• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.194-195
• /
• 2002

투명 전도성 박막은 저방출 코팅, 평판디스플레이의 투명전극, 플라즈마 디스플레이 패널(PDP)의 전자파 장해 차폐 둥의 넓은 영역에서 사용되고 있다 특히 PDP의 전자파 장해(electromagnetic interference; EMI)를 막기 위한 필터는 광학적으로 가시광선영역의 높은 투과율과 전도성이 우수한 전기적 특성을 갖고 있어야 한다 이러한 고 효율의 투명전도성 박막은 일반적으로 (산화물-금속-산화물) 형태로 제작된다(1). (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.437-443
• /
• 2003

A interference of outside electric source and electric fast transient(EFT) are origins of destroy and malfunction in the precise electrical and electronic equipments. It makes a serious obstacle as the form of conducted noise. Therefore, it is strongly needed to protect precision electrical and electronic equipments from the interference and EFT. In this research, a EMC filter composed of feed-through capacitors and ferrite beads of high permeability is designed and it＇s properties are investigated for PDP. The filter produced in this research have wide band frequency characteristics and more than 40 dB reflection loss in the frequence of 10 MHz∼1.5 GHz which satisfy the standard of CISPR Pub. 22 and the level 4 of IEC 61000-4-4.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.217-217
• /
• 2010

산화물유전체/금속/산화물유전체(D/M/D) 구조의 투명전극은 우수한 통전성과 투광성을 갖는 동시에 근적외선 및 전자파 차폐가 가능하여 각종 디스플레이 장치로의 응용을 위해 많은 연구가 진행 중이다. 이러한 구조의 다층막의 경우 금속층과 산화물층간 계면에서의 산소확산으로 인한 광학적, 전기적 특성 저하가 문제가 되고 있다. 본 연구에서는 층간 산소확산방지를 통해 다층막의 전기적 특성을 개선하기 위해 $TiO_2$/Ag/$TiO_2$, $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ 구조의 다층막을 DC/RF 마그네트론 스퍼터를 이용하여 제조하여 ZnS 박막이 다층막의 특성에 미치는 영향을 비교 평가하였다. 제조된 박막의 전기적, 광학적, 계면 특성을 4-point probe, Spctrophotometer, AES을 이용하여 분석하였으며 PDP필터용 전극으로의 적용 가능성을 평가하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.82-83
• /
• 2003

일반적인 PDP (Plasma display panel)용 전도성 저방출(low-e) 필터는 유리 기판 위에 굴절률이 높은 금속 산화물 유전체 박막과 Ag와 같은 귀금속 박막이 번갈아 쌓인 [유전체｜금속(Ag)｜유전체]가 기본 구조인 다층 박막의 형태로 개발되어 왔다. Ag는 가시광선 영역에서 다른 금속보다 작은 흡수를 보이고 전도성이 뛰어나 전자파 차페용 필터의 전도성 박막으로 널리 쓰인다. 그리고 이러한 구조에서 가시광선의 높은 투과율을 유지하면서 유해 전자기파를 차폐할 수 있도록 충분한 전도성을 갖추기 위해서는 2층 이상의 Ag 박막이 존재하도록 설계되며 유전체 박막과 금속 박막 사이에 1∼2 nm 정도의 매우 얇은 금속 보호 층을 사용한다. (중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.188-188
• /
• 2001

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.226-232
• /
• 2002

We searched thermal stability of ${\alpha}-Fe_2O_3$ using red color filter for display. In the PDP(Plasma Display Panel), the color filter layer is lied normally between front glass and transparent dielectric materials, so it might be needed to study the reaction of ${\alpha}-Fe_2O_3$ and transparent dielectric materials. The transparent dielectric materials containing ZnO has good transparency. Red colorlayer of ${\alpha}-Fe_2O_3$ contacted with dielectric material layer containing ZnO is changed to colorlessness over 500$^{\circ}$C because ZnO defuse ${\alpha}-Fe_2O_3$, the dielectric materials without ZnO, however, maintain red color at the same condition. We suggest that a layer contacting with ${\alpha}-Fe_2O_3$ red color layer has to lie with transparent dielectric materials without ZnO, then the materials containing ZnO is coated over to get color of ${\alpha}-Fe_2O_3$ for red color filter

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.143-145
• /
• 2008

최근 각종 전자기기의 슬림화 추세에 따라 PDP PSU(Power Supply Unit) 또한 슬림화가 진행되고 있다. 슬림화를 위해서는 방열판과 벌크(Bulk) 커패시터, 입력단의 필터와 인덕터류, 그리고 변압기의 높이를 줄이는 것이 중요하다. 그 중에서도 변압기의 높이를 줄이는 것이 가장 큰 관건이다. 하나의 변압기를 사용할 경우 슬림화의 한계성을 가지기 때문에 적용된 변압기는 두 개의 LLT 변압기로 구성 하였으며 1차측과 2차측의 결선 방법을 통해 두 LLT변압기간의 전류 불균형 문제를 최소화 할 수 있도록 하였다. 그리고 높이 35mm 시제품을 제작하여 50HD PDP 전원에 적용시켜 검증한 결과를 나타내었다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.31-43
• /
• 2008

The functional dyes, which has various optical characteristics that can be applicable to field of electronic, photo electronic, such as sensor or electrode, were synthesized. Physical property and optical stability was studied with preparation of conductive type film as a kind of optical filter of plasma display panel, by adapting neon cut off dye, which can selectively absorbing between 580 and 610nm wavelength. The filter was prepared with PSA resin, which has functional group of - COOH and - OH, as binder. And the characters such as spectroscopy, heat-proof / wet-proof, thermal stability and commerciality, which must be held by functional dyes, were examined. Conductive type film is the kind of film includes only neon cut off dyes. For the neon cut off dyes, cyanine dyes can be applied. And it is observed that spectrum of before and after the durability test are not changed due to stability of dyes, as the result of coating on the mesh film with PSA binder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.681-684
• /
• 2010

The $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ multilayered structure for the transparent electrodes in plasma display panel was designed by essential macleod program (EMP) and the multilayered film was deposited on a glass substrate by direct-current (DC)/radio-frequency (RF) magnetron sputtering system. During film deposition process, the Ag layer in $TiO_2$/Ag/$TiO_2$ structure became oxidized and the filter characteristic was degraded easily. In this study, ZnS layer was adopted as a diffusion blocking layer between $TiO_2$ and Ag to prevent the oxidation of Ag layer efficiently in $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ structure. Based on the AES depth profiling analysis, the Ag layer was effectively protected by the ZnS layer as compared with the $TiO_2$/Ag/$TiO_2$ multilayered films without ZnS as an antioxidant layer. The 3 times stacked $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ films have low sheet resistance of $1.22{\Omega}/{\square}$ and luminous transmittance was as high as 62% in the visible ranges.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.14-20
• /
• 2008

In recent days, a wide angle for slim depth in CRT(Cathode ray tube) is required to meet other rapidly growing slim FPD such as LCD and PDP. However, in making the CRT with a wide angle screen, problems, such as a difficulty in forming black matrix, and excessive formation of black matrix, can be occurred. In this work, we designed a new exposure filter systm to avoid these problems for a wide angle CRT. We changed the design concept from a filter-to-Panel method to a Panel-to-fater control method, which can control the Black Matrix to easily satisfy the user's request. This study suggests new filter design method for a wide angle CRT which has good screen qualify.