• Current Photovoltaic Research
• /
• v.9 no.4
• /
• pp.123-127
• /
• 2021

This study was on electrode design for the realization of a solar cell that combines electrode formation and module integration process to overcome printing limitations. We used the passivated emitter rear contact (PERC) solar cell. Wafer size was 156.75 mm ×156.75 mm. The fabricated cell results showed that the open-circuit voltage of 649 mV, short-circuit current density of 36.15 mA/cm², fill factor of 68.5%, and efficiency of 16.06% with electrode conditions the 24BBs with the width 190 ㎛ and 90FBs with the width 45 ㎛. For improving efficiency, the characteristics of the solar cell were checked according to the change in the number of BBs and FBs and the change in line fine width. It is confirmed that the efficiency of the solar cell will be improved by increasing the number of FBs from 90 to 120, and increasing the line width of the FBs by about 10 ㎛ compared to the manufacturing solar cells.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.155-161
• /
• 2003

This paper presents experimental and analytical results of glass fiber-reinforced concrete (GFRC) and polypropylene fiber-reinforced concrete (PERC) to investigate the relationship between tensile strength and compressive strength based on the split cylinder test (ASTM C496) and compressive strength test (ASTM C39). Experimental studies were performed on cylinder specimens having 150 mm in diameter an 300 mm in height with two different fiber contents (1.0 and 1.5％ by volume fraction) at ages of 7, 28 and 90 days. A total of 90 cylinder specimens were tested including specimens made of the plain concrete. The experimental data have been used to obtain the relationship between tensile strength and compressive strength. A representative equation is proposed for the relationship between tensile strength and compressive strength of fiber-reinforced concrete (FRC) including glass and polypropylene fibers. There is a good agreement between the average experimental results and those calculated values from the proposed equation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3D
• /
• pp.231-237
• /
• 2012

The interrelation of integrity degree and country competitive power was known as high. But, according to the CPI announcement of Transparency International, the domestic Corruption Perceptions Index ranked 5 points, as being corrupt. It was investigated that the corruption level of Korea was getting worse most in the construction sector. In this way, it is emergent and inevitable to improve the transparency in the construction industry, accounting for 25-54% of the total corruption cases in our society. Transparency International has opened to the public the source data, utilized in the CPI measures in 2010. In the case of Korea, the 9 data of 6 organizations were utilized. According to the PERC, the corruption level of the private sector in Korea has been estimated as the worst among the 16 countries. In this context, this paper analyses the corruption level of Korea by utilizing the source data of the Transparency International CPI. And it aims to comprehend structural problems in the construction industry and to suggest implicative countermeasures through out the anti-corruption activities in the world. It propose finally an improvement of the structural causes in the construction industry, a promotion of effective punishment against corrupt practices, a reinforcement of the transparency management in the construction sector, etc.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.203-207
• /
• 2013

P-type Si wafers were dipped in HF solution. The minority carrier lifetime (lifetime) increased after HF treatment due to the hydrogen termination effect. To investigate the film passivation effect, PECVD was used to deposit $SiN_x$ on both HF-treated and untreated wafers. $SiN_x$ generally helped to improve the lifetime. A thermal process at $850^{\circ}C$ reduced the lifetime of all wafers because of the dehydrogenation at high temperature. However, the HF-treated wafers showed better lifetime than untreated wafers. PERCs both passivated and not passivated by HF treatment were fabricated on the rear side, and their characteristics were measured. The short-circuit current density and the open-circuit voltage were improved due to the effectively increased lifetime by HF treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.687-687
• /
• 2013

In rearpoint contact solar cell and the PERC (passivated emitter rear contact) type cell, surfaces were passivated by SiO2 or Al2O3 to increase solar cell efficiency. Therefore, we have investigated the effect of surface passivation for crystalline silicon solarcell using mass-production atomic layer deposited (ALD) Al2O3. The patttern which consists of cylinders with 100um diameter and 5um height was formed by PR patterning on Si (100) substrate and then Al2O3 of about 10nm and 20nm thickness was deposited by ALD. The pattern in 10 nm Al2O3 film was removed by dipping in aceton solution for about 10 min but the pattern in 20 nm Al2O3 film was not. The influences of process temperature and heat treatment were investigated using microwave photoconductance decay (PCD) and Quasi-Steady-State photoconductance (QSSPC). The solar cell process used in this work combines the advantage of using the applicability of a selective deposition associated with a ALD passivation and the use of low-cost screen print for the contacts formation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.364.1-364.1
• /
• 2014

고효율 태양전지로 가기 위해서는 태양전지의 후면 패시베이션은 중요한 역할을 한다. 후면 패시베이션 막으로 사용되는 $Al_2O_3$ 막은 $Al_2O_3/Si$ 계면에서 높은 화학적 패시베이션과 Negative Fixed Charge를 가지고 있어 적합한 Barrier막으로 여겨진다. 하지만 이후에 전면 Metal paste의 소성 공정에 의해 $800^{\circ}C$이상 온도를 올려주게 됨에 따라 $Al_2O_3$ 막 내부에 결합되어 있던 수소들이 방출되어 blister가 생성되고 막 질은 떨어지게 된다. 우리는 blister가 생성되는 것을 방지하기 위한 방법으로 PECVD 장비로 SiNx를 증착하는 공정 중에 $N_2O$ 가스를 첨가하여 SiON 막을 증착하였다. SiON막은 $N_2O$가스량을 조절하여 막의 특성을 변화시키고 변화에 따라 소성시 막에 미치는 영향에 대하여 조사하였다. 공정을 위해 $156{\times}156mm2$, $200{\mu}m$, $0.5-3.0{\Omega}{\cdot}cm$ and p-type 단결정 실리콘 웨이퍼를 사용하였고, $Al_2O_3$ 막을 올리기 전에 RCA Cleaning 실행하였다. ALD 장비를 통해 $Al_2O_3$ 막을 10nm 증착하였고 RF-PECVD 장비로 SiNx막과 SiON막을 80nm 증착하였다. 소성로에서 $850^{\circ}C$ ($680^{\circ}C$) 5초동안 소성하고 QSSPC를 통해 유효 반송자 수명을 알아보았다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.16-22
• /
• 2023

