• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.199-204
• /
• 2015

Thermoplastic road markings are one of the most widely used road markings in the world. However, the durability of domestic road markings is relatively shorter than that of the global average of, approximately, three years. To overcome it, the conventional thermoplastic road markings were prepared by adding polyolefin and oxidized PE wax to conventional petroleum resin. In addition, the melting viscosity was designed below 500 cP at $220^{\circ}C$ as well as the optimum viscosity for spray painting, and embedding ratio of glass beads were controlled about 50~60% by spraying in an interval of 1 second. Also the glass bead adhesive ratio was improved by reducing the amount of $CaCO_3$ below 40 wt%. The retroreflectivity was tested under four different conditions to evaluate the abrasion resistance of thermoplastic road markings. The retroreflectivity coefficient satisfied the international standard ($150mcd{\cdot}m^{-2}{\cdot}lux^{-1}$) in this study, and TPRM-7 was determined as an optimal ratio.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.157-162
• /
• 2008

To investigate the characteristics of pyrolysis for LDPE, LLDPE and HDPE, the low temperature pyrolysis was carried out in the range of 425 to $500^{\circ}C$ for 35 to 65 min. The liquid products formed during pyrolysis were classified into gasoline, kerosene, light oil and wax according to the distillation temperatures based on the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. TGA experiments for three PE samples showed that the onset temperature of pyrolysis increased with increasing heating rate, and the onset temperature of pyrolysis at a fixed heating rate was in the order of LDPE$475^{\circ}C$. Yields of gasoline and kerosene were highest at $450^{\circ}C$, 65 min and decreased slightly at above $475^{\circ}C$.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.209-220
• /
• 2018

Mating disruption (MD) has been widely used to effectively control Grapholita molesta in apple orchards. A simultaneous mating disruption (SMD) techniques have been developed to control both G. molesta and G. dimorpha. This study was performed to determine the practical parameters to apply the SMD technique to field conditions. To determine the application amount of SMD lures, a dispenser containing 10 mg pheromone was placed at different numbers of trees in an orchard. Application at every other tree (= one dispenser per two trees) was relatively safe to expect effective MD efficiency in both wax and polyethylene (PE) formulations. One time application at the end of March was enough to maintain a year round MD efficacy against both species. A fence treatment using food trap was applied to prevent any immigratory mated females from nearby untreated regions. To enhance the food trap by adding host-derived secondary compounds, terpinyl acetate (TA) was screened to be effective to attract females of Grapholita molesta among six compounds contained in apple fruit extracts. Among different TA concentrations, 0.05% TA treatment was the most effective to attract the adults. A mixture of TA and sugar was effective to attract and kill females and called FAKT (female attract-to-kill techniques). FAKT was treated at approximately 6 m interval at the edge of the apple orchards. The females trapped by the FAKT included mated females possessing vitellogenic oocytes. SMD supplemented with FAKT maintained the high MD efficacy and significantly suppressed leaf damage induced by the two insect pests compared to control or single SMD treatment.