• 제목/요약/키워드: PDMS/DVB

검색결과 15건 처리시간 0.032초

SPME법을 이용한 전통 향료 유전자원 산초 및 초피의 정유성분 분석 (Volatile Components Analysis using SPME in Traditional Aromatic Plant Resources, Zanthoxylum schinifolium Siebold et Zucc. and Z. piperitum DC)

  • 조민구;채영암;송지숙
    • 한국약용작물학회지
    • /
    • 제9권3호
    • /
    • pp.192-197
    • /
    • 2001
  • 간편하고 효과적인 정유성분 분석을 위해 SPME fiber를 선별하고 산초와 초피의 개체 정유성분 분석에 적합한 SPME fiber를 찾고자 실험한 결과는 다음과 같다. 단일물질별 흡착율은 PDMS, PDMS/DVB, CAR/PDMS 가 우수했다. 10종의 단일물질 표준품 혼합액 흡착 실험에서 직접주입 했을때와 가장 유사한 결과를 보인 것은 PDMS, PDMS/DVB fiber이였다. 최종 선발된 PDMS와 PDMS/DVB를 이용하여 24종의 단일물질 표준품 흔합액 흡착과 직접주입시를 비교한 결과 이들 간에 차이가 없었다. 또한 GC주입구의 split ratio별 성분의 검출에서도 차이가 없었다. 흡착시간이 길어질수록 분자량이 큰 성분의 흡착율이 높아지는 경향을 보였지만, 직접주입시와 비교해 볼 때 적절한 흡착시간은 30-40분이였다. SDE 추출물을 이용한 산초와 초피나무 개체 정유성분 분석에는 산초와 초피 모두 PDMS/DVB가 흡착시간 30-40분에서 분자량이 큰 sesquiterpene류까지 흡착하는데 유리하였다.

  • PDF

Volatile Component of Pine Needles from Pinus densiflora S. using Solid Phase Microextraction-Ges Chromatography-Mass Spectrometry

  • Lee Jae-Gon;Lee Chang-Gook;Back Shin;Jang Hee-Jin;Kwag Jae-Jin;Lee Gae-Ho
    • 한국식품영양학회지
    • /
    • 제18권4호
    • /
    • pp.373-379
    • /
    • 2005
  • The volatile components of Pinus densiflora needles were studied by gas chromatography-mass spectrometry(GC-MS), using seven kinds of solid phase microextraction (SPME) fibers, seven in SPME fibers: 100 ${\mu}m$ PDMS, 65 ${\mu}m$ PDMS/DVB, 65 ${\mu}m$ SF-PDMS/DVB, 85 ${\mu}m$ PA, 75 ${\mu}m$ CAR/PDMS, 65 ${\mu}m$ CW/DVB and 50/30 ${\mu}m$ DVB/CAR/PDMS fibers. A total of 40 components were identified by using the seven different SPME fibers. The identified components were classified, according to their functionalities, as follows: 26 hydro-carbons, 7 alcohols, 4 carbonyl compounds, and 3 esters. The major volatile components of Pinus densiflora needles identified by these SPME fibers were $\alpha$-pinene ($1.7\~21.7\;{\mu}g/g$), $\beta$-myrcene ($2.0\~20.1\;{\mu}g/g$), $\beta$-phel-landrene ($4.6\~22.8\;{\mu}g/g$), $\beta$-caryophyllene ($6.7\~26.0\;{\mu}g/g$) germacrene D ($1.1\~11.9\;{\mu}g/g$). In the comparison of the seven SPME fibers, PDMS appeared to be the most suitable fiber for the analysis of hydrocarbon compounds and CAR/DPMS, PDMS/DVB, CW/VB and DVB/CAR/PDMS are shown to be optimal for analysis of the alcohols and carbonyl compounds.

Characterization of the Aroma of Salt-fermented Anchovy Sauce Using Solid Phase Microextraction-Gas Chromatography-Olfactometry Based on Sample Dilution Analysis

