• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.121-127
• /
• 2022

Micro-LED is a light-emitting diode smaller than 100 ㎛ in size. It attracts much attention due to its superior performance, such as resolution, brightness, etc., and is considered for various applications like flexible display and VR/AR. Micro-LED display requires a mass transfer process to move micro-LED chips from a LED wafer to a target substrate. In this study, we proposed a vacuum chuck method as a mass transfer technique. The vacuum chuck was fabricated with MEMS technology and PDMS micro-mold process. The spin-coating approach using a dam structure successfully controlled the PDMS mold's thickness. The vacuum test using solder balls instead of micro-LED confirmed the vacuum chuck method as a mass transfer technique.

• Molecular & Cellular Toxicology
• /
• v.2 no.4
• /
• pp.279-284
• /
• 2006

This paper describes the fabrication methods of a carbon nanotube (CNT) filter and a microdialysis chip. A CNT filter can help perform dialysis on a microfluidic chip. In this study, a membrane type of a CNT filter is fabricated and located in a microfluidic chip. The filter plays a role of a dialysis membrane in a microfluidic chip. In the fabrication process of a CNT filter, individual CNTs are entangled each other by amide bonding that is catalyzed by 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The chemically treated CNTs are shaped to form a CNT filter using a PDMS film-mold and vacuum filtering. Then, the CNT filter is sandwiched between PDMS substrates, and they are bonded together using a thin layer of PDMS prepolymer as adhesive. The PDMS substrates are fabricated to have a microchannel by standard photo-lithography technique.

• Transactions of Materials Processing
• /
• v.13 no.4
• /
• pp.326-333
• /
• 2004

The nanoprobe based on lithography, mainly represented by SPM based technologies, has been recognized as a potential application to fabricate the surface nanosctructures because of its operational versatility and simplicity. However, nanoprobe based on lithography itself is not suitable for mass production because it is time a consuming method and not economical for commercial applications. One solution is to fabricate a mold that will be used for mass production processes such as nanoimprint, PDMS casting, and others. The objective of this study is to fabricate the silicon stamper for PDMS casting process by a mastless fabrication technique using the combination of nano/micro machining by Nanoindenter XP and KOH wet etching. Effect of the Berkovich tip alignment on the deformation was investigated. Grooves were machined on a silicon surface, which has native oxide on it, by constant load scratch (CLS), and they were etched in KOH solutions to investigate chemical characteristics of the machined silicon surface. After the etching process, the convex structures was made because of the etch mask effect of the mechanically affected layer generated by nanoscratch. On the basis of this fact, some line patterns with convex structures were fabricated. Achieved groove and convex structures were used as a stamper for PDMS casting process.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.170-174
• /
• 2021

As the rising attention to the medical and healthcare issue, Bio-MEMS (Micro electro mechanical systems) platform such as bio sensor, cell culture system, and microfluidics device has been studied extensively. Bio-MEMS platform mostly has high resolution structure made by biocompatible material such as polydimethylsiloxane (PDMS). In addition, three dimension structure has been applied to the bio-MEMS. Lithography can be used to fabricate complex structure by multiple process, however, non-rectangular cross section can be implemented by introducing optical apparatus to lithography technic. X-ray lithography can be used even for sub-micron scale. Here in, we demonstrated lines with round shape cross section using the tilted gold absorber which was deposited on the oblique structure as the X-ray mask. This structure was used as a mold for PDMS. Molded PDMS was applied to the cell culture platform. Moreover, molded PDMS was bonded to flat PDMS to utilize to the sub-micro channel. This work has potential to the large area bio-MEMS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.351-354
• /
• 2004

This work presents a simple and cost-effective approach for maskless fabrication of positive-tone silicon master for the replica molding of hyperfine elastomeric channel. Positive-tone silicon masters were fabricated by a maskless fabrication technique using the combination of nanoscratch by Nanoindenter ⓡ XP and XOH wet etching. Grooves were machined on a silicon surface coated with native oxide by ductile-regime nanoscratch, and they were etched in a 20 wt％ KOH solution. After the KOH etching process, positive-tone structures resulted because of the etch-mask effect of the amorphous oxide layer generated by nanoscratch. The size and shape of the positive-tone structures were controlled by varying the etching time (5, 15, 18, 20, 25, 30 min) and the normal loads (1, 5 mN) during nanoscratch. Moreover, the effects of the Berkovich tip alignment (0, 45$^{\circ}$) on the deformation behavior and etching characteristic of silicon material were investigated.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.14-17
• /
• 2006

