• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2017

To identify applicability for packaging material of polyvinyl alcohol (PVA)/boric acid (BA) coating solution with highly-enhanced water vapor and oxygen barrier properties, the PET/PVA-BA/OPP multi-layer films were prepared through comma coating and lamination process. The oxygen and water vapor permeabilities, and tensile strength of as-prepared multi-layer films were investigated before and after pressure cooker test (PCT). Although oxygen and water vapor permeabilites, and mechanical properties of PET/PVA-BA/OPP multi-layer films was decreased after PCT, their properties were highly enhanced as increase of BA contents in PVA matrix. This is strongly related with enhanced cross-linking density in PVA-BA layer. In storage test of seasoned-laver, the PET/PVA-BA/OPP multi-layer films were comparatively effective to suppress the increase in peroxide value originating from oxidation of seasoned-laver. Comparing the commercially available PP/Al-metallized PP for seasoned-laver packaging, however, PET/PVA-BA/OPP multi-layer films did not show any advantage in water activity. This is due to higher water vapor permeation properties of as-prepared multi-layer films. Therefore, further studies are required to enhance the water vapor permeation in PET/PVA-BA/OPP multi-layer films.

• The monthly packaging world
• /
• s.352
• /
• pp.53-55
• /
• 2022

• The monthly packaging world
• /
• s.364
• /
• pp.52-55
• /
• 2023

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.924-925
• /
• 2013

최근 미세가공 및 자동측정 분야가 고성능화 되어 자동화가 많이 실현되고 있다. 이러한 자동화는 고정밀도와 동시에 제품 생산에 대한 저비용, 단기납기, 고품질의 제품 창출로 이어진다. 현재 핸드폰 시장이 급성장함에 따라 핸드폰의 생산 주기가 현저하게 짧아지고 핸드폰 조립공정에 있어서 다양한 크기에 대한 핸드폰 평판표시장치인 LCD(Liquid Crystal Display)가 존재하고 있다. 핸드폰 조립공정에 있어서 이러한 다양한 LCD 표시장치(LCD, PDP, FED등)를 보호하기 위하여 보호매체인 PE/PET 필름을 부착하여 납품하도록 하고 있으며, 핸드폰 조립공정에서 발생할 수 있는 흠집 등 기타 불량을 줄이도록 노력하고 있다. 그러나 이러한 보호필름은 현재 핸드폰 조립공정 후판부에서 평판표시장치의 유리기판의 크기에 맞게 보호필름을 절단하도록 공정이 구성되어 있다. 본 논문에서는 이러한 핸드폰 조립공정을 개선하고 자동화하기 위하여 경박단소용 평판표시장치의 얇은 유리기판에 접착된 PE/PET 필름을 핸드폰의 다양한 패턴에 맞추어 하단의 유리기판에는 결함이 없도록 하여 보호필름만을 커팅 할 수 있는 커팅시스템을 제안하고 정밀계측에 대한 실험 데이터를 제시하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.24-24
• /
• 1999

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.316-322
• /
• 2013

In this study, poly(ethylene terephthalate) (PET) was treated with fluorination and ultrasonic washing treatment for hydrophilic modification of PET film. We measured the change of surface modified PET film surface characteristics using contact angle, surface free energy, FE-SEM, AFM and XPS. After direct fluorination and ultrasonic washing treatment, the water contact angle was measured to be $10.81^{\circ}$, 85% reduction compared to the untreated PET film. Total surface free energy has been measured to be $42.25mNm^{-1}$, 650% increase compared to the untreated PET film. Also RMS roughness has been measured to be 1.965 nm, 348% increase compared to the untreated PET film. Hydrophilic functional group C-OH bond concentration has increased approximately 3 times. These results are attributed to the hydrophilic functional group and cavitation due to chemical etching. From this result, it was suggested that the fluorination-ultrasonic washing treatment method could be useful to make PET film surface hydrophilic.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.111-118
• /
• 2023

In this study, the feasibility of laser patterning on the surface of food packaging polymer film was confirmed, and the surface patterning process conditions of femtosecond laser were established. In addition, it was proved that the surface properties of the film can be changed and controlled through the fabrication of various patterned films on the surface of food packaging films such as HDPE, PP, and PET. Various patterned surfaces, including large-scale circular patterns induced by a single femtosecond laser pulse, roughness patterns achieved by overlapping single pulses by 30%, straight line patterns, roughness patterns obtained by overlapping straight line patterns, and grid patterns formed by intersecting straight line patterns were fabricated. The characteristics of the patterned HDPE, PP, and PET films, based on the surface pattern structure and size, were analyzed using SEM, AFM, and contact angle measurements. Compared to the surface of each control film without femtosecond laser patterning, the contact angles of the surfaces of large-area circular patterning HDPE and PP films, large-area roughness patterning HDPE and PP films by overlapping 30% of single pulses, and large-area roughness patterning PET film by overlapping rectilinear patterning were in the range of 27.1-37.5 degree. This indicated that the HDPE, PP, and PET films became more hydrophilic after patterning. On the other hand, the HDPE film patterned with a large-scale grid pattern exhibited a contact angle of 120.4 degree, indicating that the HDPE film became more hydrophobic after patterning. Therefore, films that have been changed to hydrophilic surfaces through patterning can be used in anti-fouling applications where proteins, cells, viruses, and other food materials do not adhere or are easily detached. In addition, if a superhydrophobic surface of 150 degrees or more is fabricated through more precise lattice patterning in the future, it will be possible to use it for superhydrophobic surface applications such as self-cleaning.

• The monthly packaging world
• /
• s.268
• /
• pp.56-59
• /
• 2015

• The monthly packaging world
• /
• s.292
• /
• pp.60-63
• /
• 2017

• The monthly packaging world
• /
• s.208
• /
• pp.48-51
• /
• 2010