  • Kim, Hyung-Joo;Baek, Hyung-Hee
    • Food Science and Biotechnology
    • /
    • 제14권2호
    • /
    • pp.238-241
    • /
    • 2005
  • Aroma-active compounds were evaluated from salt-fermented anchovy sauce by solid phase microextraction-gas chromatography-olfactometry (SPME-GC-O) based on sample dilution analysis (SDA). SPME extract from carboxen/polydimethylsiloxane (CAR/PDMS) fiber was the most similar to the original odor of salt-fermented anchovy sauce used for this experiment, followed by divinylbenzene/CAR/PDMS (DVB/CAR/PDMS) fiber. Because salt-fermented anchovy sauce contains 23% NaCl, NaCl concentration of diluent was considered when salt-fermented anchovy sauce was serially diluted. Linear relationship between GC response and sample concentration was observed when diluted with 23% NaCl solution, whereas not observed when diluted with deodorized distilled water. Eleven and 16 aroma-active compounds were detected by SPME-GC-O based on SDA using CAR/PDMS and DVB/CAR/PDMS fibers, respectively. Butanoic acid and 3-methyl butanoic acid showed the highest ${\log}_2SD$ factors for CAR/PDMS and DVB/CAR/PDMS fibers. Dimethyl trisulfide, methional, trimethyl amine, 1-penten-3-ol, and acetic acid were also detected as potent aroma-active compounds.

Solid Phase Microextraction을 이용한 계피의 향기성분 분석 (Analysis of Aroma Compounds of Cinnamon by Solid Phase Microextraction)

  • 이창국;이재곤;장희진;곽재진
    • 한국식품영양학회지
    • /
    • 제16권4호
    • /
    • pp.372-378
    • /
    • 2003
  • SDE 및 SPME를 이용하여 계피로부터 추출한 휘발성 향기성분을 GC/MSD 분석한 결과 terpenes 20종, alcohol 3종, carbonyl 5종, esters 2종으로 총 30개의 휘발성 성분을 확인하였다. 이들 중 trans-cinnamaldehyde (86.4%), cis-cinnamaldehyde(0.9%), hydrocinnamaldehyde (0.1%) 등의 carbonyl 화합물이 peak area% 기준으로 약 88.2%로 계피 중 대부분을 차지하는 것으로 나타났다. 또한 식물체의 향기성분 분석에 많이 이용되는 SPME fiber 4종류를 비교 분석한 결과 terpen류 화합물들은 PDMS fiber에서 추출효율이 가장 좋았으며, cinnamyl alcohol과 같은 다소 극성인 화합물의 경우 DVB/CAR/PDMS fiber와 PA fiber에서 추출 효율이 가장 좋은 것으로 나타났다. SPME법에서 최적 조건을 설정하기 위해 추출온도와 추출시간을 달리하면서 비교 분석한 결과 copaene, murolene, cadinene, cis-cinnamaldehyde 등의 area% 값은 온도와 시간이 커질수록 증가한 반면에 trans-cinnamaldehyde의 area% 값은 감소하였다.

HS-SPME-GC/MS를 이용한 해수 내 유류계 방향족탄화수소 분석법 (Determination of Petroleum Aromatic Hydrocarbons in Seawater Using Headspace Solid-Phase Microextraction Coupled to Gas Chromatography/Mass Spectrometry)

  • 안준건;심원준;하성용;임운혁
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제17권1호
    • /
    • pp.27-35
    • /
    • 2014
  • 해수 내 유류계 방향족탄화수소인 BTEX(benzene, toluene, ethylbenzene, xylene)와 다환방향족탄화수소(polycyclic aromatic hydrocarbons: PAHs)를 동시에 분석할 수 있는 기술 개발을 위해 GC/MS에서 고체상미량추출법(solid phase microextraction: SPME)을 이용하여 최적의 분석기법을 정립하였다. SPME 기법은 전통의 분석 방법과 비교할 때 조작이 간단하고, 파이버를 재사용할 수 있고, 휴대하기 쉽고, 시료의 운반이나 저장하는 동안 오염을 최소화 할 수 있는 장점이 있다. 최적의 SPME 조건을 정립하기 위해 여러 변수 즉, SPME 수착제, 흡착 시간, 흡착 온도, 교반 속도, GC 탈착 시간들을 확인하였다. 다양한 SPME 수착제($100{\mu}m$ PDMS, $75{\mu}m$ CAR/PDMS, $65{\mu}m$ PDMS/DVB)를 이용하여 BTEX와 PAHs(분자량 78부터 202까지)를 동시에 분석한 결과 $65{\mu}m$ PDMS/DVB를 최적의 수착제로 선정하였다. 최적의 수착제로 $65{\mu}m$ PDMS/DVB 선정한 다음 순차적으로 다른 변수들을 확인하였다. 그 결과 BTEX와 PAHs 동시 분석하기 위한 최적의 SPMD 조건은 흡착시간 60분, 흡착온도 $50^{\circ}C$, 교반속도 750 rpm, GC 탈착시간 3분으로 결정되었다. 최적화한 HS-SPME-GC/MS 분석법을 이용하여 인공오염해수 내 유류계 방향족탄화수소 분석 결과 이전 연구 방법과 유사하였다. HP-SPME-GC/MS 분석법은 기존에 유기용매를 사용한 방법이 가졌던 단점과 제한점을 보완할 수 있으며, 해수 내 유류에 의한 BTEX 및 PAHs 분석에 효율적으로 적용할 수 있다.