This paper describes a novel processing technique for fabrication of polymer-derived SiCN (silicone carbonitride) microstructures for super-temperature MEMS applications. PDMS (polydimethylsiloxane) mold is fabricated on SU-8 photoresist using standard UV photolithographic process. Liquid precursor is injected into the PDMS mold. Finally, solid polymer structure is cross-linked using HIP (hot isostatic pressure) at $400^{\circ}C$, 205 bar Optimum pyrolysis and anneal ins conditions are determined to form a ceramic microstructure capable of withstanding over $1400^{\circ}C$. The fabricated SiCN ceramic microstructure has excel lent characteristics, such as shear strength (15.2 N), insulation resistance ($2.163{\times}10^{14}\;{\Omega}$) and BDV (min. 1.2 kV) under optimum process condition.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.503-504
• /
• 2006

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.168-169
• /
• 2021

A hydrophobic surface increases the contact angle between water and cement paste. There are two methods to increase water contact angle, i.e. lowering the surface energy and adjusting the surface roughness of concrete. The hydrophobicity of concrete can be quantitatively evaluated according to the chemical and physical properties of the solid surface. So far, researches have shown the chemical properties of hydrophobic concrete, however it has not covered how to control surface. This study demonstrated the hydrophobic cement paste prepared by low-resolution molds printed with a 3D printer that exhibit rough surface. Thus, we presented the most hydrophobic characteristics of mold.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.294-294
• /
• 2013

소수성을 띄는 표면은 자연으로부터 시작된 연구이다. 연잎, 소금쟁이 다리, 매미 날개 등 많은 자연의 표면은 150o보다 높은 접촉각을 지니기 때문에 물에 대한 반발이 심해져 약간의 기울임에도 쉽게 물방울이 굴러 떨어지고 이때 먼지를 제거할 수 있다. 자연현상을 이용해 물질 표면의 소수성 제어에 대한 다양한 연구가 진행 중이다. 친수성과 소수성은 일반적으로 표면에서 물방울의 contact angle 측정으로 확인 할 수 있다. Contact angle이 $90^{\circ}$ 작을 경우 친수성, $90^{\circ}$보다 클 경우 소수성이라고 한다. 이러한 기술을 이용해서 solar cell, 자동차 유리, 건물외벽, 등 다양한 분야에서 사용하고 있으며, 소수성 구조를 만드는 방법으로는 laser ablation, wet etching, 리소그라피 공정이 있는데, laser ablation의 경우 가격이 비싸다는 단점을 가지고 있으며, 반면 가격이 저렴한 wet etching의 경우 제어가 힘들다는 단점을 지니고 있다. 리소그라피 공정은 비싼 비용과 시간을 소비해야 하는 단점을 지니고 있다. 본 연구에서는 이러한 단점들을 개선하기 위해 공정 시간의 감소와, 저 비용으로 제작이 가능한 RIE (Recative Ion Etching)로 피라미드 구조를 만들었다. 형성된 구조물에 투명하고 균일하며, 낮은 계면에너지를 갖고 있는 PDMS (polydimethelsiloxine)로 mold을 수행하였다. RIE를 이용한 표면 구조는 Gas, Flow rate, Pressure, Power, Time 등을 조절하여 단결정 실리콘 기판 위에 피라미드의 크기를 조절하였다. 피라미드의 크기가 커짐에 따라 물과 PDMS가 닿는 면적이 줄어들면서 높은 소수성을 가지게 되는데, 높은 소수성 구조를 가지는 피라미드 형상을 찾기 위한 실험을 진행하였다. RIE 조건은 Flow rate: 30 sccm, Temperature: $10^{\circ}C$ Pressure: 100 mTorr, Power: 200 W, Process Time: 5~50 min으로 조절하며 공정을 수행하였고 RIE공정 후 SAMs (Self-Assembly Monolayers)을 진행하였으며, 마지막으로 PDMS를 이용하여 mold공정을 진행하였다. 그리고 SEM (Scanning Electron Microscope)장비를 이용하여 Etching된 단면을 관찰하였으며, 접촉각을 측정하였다. Process Time을 50 min로 공정하였을 때, 측정된 접촉각은 $134^{\circ}$였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1088-1090
• /
• 2002

In this study, a new processing route of barrier ribs for the plasma display panels was attempted. A slurry containing ceramic powders for the barrier ribs, binder, hardener, and other additives, was molded into a PDMS mold by capillary infiltration process. The molded slurry was cured prior to mold removal. It was demonstrated that the process can fabricate successfully the cell type barrier ribs of PDP.