• 한국환경보건학회지
• /
• 제26권2호
• /
• pp.91-96
• /
• 2000

We investigated characters of transdermal therapeutic system(TTS) and the skin permeability of that with applying drug delivery system(DDS). Natural gums were selected as material of TTS. The permeation of natural gums ointment containing drug in rat skin using diffusion cell model. Permeation properties of materials were investigated for water soluble drug such as riboflavin in vitro. We used glycerin, PEG 600 and oleic acid as enhancers. Since dermis has more hydration than the stratum corneum, skin permeation rate at steady state was highly influenced when glycerin was used in riboflavin. The permeation rate of content enhancer and drug was found to be faster than that of content riboflavin only. These results showed that skin permeation rate of drug across the composite was mainly dependent on the property of ointment base and drug. All the gum ointment tested showed good safety. Proper selection of the materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.89-95
• /
• 2012

Spherical mesoporous silica particles, of which main pore diameter was 3.8 nm, were successfully prepared by spray pyrolysis from aqueous silicic acid. The effect of precursor concentration, reaction temperature, and the addition of urea and PEG on the particle diameter and pore properties such as pore diameter, total pore volume, and specific surface area were investigated by using FE-SEM, particle size analyzer, and nitrogen absorption-desorption analysis. With an increase of the precursor concentration from 0.2 M to 0.7 M, the average particle diameter, total pore volume, and specific surface area of the porous silica particles increased from 0.56 to $0.96\;{\mu}m$, 0.434 to $0.486\;cm^3/g$, 467.8 to $610.4\;m^2/g$, respectively. Within the temperature range $(600\;^{\circ}C{\sim}800\;^{\circ}C)$, there was no significant difference in the pore diameter, total pore volume, and specific surface area. In addition, the addition of urea as an expansion aid led to slight increases in particle diameter, pore diameter, and specific surface area. However, when the polyethylene glycol (PEG) as an organic template was used, the total pore volume of porous particles increased dramatically.

• 공업화학
• /
• 제20권2호
• /
• pp.172-176
• /
• 2009

Solder resist ink와 회로표면과의 밀착력 향상을 위해 사용되는 soft etching 제의 기본 조성으로 과산화수소와 황산을 선정하고 inhibitor, 계면활성제, 안정제를 첨가하여 에칭 속도 $0.7{\sim}1{\mu}m/min$, 표면조도(Ra)값 $0.5{\sim}0.6{\mu}m$을 만족시키는 soft etching 제 개발을 위한 연구를 하였다. Inhibitor로는 butyl amine, cyclohexyl amine, 5-aminotetrazole (5-Azol)을 첨가하였으며 계면활성제로는 polyethylene glycol (PEG), polyethylene imine (PEI), piperidine을 안정제로는 butyl alcohol, isopropanol, 인산을 첨가하여 각각의 첨가제가 에칭 속도 및 표면조도에 미치는 영향을 비교 분석하였다. 본 연구 결과 과산화수소 3% 황산 4%에 5-Azol 500 ppm, PEI 600 ppm, 인산 10 ppm 첨가 시 $0.7~1{\mu}m/min$을 만족시키는 에칭속도와 가장 좋은 표면조도를 갖는 것을 확인하였으며 solder test 결과 solder resist ink의 들뜸 현상이 발생하지 않는 것을 확인하였다.

• 한국응용과학기술학회지
• /
• 제17권1호
• /
• pp.43-48
• /
• 2000

Drug delivery system(DDS) applied to various fields, such as medicine, cosmetics, agriculture and necessities of life. Among these application fields, DDS is often used as the method of drug dosage into the epidermic skin. We investigated characters of transdermal therapeutic system(TTS) and the skin permeability of that with applying DDS. Chitosan was selected as material of TTS. We investigated the permeation of chitosan ointment containing drug in rat skin using horizontal membrane cell model. Permeation properties of materials were investigated for water-soluble drug such as riboflavin in vitro. We used glycerin, PEG 600 and oleic acid as enhancers. Since dermis has more content water(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when glycerin was used in water-soluble drug. The permeation rate of content enhancer and drug was found to be faster than that of content water-soluble drug only. These results showed that skin permeation rate of drug across the composite was manly dependent on the property of ointment base and drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.351-363
• /
• 2015