SPME를 이용한 Geosmin과 2-MIB분석 시 잔류염소의 영향에 관한 연구 (Effect of Residual Chlorine on the Analysis of Geosmin and 2-MIB Using SPME (Solid Phase Microextraction))

  • 김성진;홍성호;민달기
    • 상하수도학회지
    • /
    • 제19권6호
    • /
    • pp.713-719
    • /
    • 2005
  • SPME (Soild phase microextraction) has been used in the analysis of many volatile organic compounds, such as geosmin and 2-methylisoborneol (2-MIB), trihalomethanes (THMs) in drinking water. SPME fiber is characterized by high adsorption capacity (DVB/CAR/PDMS, DVB/PDMS etc.). Although the highly active adsorption capacities of the SPME fiber are often to the chemical functional group, surface properties play a significant role in determining the surface adsorption capacities. The objectives of this study were to evaluate effect of residual chlorine on analysis of geosmin and 2-MIB. Image taken by SEM before preloaded with chlorine, the surface and porous media was almost perfect spherical shape and no clogging of pores. However, after preloaded with chlorine the surface was aggregated and pore was blocked. The recovery rate of geosmin and 2-MIB coexisting with chlorine was reduced by 35 to 62%. The recovery rate with preloaded with chlorine was reduced by 25 to 43%. The lower concentration of geosmin and 2-MIB and the higher concentration of chlorine existed in water, the lower the recovery rate was.

추출방법에 따른 잎담배 종류별 휘발성 향기성분 특성비교 (Comparison of the volatile flavor compounds in different tobacco types by different extraction methods)

  • 이장미;이정민;이창국;복진영;황건중
    • 한국연초학회지
    • /
    • 제32권2호
    • /
    • pp.77-87
    • /
    • 2010
  • Traditional simultaneous distillation extraction(SDE) and solid-phase micro extraction(SPME) methods using GC/MS were compared for their effectiveness in the extraction of volatile flavor compounds from different tobacco leaves types(flue-cured, burley, oriental). The major volatile flavor compounds of flue-cured and burley tobacco were similar such as neophytadiene, solanone, megastigmatrienone isomers, ${\beta}$-damascenone and ${\beta}$-ionone. On the other hand, volatile flavor compounds such as norambreinolide, sclareolide were specifically identified in oriental tobacco. Each method was used to evaluate the responses of some analytes from real samples and standards in order to provide sensitivity comparisons between two techniques. Among three types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate) and PDMS/DVB (Polydimethylsiloxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency, PDMS/DVB fiber was selected for the extractions of the volatile flavor compounds due to its effectiveness. The qualitative analysis showed that the total amount of volatile flavor compounds in SDE method(130 species) was much more than that in SPME method(85 species). SPME method was more efficient for all the highly volatile compounds than SDE method, but on the other hand, low-volatile compounds such as fatty acids or high-molecular hydrocabons were detected in SDE method. SPME method based on a short-time sampling can be adjusted to favor a selected group compounds in tobacco. Furthermore this results could be used to estimate the aroma characteristics of cigarette blending by using a different type of tobacco with more effectiveness and convenience.

Optimization of Headspace Sampling Using Solid Phase Microextraction For Volatile Organic Acids in Different Tobacco Types

  • Lee, Jang-Mi;Lee, Jeong-Min;Son, Seong-Ae;Kwon, Young-Ju;Jang, Gi-Chui;Kim, Young-Ho
    • 한국연초학회지
    • /
    • 제35권1호
    • /
    • pp.7-12
    • /
    • 2013
  • A Solid-phase micro extraction(SPME) was evaluated as a tool for headspace sampling of tobacco samples. Several experimental parameters (sampling temperature, pH, and type of SPME fibers) were optimized to improve sampling efficiency in two aspects ; maximum adsorption and selective adsorption of volatile organic acids onto SPME fibers. Among four types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate), Car/PDMS (Carboxen/Polydimethylsiioxane) and PDMS/DVB(Polydimethylsiioxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency. A variety of tobacco samples such as flue cured, burley and oriental were used in this study. The effect of these parameters was often dominated by the physical and chemical nature (volatility, polarity) of target compounds. This method allowed us to make important improvements in selectivity and sensitivity. The Car/PDMS fiber was shown to be the most efficient at extracting the 10 selected volatile organic acids. The parameters were optimized: $80^{\circ}C$ adsorption temperature, 30 min of adsorption time, $240^{\circ}C$ desorption temperature, 1 min of adsorption time.

