• Macromolecular Research
• /
• 제10권6호
• /
• pp.325-331
• /
• 2002

Phase behavior of a PEO-PPO-PEO (Pluronic P103) triblock copolymer in water is investigated using small-angle neutron scattering (SANS), small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and rheology. Pluronic P103 shows apparent two gel states in different temperature regions. The first sol-to-gel transition at a lower temperature (i.e., the hard gel I state) turns out to be the hexagonal microphase as evidenced by the combined SANS and SAXS and the frequency dependence of both G′ and G" in rheology. In contrast to the hard gel I, the second sol-to-gel transition (i. e., the hard gel II state) at a higher temperature represents the block copolymer micelles in somewhat disordered state rather than the ordered state seen in the hard gel I. Moreover, turbidity change depending only on the temperature with four distinct regions is observed and the large aggregates with size larger than 5,000 nm are detected with DLS in the turbid solution region. Based upon the present study, two different gelation mechanisms for aqueous PEO-PPO-PEO triblock copolymer solutions are proposed.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2002년도 춘계 학술발표회 논문집
• /
• pp.61-64
• /
• 2002

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.791-797
• /
• 2017

본 연구에서는 Poly (dimethylsiloxane) (PDMS)의 높은 소수성과 생체분자들의 비특이적 흡착 문제를 해결하기 위해 PEO-PPO-PEO 블록 공중합체의 포매(embeddeing) 방식을 이용하여 손쉬운 표면 개질 및 이의 최적화 조건을 조사하였다. 친수성 표면 개질의 특성은 PDMS 내에 포매된 블록 공중합체의 농도, 수침(water-soaking), 및 소수성 표면으로 회복 시간 등의 영향을 평가하였다. 개질된 PDMS 표면은 알부민 단백질(2 mg/ml)까지 단백질의 비특이적 결합 방지 특성을 보였으며, 또한 O/W (Oil-in-Water) 에멀젼을 쉽게 형성할 수 있었다.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.969-975
• /
• 2009

This article describes the topical delivery and localization of budesonide through the hairless mouse skin. Two poly(ethylene oxide)-block-poly($\varepsilon$-caprolactone)-block-poly(ethylene oxide) (PEO-PCL-PEO) triblock copolymers (T 222 and T 252) having different CL:EO ratios were added in the preparation of budesonide particles stabilized with poly(vinyl alcohol) (PVA) and Tween 80 under ultrasonication. For comparison, a commercial PEO-PPO-PEO triblock copolymer (F68) was studied under the same condition. To demonstrate the effects of the triblock copolymer, the particle size of budesonide emulsion, entrapment efficiency, and in vitro release were measured and compared. The budesonide particles stabilized by the triblock copolymers had a diameter of ca. 350 nm with entrapment efficiencies of 66-76%. The In vitro release profiles of all samples showed an initial burst followed by sustained release. The skin penetration and permeation of budesonide were analyzed by using a Frantz diffusion cell. T 222 and T 252 exhibited higher total permeation amounts, but lower budesonide penetration amounts, than F68. The results suggest that the partitioning of budesonide in each skin layer can be adjusted in order to avoid skin thinning and negative immune response arising from the penetration of budesonide in blood vessels.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.49-49
• /
• 2002

A strategy for the synthesis of more stable and large periodic mesoporous organo-silica materials has been developed for the 2D hexagonal mesoporous organosilica by the core-shell approach using nonionic PEO-PLGA-PEO triblock copolymer templates. The BET surface area of the solvent-extracted hexagonal mesoporous organosilica is estimated to be 1,016 ㎡/g and the pore volume, pore diameter, and wall thickness are 1.447 ㎤/g, 65 Å, and 43 Å, respectively. More hydrophobic PLGA block than the PPO block used for templates of mesoporous silica proves to be quite effective in confining the organosilicates within the PEO phase. Reaction temperature and acid concentration of an initial solution as well as the chemical nature of the bloc k copolymer templates also demonstrate to be important experimental parameters for ordered organosilica mesophase. Moreover, the mesoporous organosilicas prepared with the PEO-PLGA-PEO block templates maintain their structural integrity for up to 25 days in boiling water at 100℃. The mesoporous materials with large pores and high hydrothermal stability prepared in this study has a potential for many applications.