In a solar cell, degradation refers to the decrease in performance parameters caused by defects originated due to various causes. During the fabrication process of solar cells, degradation is generally related to the processes such as passivation or firing. There exist sources of many types of degradation; however, the exact cause of Light and elevated Temperature Induced Degradation (LeTID) is yet to be determined. It is reported that the degradation and the regeneration occur due to the recombination of hydrogen and an arbitrary substance. In this paper, we report the deposition of Al₂O₃ and SiN_X on silicon wafers used in the Passivated Emitter and Rear Contact (PERC) solar structure and its degradation pattern. A higher degradation rate was observed in the sample with single layer of Al₂O₃ only, which indicates that the degradation is affected by the presence or the absence of a passivation thin film. In order to alleviate the degradation, optimization of different steps should be carried out in consideration of degradation in the solar cell fabrication process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.421.2-421.2
• /
• 2016

고효율 태양전지에서 후면 반사 방지막은 장파장대(900nm~1200nm) 빛의 내부 반사를 증가시켜 광흡수도를 개선한다. 태양전지 후면에 박형 절연층 구조를 구성함으로써 특정 파장에서 높은 반사도를 얻을 수 있는 Bragg mirror 구조를 이론적으로 계산할 수 있다. Bragg mirror 구조를 이용하여 태양전지의 후면 반사층(Rear reflector layer)을 형성함으로써 태양전지 내부의 광흡수도를 개선할 수 있다. 후면 반사 방지막(Rear anti-reflection coating)으로 사용되는 Al2O3와 SiOxNy 또는 이러한 두 가지 물질의 겹층 구조를 구성하여 장파장대 빛의 반사도 차이에 의한 광흡수도 개선 정도를 광학 시뮬레이션을 통해 계산하였다. 광학 시뮬레이션은 TCAD를 이용하였으며 두 가지 겹층 구조에서 각 반사 방지막의 두께에 따른 단락 전류(Jsc)의 개선 정도, 후면 반사층 두께의 최적화 조건을 계산하였다. 후면 반사방지막을 제외한 기본적인 태양전지 구조는 n-type PERC 구조를 사용하였으며, 후면 반사방지막만의 광학적 특성을 살펴보기 위해 전극은 광학적으로 투명하다고 가정하였다. 반사방지막 두께의 범위는 Al2O3(5-30nm), SiNx(150-300nm), SiOxNy(150-300nm)에서 수행하였으며, 각각 1nm, 2nm 간격으로 진행하였다. Al2O3/SiOxNy 구조에서는 단락 전류가 32.45-32.87mA/cm2 값을 가진다. Al2O3/SiNx 구조에서는 단락 전류가 32.59-32.87mA/cm2 값을 가진다. 결론적으로, 후면 반사방지막의 겹층 구조를 통해 광흡수도를 증가 시킬 수 있으며, TCAD 시뮬레이션을 통하여 입사되는 태양광 스펙트럼에 최적화된 구조를 설계할 수 있다.

• Current Photovoltaic Research
• /
• v.4 no.4
• /
• pp.145-149
• /
• 2016

Characteristic of aluminum-silicon alloy paste which is applied on the rear side of PERC cell was investigated. The paste was made by aluminum-silicon alloy with eutectic composition to avoid the formation of void which is responsible for the degradation of the open-circuit voltage. Also, the glass frit component of the paste was changed to improve the adhesion of aluminum-silicon paste. We observed the formation of void and local back surface field between aluminum electrode and silicon base by SEM. The light IV, quantum efficiency and reflectance of the solar cells were characterized and compared for each paste.

• The Korean Journal of Pain
• /
• v.24 no.1
• /
• pp.36-43
• /
• 2011

Background: Nucleoplasty is a minimally invasive spinal surgery using a $Coblation^{(R)}$ technique that creates small voids within the disc. The purpose of this study was to evaluate the efficacy of cervical nucleoplasty in patients with cervical disc disorder. Methods: Between March 2008 and December 2009, 22 patients with cervical disc disorders were treated with cervical nucleoplasty after failed conservative treatment. All procedures were performed under local anesthesia, and fluoroscopic guidance and voids were created in the disc with the $Perc^{TM}$ DC Spine $Wand^{TM}$. Clinical outcomes were evaluated by the Modified Macnab criteria and VAS score at preprocedure, postprocedure 1 month, and 6 months. Results: Six patients had one, eight patients had two and eight patients had three discs treated; a total of 46 procedures was performed. Mean VAS reduced from 9.3 at preprocedure to 3.7 at postprocedure 1 month and to 3.4 at postprocedure 6 months. There was no significant complication related to the procedure within the first month. Outcomes were good or excellent in 17/22 (77.3%) cases. Postprocedure magnetic resonance imaging was acquired in two patients after two months showing morphologic evidence of volume reduction of protruded disc material in one patient but not in the other. Conclusions: Percutaneous decompression with a nucleoplasty using a $Coblation^{(R)}$ technique in the treatment of cervical disc disorder is a safe, minimally-invasive and less uncomfortable procedure, with an excellent short-term clinical outcome.