1자리 수 이상 작게 나타났다. 담체가 없는 경우 실험영역(Pe⦤0.83cm/s)에서 이류흐름이 지배적 흐름이었고 반응기의 흐름형태는 마개흐름형 반응기(PFR)에 근접하였다. 이 때 분산계수는 0.83cm/s까지 겉보기유속에 비례적으로 증가하였다. 그러나 담체가 충진된 경우, 흐름형태는 마개흐름형 반응기 (PFR)과 완전혼합형 반응기(CMFR)사이에 있음을 나타내었으며 분산계수는 겉보기유속이 0.41cm/s에서 거의 최대치에 도달한 후 0.82cm/s까지 유사한 수치를 나타내었다. 본 실험조건에서 분산계수는 액체 레이놀즈수(Re) 또는 입자 레이놀즈수(Rep)에 비례하였다.

• 한국광과학회:학술대회논문집
• /
• 한국광과학회 2003년도 학술대회지
• /
• pp.47-50
• /
• 2003

• Carbon letters
• /
• 제4권2호
• /
• pp.57-63
• /
• 2003

In polymer precursor based activated carbon, the structure of starting material is likely to have profound effect on the surface properties of end product. To investigate this aspect phenolic resins of different types were prepared using phenol, mcresol and formaldehyde as reactants and $Et_3N$ and $NH_4OH$ as catalyst. Out of these resins two resol resins PFR1 and CFR1 (prepared in excess of formaldehyde using $Et_3N$ as catalyst in the basic pH range) were used as raw materials for the preparation of activated carbons by both chemical and physical activation methods. In chemical activation process both the resins gave activated carbons with high surface areas i.e. 2384 and 2895 $m^2/g$, but pore size distribution in PFR1 resin calculated from Horvath-Kawazoe method, contributes mainly in micropore range i.e. 84.1~88.7 volume percent of pores was covered by micropores. Whereas CFR1 resin when activated with KOH for 2h time, a considerable amount (32.8%) of mesopores was introduced in activated carbon prepared. Physical activation with $CO_2$ leads to the formation of activated carbon with a wide range of surface area (503~1119 $m^2/g$) with both of these resins. The maximum pore volume percentage was obtained in 3-20 ${\AA}$ region by physical activation method.

• Journal of Microbiology and Biotechnology
• /
• 제4권3호
• /
• pp.204-209
• /
• 1994

The synthesis of N-(benzyloxycarbonyl)-L-aspartyl-L-phenylalanine methylester (Z-APM), a precursor of aspartame, from N-(benzyloxycarbonyl)-L-aspartic acid (Z-Asp) and L-phenylalanine methylester hydrochlolide($L-PM\cdot HCI$) was investigated in a saturated-ethylacetate single phase system using immobilized thermolysin. Among the various supports tested, glyceryl-CPG was found to be most efficient for retaining enzyme activity. The enzyme immobilized onto glyceryl-CPG also showed the highest activity for Z-APM synthesis in saturated ethyl acetate. Z-APM conversion yield in saturated ethylacetate was half of that obtained in an ethyl acetate-buffer two-phase system under the same reaction conditions. However, as the mole ratio of $L-PM \cdot HCI$ to Z-Asp was increased to 4.0, the conversion yield reached 95 %. When continuous synthesis of Z-APM was canied out in a plug flow reactor (PFR) with 80 mM of L-PMㆍHCI and 20 mM of Z-Asp in saturated ethylacetate (pH 5.5), more than 95 % of Z-Asp was converted to Z-APM with a space velocity of 1.16 $hr^{-1} at 40^{\circ}C$. Although the operational stability in PFR was reduced rapidly, more than 80% of initial activity was maintained in CSTR even after a week of operation.

