• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.223-228
• /
• 2012

The low-temperature pyrolysis of ABS, polyethylene (PE) and an ABS-polyethylene (ABS-PE) mixture was conducted in a batch reactor at $450^{\circ}C$. The conversion and the product yield were measured as a function of the reaction time with a variation of the mixture composition. The oil products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of the Ministry of Knowledge Economy. The pyrolysis conversion increases with an increase in the content of PE. The yield of the pyrolytic products was ranked as heavy oil>gas>gasoline>gas oil>kerosene as the content of PE in the mixture increases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.15-20
• /
• 2002

Quality variation of plastic pouch packing of Changran-Jeotgal produced by improved process and conventional process were investigated during storage at 10, 20 and $30^{\circ}C$, respectively. The kind of plastic pouch used in this study were polyethylene/nylon/linear low density polyethylene (PE/Ny), polyethylene terephthalatefpolyethyleneflinear low density polyethylene (PET) and low density polyethylene (PE). In the higher storage temperature, the faster increase of$ CO_2$, concentration and volume of pouch packing in all kinds of pouch. However, the highest value of pH, L-value, volatile basic nitrogen (VBN) and viable cell counts were shown in PE, the next was PET and PE/Ny, Overall, Changran-Jeotgal produced by improved process showed a little change of physical and chemical characteristics than conventional process. From above results, relationship between quality parameters were predicted pH, L-value, VBN and sensory score were highly correlated, therefore, these parameters is expected to uses as shelf-life indicated elements in cease of plastic pouch packaging.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.293-297
• /
• 2011

This experiment was conducted to elucidate the effects of mulching materials and removing time of the transparent polyethylene (PE) film on the growth of garlic at Uiseong experimental field, Korea. The experimental mulching materials comprised of transparent polyethylene film (0.025 mm) and net polyethylene (NPE). Plant height and leaf number of garlic were highest at PE treatment when the PE removing date was March 18 and this treatment also promoted the no. of cloves. Length of leaf sheath and bolting rate were highest and bulb weight loss rate was lowest at PE + NPE treatment when the PE removing date was March 18. But clove number was the lowest in this treatment compared to conventional PE film treatment. Conventional mulching method accelerated secondary growth rate but bulb weight loss was vice versa. There were statistically no differences in bulb diameter among treatments but conventional treatment positively focused on bulb diameter. Whenever PE film remove can suppress weeds compared to no mulching treatment but the dry weight of weeds were increasing trends as the removal dates of PE film were delayed. Transparent PE or PE + NPE treatments can be recommended to grow best quality garlic when PE film removing date is March 18.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.214-219
• /
• 2010

Polyethylene(PE) films were photocrosslinked by continuous UV irradiation. Benzophenone addition as low as 1wt% into the PE film increased the gel fraction up to 96%. The photocrosslinking was attributed to the recombination of PE radicals generated upon UV irradiation, which was enhanced by the hydrogen abstraction of the added benzophenone. Also the crossliked PE showed higher thermal stability and decreased crystallinity with increasing UV energy as shown by TGA, XRD and DSC analysis. It was also possible to fix 5.4% octadecane into PE by the photocrosslinking. The crosslinked PE film containing octadecane showed lower tensile strength and modulus coupled with higher extension compared to that without octadecane, which can be used as a new plasticizing method for the crosslinked PE film.

• Clean Technology
• /
• v.4 no.2
• /
• pp.32-40
• /
• 1998

The polymeric porous materials which consist of polypropylene(PP) and polyethylene(PE) powder were prepared to apply to the air purification systems by extrusion sintering method. SEM analysis showed that a composite polymeric porous structure made up of PP and PE was obtained, where PE was melted and adhered to PP because the melting temperature of PE was lower than that of PP. The filtration characteristics and mechanical properties of polymeric porous materials were investigated by varying the head die temperature of the extruder, extrusion velocity, and the melt index and quantity of PE. The filtration efficiency was proportional to the quantity of PE but inversely proportional to the melt index of PE. The polymeric porous materials composed of PP and PE, which was made by extrusion sintering method, was found to be suitable for the filter element of the air purification system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.182-188
• /
• 2008