Headspace solid-phase microextraction(HS-SPME)를 이용한 간의 비린내불쾌취에 기인하는 불포화지방산 산화생성물의 휘발성성분 (Volatile Compounds in the Oxidation of Unsaturated Fatty Acids Caused in Off-flavor of Porcine Liver by HS-SPME)

  • 임성임;최성희
    • 한국식품과학회지
    • /
    • 제35권3호
    • /
    • pp.359-365
    • /
    • 2003
  • 간 및 간에 함유된 불포화지방산인 arachidonic, linolenic, linoleic 및 oleic acid의 철 이온 존재하에서의 headspace 산화 반응생성물을 SPME법을 이용하여 포집, 분석하는 것에 의해 간에 함유된 불포화지방산의 산화생성물과 간의 비린내 불쾌취 형성과의 관련성을 검토하였다. SPME fiber중 불포화지방산의 headspace 산화생성물인 휘발성 알데히드류, 알코올류 및 지방산 등 대다수의 화합물을 검출에는 PDMS/DVB fiber가 적합하였다. 간의 headspace 산화생성물은 arachdonic acid을 비롯한 간에 함유된 각 불포화지방산의 head-space 산화생성물과 일치하였으며, 간의 불쾌취 형성은 간에 함유된 불포화지방산의 산화로 생성되는 산화 반응생성물에 의한 것이 시사되었다. 간의 불쾌취를 형성하는 주요성분으로는, arachidonic acid에서 생성되어 간의 금속취를 형성하는 화합물로 생각되어지는 1-octen-3-one 및 hexanol과 linolenic acid에서 형성되어 간의 비린내를 형성하는 (E,E)-2,4-heptadienal이 그 원인물질인 것으로 사료된다. 산화에 의해 생성된 각 불포화지방산의 산화 반응생성물은 간의 불쾌취인 비린내, 금속취 등을 생성하며, 주로 arachidonic acid 및 linolenic acid의 산화에 의해 생성된 산화 반응생성물에 의한 것으로 밝혀졌다.

Analysis of Agrochemical Residues in Tobacco Using Solid Phase Microextraction-Gas Chromatography with Different Mass Spectrometric Techniques

  • Lee, Jeong-Min;Jang, Gi-Chul;Kim, Hyo-Keun;Hwang, Geon-Joong
    • 한국연초학회지
    • /
    • 제30권2호
    • /
    • pp.117-124
    • /
    • 2008
  • A solid phase microextraction (SPME) method in combination with gas chromatography/mass spectrometric techniques was used for the extraction and quantification of 12 selected agrochemical residues in tobacco. The parameters such as the type of SPME fiber, adsorption/desorption time and the extraction temperature affecting the precision and accuracy of the SPME method were investigated and optimized. Among three types of fibers investigated, polyacrylate (PA), polydimethylsiloxane (PDMS) and polydimethylsiloxane-divinylbenzene (PDMS-DVB), PDMS fiber was selected for the extractions of the agrochemicals. The SPME device was automated and on-line coupled to a gas chromatograph with a mass spectrometer. Mass spectrometry (MS) was used and two different instruments, a quadrupole MS and triple quadrupole MS-MS mode, were compared. The performances of the two GC-MS instruments were comparable in terms of linearity (in the range of 0.01$\sim$0.5 $\mu$g/mL) and sensitivity (limits of detection were in the low ng/mL range). The triple quadrupole MS-MS instrument gave better precision than that of quadrupole MS system, but generally the relative standard deviations for replicates were acceptable for both instruments (< 15%). The LODs was fully satisfied the requirements of the CORESTA GRL. Recoveries of 12 selected agrochemicals in tobacco yielded more than 80% and reproducibility was found to be better than 10% RSD so that SPME procedure could be applied to the quantitative analysis of agrochemical residues in tobacco.