• Journal of Electrochemical Science and Technology
• /
• 제9권2호
• /
• pp.141-148
• /
• 2018

This study evaluated the performance characteristics of varied electrolyte species and amounts in a molten carbonate fuel cell (MCFC). Coin-type MCFCs were used at the condition of $650^{\circ}C$ and 1 atm. In order to measure the effects of varied electrolyte species and amounts, electrolytes of $(Li+K)_2CO_3$ and $(Li+Na)_2CO_3$ were selected and the amounts of 1.5 g, 2.0 g, 3.0 g, and 4.0 g were used. Insignificant performance differences were observed in the cell using different electrolytes, but the cell performance was sensitive to the amount of the electrolyte used. The pore-filling ratio (PFR), a ratio of pore filling in the components by the liquid carbonate electrolytes, was used to determine the optimum performance range. Consequently, 77% PFR demonstrated the optimum performance for both electrolytes. Thus, the MCFC had a permissible but narrow optimum performance range. The remaining amounts of electrolyte in the cells were determined using the weight reduction ratio (WRR) method after several hours of cell operation. The WRR used the relationship between the initial loaded amount of electrolyte and weight reduction of components in 10 wt% acetic acid. The relationships were linear and identical between the two electrolyte species.

• 대한후두음성언어의학회지
• /
• 제13권1호
• /
• pp.23-27
• /
• 2002

The purpose of the study is to examine differences in subglottic air pressure as a function of phonetic context. The phonetic contexts consisted of $/i:{p^h}i:{p^h}i:/,/{p^h}i:{p^h}i:/, and /{p^h}{p^h}/$. The aerodynamic and phonatory parameters are investigated in 20 female normal adults. All measurements are taken and analysed using Aerophone II voice function analyzer. The aerodynamic parameters are Peak Air Pressure(PAP) and Mean Air Pressure(MAP), and the phonatory parameters are Phonatory Flow Rate(PFR) Maximum SPL(MSPL), Phonatory SPL(PSPL), Phonatory Power (PP), Phonatory Efficiency(PE), and Phonatory $Resistance^*$ 10-5(PR). A one-way ANOVA revealed the following results. First, the aerodynamic parameters are not significantly different. Second, Peak Air Pressure(PAP) and Mean Air Pressure(MAP), as well as the phonatory parameters such as Phonatory Flow Rate(PFR) Maximum SPL(MSPL), Phonatory SPL(PSPL), and Phonatory Efficiency(PE) were significantly different. Therefore, it is advised that clinicians use only aerodynamic parameters but phonatory parameters when using Aerophone II.

• 대한핵의학회지
• /
• 제28권1호
• /
• pp.52-61
• /
• 1994

Background : The demand for refinement in noninvasive and quantitative assessment of left ventricular (LV) function is increasing. Purpose : To assess normal values of left ventricular functional parameters during both systole and diastole by scintigraphic method using computerized triple-head gamma camera and to evaluate correlations between these parameters. Methods : ECG gated blood pool scan with $^{99m}Tc$-Human serum albumin was performed in 94 normal Korean subjects. Ejection fraction (EF), systolic parameters [peak emptying rate (PER), average emptying rate (AER), time to peak emptying rate (TPER)], and diastolic parameters [peak filling rate (PFR), average filling rate (AFR), time to peak filling rate (TPFR)] were obtained by analysis of LV time-activity curve, the correlation of these parameters to the age and sex, and the correlation between these parameters were evaluated. Results : 1) Mean value of ejection fraction in study subjects was $59.6{\pm}5.25%$ and showed no significant correlation to age (r=-0.08) and sex but showed most pronounced correlation to PFR (r=0.46, p<0.001), PER (r=0.41, p<0.001), AFR (r=0.34, p<0.001) and AER (r=0.28, p<0.01). 2) Mean values of systolic parameters were as follows: $PER=3.22{\pm}0.50$ end-diastolic volume/sec, $AER=2.22{\pm}0.45$ end-diastolic volume/sec, $TPER=103.5{\pm}29.30$ msec. They showed no significant correlation to age and sex. 3) Mean values of diastolic parameters were as follows: $PFR=2.71{\pm}0.51$ end-diastolic volume/sec, $AFR=1.83{\pm}0.44$ end-diastolic volume/sec, $TPFR=132.1{\pm}33.45$ msec. They showed strong correlation to age (r=0.70, -0.64, 0.37, p<0.001). Conclusions : Left ventricular functional parameters in normal Korean subjects were obtained reliably by computerized scintigraphic method and may be applied to the evaluation of cardiac function in diseased patients.

