• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2020

Thermographic phosphor (TP) thermometry is a noncontact optical measurement method and has been applied in many fields such as combustion and heat transfer. However, due to the limitation of bonding technology and measurement method, most TP thermometry studies were conducted only on the air environment with water-soluble binders. In this paper, a temperature measurement technology in water using TP is proposed by coatings of manganese activated magnesium fluorogermanate (Mg4FGeO6:Mn4+, MFG) with Polydimethylsiloxane (PDMS). Four MFG-PDMS coatings with different thicknesses were prepared. The lifetime of MFG was not affected by the thickness of the coating as a result of the experiment and analysis of phosphor intensity using a photomultiplier tube. To measure the surface temperature field of an immerged body in water, a cylinder-type cartridge heater was coated with MFG doped PDMS. Transient surface temperature field was successfully measured even the initial temperature is higher than the boiling point of water.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.1-10
• /
• 2014

Offset paper printing is a promising roll-to-roll technique for color printed materials. Although it is no doubt that understanding ink transfer mechanism in offset printing process is necessary to achieve high printing quality, investing the relationship between inks and substrates at the nip is difficult experimentally due to high printing speed. In this paper, rheological behavior and splitting point of the ink at the nip is studied using package software Ployflow and Flow 3D based on Navier-Stokes equation. Polydimethylsiloxane (PDMS) ink and IGT printability tester were used for an model ink and experiment to compare with that of simulation data, respectively. As a result, higher viscosity at state flow and pressure increased ink transfer due to higher possibility of presence of cavitation at the nip and increase in covering area ratio. These results have shown good agreements with experimental data compared by measuring density of print through.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.919-921
• /
• 2005

We describe that an elastomeric stamp of poly(dimethylsiloxane) (PDMS) can modify the surface energy of some surfaces when brought into conformal contact with the number of stamping. We focus on an increase of the hydrophobicity of the patterned surface due to diffusion of low molecular weight (LMW) silicone polymer chains. The transfer of PDMS to the surface during patterning is relevant to and calls for attention by those who are using this method in applications where control of the surface chemistry is of importance for the application.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.391-401
• /
• 2021

In the present study, a hyperelastic constitutive model is built by complying with a simplified hyperelastic strain energy function, which yields the numerical solution for a deformed polydimethylsiloxane (PDMS) membrane in the case of axisymmetric hydraulic pressure. Moreover, a nonlinear equilibrium model is deduced to accurately express the deformation of the membrane, laying a basis for precise analysis of the optical transfer function. Comparison to experimental and simulated data suggests that the model is capable of accurately characterizing the deformation behavior of the membrane. Furthermore, the stretch ratio derived from the model applies to the geometrical optimization of the deformed membrane.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.30-34
• /
• 2008

The transfer assembly (or transfer printing) technique is a promising method for fabricating multi-scale structures on various substrates including semiconductors and polymers, and has been applied to fabrication of flexible devices with superior performance to conventional organic flexible devices. The mechanical behaviors of the structures fabricated by the transfer assembly is a very important information for design and reliability evaluation purpose, but the measurement of the behaviors is difficult since their critical-dimensions are very tiny. In this study, Au films with nano-scale thickness were fabricated on a silicon substrate and their mechanical properties were measured using micro-tensile test. The Au films on the silicon substrate were then transferred to a PDMS substrate using the transfer assembly technique. Self-assembled monolayer (SAM) with a thiol group was used to enhance the transfer of Au films, and the mechanical behaviors were characterized using wrinkle-based test. The test results from micro-tensile and wrinkle-based test are compared to each other, and their implication to the transfer assembly technique is discussed.

• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.43-47
• /
• 2018

본 연구에서는 silver nanowire (AgNW)를 polydimethylsiloxane (PDMS) 기판에 embedding하여 손가락 움직임을 전기 신호로 읽을 수 있는 투명 저항식 변형 센서를 제작하였다. 이후 bluetooth를 이용한 무선 통신의 방식으로 변형 센서가 내는 데이터를 컴퓨터와 스마트폰 앱으로 전송하는 근거리 통신을 가능하게 하였다. 최종적으로 데이터 가공공정을 통하여 스마트폰 앱으로 변형 센서에 의한 손가락 움직임을 읽고 이미지를 변환시키는 프로그램을 제작하여 컴퓨터와 스마트폰 앱으로 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.315-318
• /
• 1999

As low-cost optical waveguides of optical interconnects, we fabricate multimode optical waveguides using a molding process The core size of a optical waveguide is 47 ${\mu}{\textrm}{m}$ $\times$ 41 ${\mu}{\textrm}{m}$. We use the photoresist AZ9260 as a master, polydimethyl-siloxane (PDMS) as a mold. In transferring process to polymeric material, we employ a modified micro-transfer molding process. All processes are simple and low-cost.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1857-1863
• /
• 2010

본 논문에서는 탄소나노튜브 필름을 이용한 투명 압저항체의 제작 및 특성 연구를 수행하였다. 진공필터 방식으로 제작된 다양한 투과도를 가지는 탄소나노튜브 필름은 금층이 증착된 실리콘 기판위에서 사진식각 공정을 통해 패터닝이 된 후, 금층과 실리콘 기판의 약한 접착력으로 인해 실리콘 러버인 poly-dimethysiloxane (PDMS) 로 전사된다. 탄소나노튜브 필름의 압저항 특성을 분석하기 위해, 얇은 PDMS 멤브레인의 처짐에 대한 탄소나노튜브 필름의 저항 변화를 측정하여 10-20 의 개이지 팩터를 얻었으며, 인가 압력에 대한 저항 변화 실험을 수행하였다. 본 실험을 통하여 탄소나노튜브 필름은 폴리머 멤스의 다양한 응용분야에 투명한 압저항체로 사용될 수 있을 것으로 판단한다.

• 멤브레인
• /
• 제11권2호
• /
• pp.74-82
• /
• 2001

실리콘(PDM)막을 통한 휘발성유기화합물(VOCs)과 질소 혼합물의 증기투과시 공급부 경계층에서 발생하는 VOCs의 농도분극 현상을 정량적인 평가를 위하여 저항직렬연결의 개념을 바탕으로 한 수학적인 모델식을 확립하였다. feed속도를 변화시키면서 여러 VOCs 혼합물에 대한 증기투과를 시행하였는데 본 연구에 사용한 VOCs는 염소화 탄화수소계 중에서 응축도가 다른 methylene chloride, chloroform, 1,2-dichloroethane, 1,1,2-trichloroethane 등을 선정하여 사용하였다. 확립한 모델식에 각 혼합물의 투과 실험치들의 frtting 및 regression을 통하여 각 모델 파라메타들을 구하고 물질전달계수 및 농도분극탄성률 등을 결정하였다. 결정한 모델 파라메타를 분석한 결과 VOCs의 응축도가 클수록 경계층 저항이 현저함을 관찰할 수 있었으며 또한 모델링을 통해서 고 투과성 고 선택성막을 통한 증기투과에서 경계층저항의 중요성을 확인할 수 있었다.

• 청정기술
• /
• 제12권2호
• /
• pp.62-66
• /
• 2006

다양한 폴리디메틸실록산계 공중합체를 안정화제로 이용하여 초임계 이산화탄소 내에서의 개환중합을 통해 PLLA를 제조하였다. 초임계 개환중합에 사용된 폴리디메틸실록산 공중합체는 폴리디메틸실록산 거대개시제를 사용하여 그룹전이중합법(GTP법)을 이용하여 제조하였다. $\small{L}$-락타이드의 초임계 현탁중합을 통해 수미크론크기의 입자가 형성되었음을 전자 주사 현미경을 통해 확인하였고, 또한 겔 투과 크로마토 그라피 분석을 통해 상당히 좁은 분자량 분포의 PLLA가 제조되었음을 확인하였다.