To increase the surface hydrophilicity of PVDF membranes, in this paper, an electric enhancing method was adopted to treat PVDF nascent membranes during the phase inversion process. It was found that when PEG 600 was taken as the additive, the surface water contact angle of the PVDF membrane treated under 2 kV electric field was decreased from $84.0^{\circ}$ to $65.7^{\circ}$. The reason for the surface elements change of the PVDF membranes prepared under the electric field was analyzed in detail with the dielectric parameters of the polymer dope solutions. Results from BSA adsorption experiment showed that the antifouling ability of the external electric field-treated membranes was distinctly enhanced when compared with that of the untreated membranes. The amount of BSA adsorbed by the treated membranes was lower by 38-43%. Compared with the common chemical reaction methods to synthesize hydrophilic additives or membrane materials, the electric field-assisted processing method did not involve any additional chemical synthesis process and it was capable of realizing better hydrophilicity.

• 치과방사선
• /
• 제23권2호
• /
• pp.303-314
• /
• 1993

The purpose of this study was to find out the prevalence of dental anomalies in 600 normal persons (male:363, female:237) at age 14 to 39 years, through history taking, oral examination, and radiographic observations of subjects. The obtained results were as follows: 1. The prevalences of individual dental anomalies were as follows; Congenitally missing teeth 7%; supernumerary teeth 1.33%; ectopic eruption; 8.50%, transposition;0.33% rotation; 23.67%, microdontia;11.16%(peg lateralis;5.33%, third molar;5.83%), prolonged retention of deciduous teeth;1.33%, crowding 49.83%, and spacing;15.17%. 2. Alterations in numbers of teeth : The most frequently missing teeth were mandibular lateral incisors, followed by mandibular second premolars and maxillary second premolars. In numbers of congenitally missing teeth per person, 52.38% had one missing tooth and 30.95% had two missing teeth. In supernumerary teeth, there was higher rate in male than in female. Most supernumerary teeth were mesiodens of median area in maxilla and the eruption pattern of that teeth generally was unerupted state. 3. In transposition, exchange of position of teeth involved the canine and first premolar. 4. Congenital missing rate of permanent successors in prolonged retention of deciduous teeth was 69.23%. 5. Crowing and spacing had respectively higher rate in mandible and in maxilla.

• The Korean Journal of Physiology and Pharmacology
• /
• 제3권2호
• /
• pp.199-205
• /
• 1999

Vibrio vulnificus cytolysin caused platelet cytolysis and increased intracellular calcium concentration $([Ca^{2+}]_i)$ of rat platelets in a concentration-dependent manner. In the presence of V. vulnificus cytolysin (3 HU/ml), lactate dehydrogenase (LDH) activity was increased from $1.3{\pm}0.4%$ of control to $64.3{\pm}3.4%$ in platelet suspension buffer. In $Ca^{2+}-free$ platelet suspension buffer, however, V. vulnificus cytolysin did not induce $[Ca^{2+}]_i$ increase and LDH release. Addition of EGTA (2 mM) to suspension buffer after the initial $Ca^{2+}$ influx reversed $[Ca^{2+}]_i$ to the control level. However, a $Ca^{2+}$ channel blocker verapamil $(20\;{\mu}M)$ or mefenamic acid $(20\;{\mu}M)$ did not inhibit V. vulnificus cytolysin-induced $[Ca^{2+}]_i$ increase and LDH release. Divalent cations such as $Co^{2+},\;Cd^{2+}\;or\;Mn^{2+}$ (2 mM each) also did not alter V. vulnificus cytolysin-induced $[Ca^{2+}]_i$ increase and LDH release. V. vulnificus cytolysin (3 HU/ml)-induced calcium influx was completely blocked by lanthanum (2 mM). Lanthanum (2 mM) also completely blocked V. vulnificus cytolysin (3 HU/ml)-induced LDH release. Osmotic protectants such as, raffinose, sucrose or PEG600 (50 mM each) did not inhibit the lytic activity of V. vulnificus cytolysin. In conclusion, lanthanum sensitive $Ca^{2+}$ influx plays a significant role in Vibrio vulnificus cytolysin-induced platelet cytolysis and thrombocytopenia in V. vulnificus infection.