• 한국환경농학회지
• /
• 제3권1호
• /
• pp.63-70
• /
• 1984

화학적(化學的) 광양측정방법(光量測定方法)을 리용(利用)하여 제주도(濟州島)의 해변(海邊)과 해발(海拔) 1,100m 고지(高地)에서 봄부터 가을사이의 태탕광선중(太湯光線中) 자외선(紫外線) 함양(含量)을 측정(測定)한 결과(結果), 여름과 초가을의 자외선(紫外線) 함풍(含豊)은 봄에 비해서 배(倍) 이상(以上)으로 나타났으며 고지대(高地帶)에서는 더 많은 자외선(紫外線) 함양(含量)이 측정(測定)되었다. 포장조건(圃場條件)에서 UV-B부분(部分)($280{\sim}320nm$) 자외선(紫外線)의 투과률(透過率)이 서로 다른 필름을 피복(被覆)하여 대두(大豆)의 생장발육(生長發育)을 조사(調査)했는데, 광선중(光線中) UV-B의 해작용(害作用)은 인정(認定)되지 않았다. 자외선(紫外線)이 식물(植物)의 광형태형성(光形態形成)에 미치는 효과(效果)를 구명(究明)하기 위하여 미형태형성(米形態形成)에 관여하는 식물(植物)의 광수용체(光受容體) 색소(色素)인 파이토크롬에 UV-B를 쪼이면서 파이토크롬의 변화(變化)를 추적(追跡)하였던바, 분자량(分子量) 124,000인 파이토크롬은 60% Pfr, 분자양(分子量)${\sim}120,000$은 50% Pfr의 광평형(光平衡) 상태(狀態)를 보였다. 광변환중(光變換中) quantum yield는 분자양(分子量) 124,000의 파이토크롬에서는 ${\phi}r=0.016$, ${\phi}fr=0.010$이었으며 분자량(分子量)${\sim}120,000$은 ${\phi}r={\phi}fr=0.012$였다. 포장상웅(圃場狀熊)에서 공시(供試)된 대두(大豆)에 UV-B의 해작용(害作用)이 관찰(觀察)되지 않은 것은, UV-B가 파이토크롬을 변환(變換)시켜 파이토크롬이 관여하는 방어적(防禦的) 형태형성(形態形成) 및 발육(發育)을 촉진(促進)시키기 때문이라고 추론(推論)되었다.

• Wind and Structures
• /
• 제9권4호
• /
• pp.297-313
• /
• 2006

The concentration of air pollution along roads is higher than the surrounding area because ventilation efficiency has decreased due to the high-density use of space along roads in recent years. In this study, ventilation efficiency around a heavily traffic road covered by an elevated highway and hemmed in along its side by buildings is evaluated using Visitation Frequency (VF, the frequency for pollutant to return to the objective domain) and Purging Flow Rate (PFR, the air flow rate for defining the local domain-averaged concentration). These are analyzed using Computational Fluid Dynamics (CFD) based on the standard $k-{\varepsilon}$ model. The VF and PFR characteristics of four objective domains are analyzed in terms of the changes in wind direction and arrangements of the fencing dividing up and down direction in the road center under the elevated highway. The resulting VFs are more than 1.0 for all cases, which means that pollutants return to the objective domain restricted by the elevated highway and side buildings. The influence of the arrangement of the buildings around the objective domain and the structure in the domain on the VF is substantial. In cases where there are no obstacles under the elevated highway, the local air exchange rate in the domain tends to be improved. Using these indices, the urban ventilation efficiencies between different urban areas can be compared easily.