The compounds of recycled polyethylene(PE) and fly-ashes were prepared. Polymers used were sorted PE from mixed plastics of household waste and Low Density Polyethylene(LDPE) and Linear Low Density Polyethylene(LLDPE) recycled from the scrap of packaging film plants. Fly-ashes were from the power plant and from the household waste incinerator. The tensile strength of recycled LDPE and LLDPE compounds decreased and the flexural modulus increased with greater amount of the power plant fly-ash. Anthracite fly-ash gave rise to slightly higher tensile and flexural strength of the LLDPE mixtures than bituminous coal fly-ash presumably due to higher content of unburned carbon. The incinerator fly-ash introduced to household waste PE enhanced both tensile strength and flexural modulus of the compounds. When LDPE and household waste PE were used together, the synergistic effect of incinerator fly-ash to household waste PE was offset by reduced crystallization of LDPE due to the filler particle. The compounds of household waste PE and incinerator fly-ash might be applied to structural materials for such as sewage pipe, which reduces the waste treatment cost and conserve the environment and resources.

• Clean Technology
• /
• v.15 no.2
• /
• pp.109-115
• /
• 2009

The low temperature pyrolysis of polyethylene (PE), polypropylene (PP) and polyethylene-polypropylene (PE-PP) mixture in a batch reactor at the atmospheric pressure and $450^{\circ}C$ was carried out to investigate the synergy effect of PE-PP mixture. The pyrolysis time was from 20 to 80 mins. The products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Korea Institute of Petroleum Quality. The analysis of the product oils by GC/MS showed that no new component was detected and no synergy effect was made by mixing of PE and PP. Conversions and yields of PE-PP mixtures were linearly dependent on the mixing ratio of samples.

• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.233-239
• /
• 2016

Polyethylene (PE) and maleic anhydride-grafted PE (PE-g-MAH) were pyrolyzed, and their pyrolysis products were analyzed using gas chromatography/mass spectrometry (GC/MS) to investigate the influence of MAH grafted onto PE on pyrolysis behaviors. Major pyrolysis products of PE and PE-g-MAH were n-alkanes, 1-alkenes, ${\alpha},{\omega}$-alkadienes, and aromatic compounds. 1-Alkenes were more formed than n-alkanes, ${\alpha},{\omega}$-alkadienes, and aromatic compounds. Butadiene was more produced from PE than PE-g-MAH, whereas toluene and ethyl benzene were more generated from PE-g-MAH than PE. Difference in the pyrolysis behaviors between PE and PE-g-MAH were explained by initial decomposition of MAH moiety.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1298-1305
• /
• 2000

Potato starches were crosslinked with 0.1, 0.5, 1.0, and 2.0% epichlorohydrin. Starch/polyethylene(PE) cast films were prepared to contain 5% of the crosslinked potato starch. Mechanical properties and degradability of these films were measured and compared to those of the films containing native potato starch. Mechanical strength of the films containing crosslinked potato starch was higher than that of the film containing native starch. Thermal degradability measured by a FT-IR and an Instron showed that crosslinked starch/PE films degraded faster than native starch/PE films. Biodegradability of the starch/PE films was accelerated by the addition of crosslinked starch to the PE films.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.1
• /
• pp.8-11
• /
• 1986

There have been many difficulties in utilization of polyethylene (PE) container for volatile ingredients because of its high permeability. We selected glycol-modified polyethylene terephthalate (PETG) lately being used and evaluated the stability of 0.5% chlorobutanol solution for PETG. We used PE bottle, glass flask and rubber stoppered vial for comparison and assayed chlorobutanol contents of the samples stored at various temperatures for nine weeks by HPLC method. The results indicated that the stability of chlorobutanol in PETG container was almost similar to that in glass flask, and was superior to that in PE bottle and rubber stoppered vial.