• 한국작물학회지
• /
• 제37권2호
• /
• pp.134-140
• /
• 1992

당근종자의 발아율의 낮음과 발아지정의 문제점을 해결하기 위해서 Danver 126품종을 공시하여 여러가지 prime처리와 density separation 방법을 이용한 결과 다음과 같은 효과를 얻었다. 1. 여러가지 prime처리중 SMP처리(수분함량 90%, 6일간처리)에서 배의 생장이 아주 양호하였고 발아속도 및 발아율이 가장 좋았으며 종자에 피해도 없었다. 2. 무기염처리(0.2M KNO$_3$＋0.1M $K_2$HPO$_4$)에 서는 배의 생장은 좋았으나 염에 의해 종자가 피해를 입었다. 3. SMP처리(수분함량 90%, 6일간)된 종자를 density separation한 결과 종자의 비중이 낮을수록 배의 생장이 컸으며 발아율 및 발아속도가 빨랐다.

• 대한소아치과학회지
• /
• 제30권4호
• /
• pp.600-604
• /
• 2003

치아 매복은 구강점막이나 악골내에서 치아의 맹출이 중지된 상태를 의미하며, 제 3대구치와 상악 견치에서 호발한다. 상악 견치의 매복은 주로 측절치가 상실되거나 왜소한 경우와 연관성이 높지만 치배의 위치 이상과 같이 유전적인 요소와도 관련될 수 있다. 매복치는 심미적, 기능적으로 여러 가지 문제점을 야기하므로 조기에 진단하여 치료하는 것이 중요하며, 매복치의 상태에 따라서 치료 방법을 적절하게 선택하여야 한다. 본 증례는 11세 여아에서 구개측으로 수평 매복된 상악 우측 견치의 치료를 보고한 것으로, 매복치는 외과적 수술을 동반한 교정적 견인 방법을 사용하여 기능적, 심미적으로 회복되었다. 견인 치료는 매복 견치의 맹출 공간을 확보하면서 이루어졌으며, 치료 종료 후 매복 견치는 치근 흡수와 같은 합병증 없이 적절한 부착치은을 확보하여 양호하게 위치되었다.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.592-600
• /
• 2012

Conventional methods for preparing ceramic bodies, such as cold isostatic pressing, gypsum-mold slip casting, and filter pressing are not completely suitable for fabricating large and thick ceramic plates owing to disadvantages of these processes, such as the high cost of the equipment, the formation of density gradients, and differential shrinkage during drying. These problems can be avoided by employing a pressure-vacuum hybrid slip casting approach that considers not only by the compression of the aqueous slip in the casting room (pressure slip casting) but also the vacuum sucking of the dispersion medium (water) around the mold (vacuum slip casting). We prepared the alumina formed bodies by means of pressure-vacuum hybrid slip casting with stepwise pressure loading up to 0.5 MPa using a slip consisting of 40 vol% solid, 0.6 wt% APC, 1 wt% PEG, and 1 wt% PVA. After drying the green body at $30^{\circ}C$ and 80% RH, the green density of the alumina bodies was about 56% RD. The sintered density of an alumina plate created by means of sintering at $1650^{\circ}C$ for 4 h exceeded 99.8%.This method enabled us to fabricate a $110{\times}110{\times}20$ mm alumina plate without cracks and with a homogeneous density, thus demonstrating the possibility of extending the method to the fabrication of other ceramic products.