• 접착 및 계면
• /
• 제17권4호
• /
• pp.141-148
• /
• 2016

본 연구에서는 트리블럭 공중합체($PEO_{20}PPO_{70}PEO_{20}$, P123)를 주형으로 사용하고 테트라에틸오르소실리케이트(Tetraethyl orthosilicate, TEOS)를 실리카원으로 사용하여 산 조건 하에서 자기조립 과정을 거친 후 메조포러스 실리카(SBA-15)를 합성하였다. SBA-15는 높은 표면적($704m^2g^{-1}$), 균일한 나노세공(8.4 nm) 그리고 잘 배열된 육방체 구조를 가진다. 스피로피란(Spiropyran) 기가 개질된 SBA-15 (Spiropyran-SBA-15)는 3-(트리에톡시실릴)프로필 이소시아네이트(TESPI)와1-(2-하이드록시에틸)-3,3-이메틸인돌리노-6'-니트로벤조프릴로스피렌(HDINS)을 이용하여 SBA-15에 후처리하여 합성하였다. Spiropyran-SBA-15는 개질 후 나노세공 구조의 손상없이 잘 배열된 육방체 구조를 가졌다. 그리고 표면적과 세공 크기는 각각 $651m^2g^{-1}$와 8.0 nm이었다. 그리고 다양한 화학 기체(EtOH, THF, $CHCl_3$, Acetone, HCl)를 이용하여 Spiropyran-SBA-15의 광화학적 특성을 연구하였다. 유기분자 기체들(EtOH, THF, $CHCl_3$, Acetone)에 대한 광 형광 스펙트라의 주요 발광 피크는 603.4 nm부터 592.1 nm까지 blue shift하였다. 피크 세기는 0.8부터 0.3까지 감소하였다. Spiropyran-SBA-15시료를 HCl 기체에 노출한 후 측정한 광 형광 스펙트럼은 현저한 blue shift를 보여주었다. 광 형광 스펙트럼은 592.1 nm까지 이동하였다. 또한, 광 형광 스펙트럼의 정규화된 피크 세기는 0.1까지 감소하였다.

• Journal of Pharmaceutical Investigation
• /
• 제31권1호
• /
• pp.1-5
• /
• 2001

The aggregation behavior of nystatin (NYS) in the presence of pluronic F127, triblock copolymer of poly (ethylene oxide) (PEO) and poly (propylene oxide) (PPO), was measured and correlated with hemolytic activity. Antifungal activity was also studied using Saccharomyces cerevisiae as a model strain. The critical aggregation concentrations (CAC) of the drug were 50.1, 108.0, 134.2, 154.3, and $217.9\;{\mu}M$ at 0.1%, 0.5%, 1.0%, 1.5%, and 2.0% pluronic F127 solution, respectively. The levels of NYS required to start lysis of erythrocytes were about 80, 100, 125, 150, and $200\;{\mu}M$ at 0.1%, 0.5%, 1.0%, 1.5%, and 2.0% pluronic F127 solution, respectively. It was $50\;{\mu}M$ in the absence of the polymer. Minimal inhibitory concentration (MIC) and minimal fungicidal concentration (MFC) of NYS-pluronic F127 lyophilizate were same at $3\;{\mu}g/ml$, while MIC and MFC of pure NYS are $3\;{\mu}g/ml$ and $12\;{\mu}g/ml$, respectively. By modulating the aggregation behavior of NYS, pluronic F127 was able to reduce the toxicity of the drug without compromising the MIC and MFC.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2342-2348
• /
• 2014

Poly(lactic-co-glycolic acid) (PLGA) were grafted to both ends of Pluronic$^{(R)}$ F68 ($(EO)_{75}(PO)_{30}(EO)_{75}$) triblock copolymer to produce poly{(lactic acid)$_m$-co-(glycolic acid)$_n$}-b-poly(ethylene oxide)$_{75}$-b-poly(propylene oxide)$_{30}$-b-poly(ethylene oxide)$_{75}$-b-poly{(lactic acid)$_m$-co-(glycolic acid)$_n$} (PLGA-F68-PLGA) pentablock copolymers. Molecular weights of PLGA blocks were controlled and five kinds of pentablock copolymers with different PLGA block lengths were synthesized using in-situ ring-opening polymerization of D,L-lactide and glycolide with tin(II) 2-ethylhexanoate ($Sn(Oct)_2$) catalyst. PLGA-F68-PLGA pentablock copolymers were characterized by $^1H$- and $^{13}C$-NMR, GPC, and TGA. The numbers (2m, 2n) of repeating units for lactic acid and glycolic acid inside PLGA segments were obtained as (48, 17), (90, 23), (125, 40), (180, 59), and (246, 64), with $^1H$-NMR measurement. From NMR data, the resultant molecular weights were determined in the range of 12,700-29,700, which were similar to those obtained from GPC. Polydispersity index was increased in the range of 1.32-1.91 as the content of PLGA blocks increased. TG and DTG thermograms showed discrete degradation traces for PLGA and F68 blocks, which indicate the weight fractions of PLGA blocks in pentablock copolymers can be calculated by TG profile and it is possible to remove PLGA block selectively. Hydrodynamic radius and radius of gyration of pentablock copolymer micelle were obtained in the range of 46-68 nm and 31-49 nm, respectively, in very dilute (i.e. 0.005 wt %) aqueous solution of THF:$H_2O$ = 10:90 by volume at $25^{\circ}C$.