• 신재생에너지
• /
• 제1권2호
• /
• pp.41-52
• /
• 2005

The effects of internal manifold designs on the reactants feed-stream in Polymer Electrolyte Fuel Cells [PEFCs] is studied to figure out flow and thermal distribution patterns over an entire fuel cell stack. Reactants flows are modeled either laminar of turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-deter-mined for computational analysis. In this work, numerical models for reactants feed-stream In the PEFC manifolds are classified Into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also Investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique Is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain Information on the optimal design and operation of PEFC systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.149-149
• /
• 2009

Generally, Nafion ionomer is used in the polymer electrolyte fuel cell (PEFC) electrodes to achieve high power density. At the high temperature operation of PEFC, however, ionic conductivity of Nafion remarkably decreased due to the evaporation of water in Nafion polymer. Recently, many researchers have focused on using the Ionic Liquids(ILs) instead of water in Nafion polymer. ILs have intrinsic properties such as good electrochemical stability, high ionic conductivity, and non-flammability. Especially, ILs play a crucial role in proton conduction by the Grottuss mechanism and act as water in water-free Nafion polymer. However, it was found that the ILs was leached out of the polymer matrix easily. In this study, we prepared membrane electrode assemblies with various contents of ILs. The effect of ILs in the electrode of each designed was investigated by a cyclic voltammetry measurement and the cell performance obtained through a single cell test using H2/Air gases. Electrodes with different contents of ILs in catalyst layer were examined at high temperature and low humidified condition.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.868-877
• /
• 2011

This paper presents a parallel computing methodology for polymer electrolyte fuel cells (PEFCs) and detailed simulation contours of a real-scale fuel cell. In this work, a three-dimensional two-phase PEFC model is applied to a large-scale 200 $cm^2$ fuel cell geometry that requires roughly 13.5 million grid points based on grid-independence study. For parallel computing, the large-scale computational domain is decomposed into 12 sub-domains and parallel simulations are carried out using 12 processors of 2.53 GHz Intel core i7 and 48GB RECC DDR3-1333. The work represents the first attempt to parallelize a two-phase PEFC code and illustrate two-phase contours in a representative industrial cell.

• 대한기계학회논문집B
• /
• 제32권9호
• /
• pp.683-694
• /
• 2008

The performance and durability of Polymer Electrolyte Fuel Cells (PEFCs) are strongly influenced by the uniformity of current density, temperature, species distributions inside a cell In order to obtain uniform distributions in them, the optimal design of flowfield must be a key factor. In this paper, the numerical study of land/channel flowfield optimizations is performed, using a multi-dimensional, multi-phase, non-isothermal PEFC model. Numerical simulations reveal more uniform current density and HFR(High Frequency Resistance) distributions and thus better PEFC performance with narrower land/channel width where the less severe oxygen depletion effect near the land region and more uniform contact resistance variation along the in-plane direction are achieved. The present study elucidates detailed effects of land/channel width and assist in identifying optimal flow-field design strategies for the operation of PEFCs.

• 자원리싸이클링
• /
• 제26권3호
• /
• pp.79-91
• /
• 2017

수소연료전지자동차(FCV)의 핵심은 고분자고체형연료전지(Polymer Solid Fuell Cell: PEFC)이고 전지 중에서 전기화학적 전기를 발생하는 핵심 소재는 백금촉매이다. 백금은 남아프리카와 러시아 등에 편재되어있고, 백금의 세계생산량은 연간 약 178톤이고 고가이므로 리싸이클링 한다. 현재 PEFC에 Pt를 사용하는 양은 $0.2{\sim}0.1mg/cm^2$인데, 전지의 가격을 줄여서 FCV보급을 확대하기 위하여 사용하는 Pt양을 $0.05{\sim}0.03mg/cm^2$까지 감소시키는 것을 목표로 하여 각국이 연구 개발하고 있다. 나노배금 제조기술은 건식법과 습식법으로 크게 나누며 습식환원법을 중심으로 제조하는 방식이 Pt를 제조하는데 유리하다. 나노Pt를 이용하여 폴리올법, 개량형 Cu-UPD/Pt 치환법 및 나노캡슐법 등에 의해 $Pt-Pd/Al_2O_3$, Pt/C, Pt/GCB, Pt/Au/C, PtCo/C, PtPd/C 등의 Pt촉매가 연구 개발되고 있으며, Pt촉매의 활성향상 및 안정화 기술 등이 보고되고 있다. 본고는 나노Pt와 나노Pt촉매의 제조기술 및 폐 촉매의 리사이클링 및 Pt촉매의 응용기술 경향을 조사 분석하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권2호
• /
• pp.34-39
• /
• 1999

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.78-81
• /
• 2008

Residential fuel cell cogeneration systems have gained much interest due to its high efficiency. In the present study, we have performed numerical simulation of residential fuel cell cogeneration system which includes a fuel cell/battery hybrid system. The cogeneration system consists of 1kW PEFC, two 60Ah batteries, inverter/converter and reformer. Several empirical models have been employed for respective components to improve the accuracy of the simulations. The load varies seasonally. The present simulations can successfully predict the characteristics of the hybrid cogeneration system and thus it can be utilized for establishing an optimal operating strategy of the system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.55-58
• /
• 2008

Residential fuel cell cogeneration systems have gained much interest due to its high efficiency. In this study, we have performed numerical simulation of residential fuel cell cogeneration system which includes a fuel cell/grid hybrid system. The cogeneration system consists of 1kW PEFC, cooling system, inverter/converter and reformer. Several empirical models have been employed for respective components to improve the accuracy of the simulations. The load varies seasonally. The present simulations can successfully predict the characteristics of the hybrid cogeneration system and thus it can be utilized for establishing an optimal operating strategy of the system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3148-3153
• /
• 2008

Residential fuel cell cogeneration systems have gained much interest due to its high efficiency. In this study, we have performed numerical simulation of residential fuel cell cogeneration system which includes a fuel cell/grid hybrid system. The cogeneration system consists of 1kW PEFC, cooling system, inverter/converter and reformer. Several empirical models have been employed for respective components to improve the accuracy of the simulations. The load varies seasonally. The present simulations can successfully predict the characteristics of the hybrid cogeneration system and thus it can be utilized for establishing an optimal operating strategy of the system.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
• /
• pp.249-252
• /
• 2005