• Structural Engineering and Mechanics
• /
• v.43 no.2
• /
• pp.163-177
• /
• 2012

This paper presents a LMI(linear matrix inequality)-based fuzzy approach of modeling and active vibration control of geometrically nonlinear flexible plates with piezoelectric materials as actuators and sensors. The large-amplitude vibration characteristics and dynamic partial differential equation of a piezoelectric flexible rectangular thin plate structure are obtained by using generalized Fourier series and numerical integral. Takagi-Sugeno (T-S) fuzzy model is employed to approximate the nonlinear structural system, which combines the fuzzy inference rule with the local linear state space model. A robust fuzzy dynamic output feedback control law based on the T-S fuzzy model is designed by the parallel distributed compensation (PDC) technique, and stability analysis and disturbance rejection problems are guaranteed by LMI method. The simulation result shows that the fuzzy dynamic output feedback controller based on a two-rule T-S fuzzy model performs well, and the vibration of plate structure with geometrical nonlinearity is suppressed, which is less complex in computation and can be practically implemented.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.931-934
• /
• 2000

움직임 추정 및 보상을 위한 방법 중 가장 많이 사용하는 블록 정합 방법은 어떤 평가 함수와 탐색방법(Search Procedure)을 사용했느냐에 따라 그 성능이 달라지게 된다. 본 논문에서는 평가 함수로써 평균 제곱 오차(Mean Squared Error; MSE), 평균 절대값 오차(Mean Absolute Error; MAE), 화소 차분류(Pel Difference Classification: PDC)을, 탐색 방법으로써 전체 탐색 방법(Full Search Method : FSM), 3단계 탐색 방법(Three Step Search : TSS), 대각 탐색 방법(Cross Search Algorithm ;CSA)을 사용하여 이들의 성능을 각각 비교 분석하여 봄으로써 블록 정합 방법을 이용한 움직임 추정에 대한 전반적인 이해를 도모하고자 한다.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1812-1824
• /
• 2016

The neural dynamics underlying the causal network during motor planning or imagery in the human brain are not well understood. The lack of signal processing tools suitable for the analysis of nonlinear and nonstationary electroencephalographic (EEG) hinders such analyses. In this study, noise-assisted multivariate empirical mode decomposition (NA-MEMD) is used to estimate the causal inference in the frequency domain, i.e., partial directed coherence (PDC). Natural and intrinsic oscillations corresponding to the motor imagery tasks can be extracted due to the data-driven approach of NA-MEMD, which does not employ predefined basis functions. Simulations based on synthetic data with a time delay between two signals demonstrated that NA-MEMD was the optimal method for estimating the delay between two signals. Furthermore, classification analysis of the motor imagery responses of 29 subjects revealed that NA-MEMD is a prerequisite process for estimating the causal network across multichannel EEG data during mental tasks.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2043-2050
• /
• 2009

2′-$\beta$-C-Methylneplanocin A (3) was synthesized via 2-$\beta$-C-methylribonolactone, prepared by a modified Whistler and BeMiller’s method developed by our laboratory, as potential anti-HCV agent. Reduction of 14 with Dibal-H afforded 26 in a good yield with a trace of 25, whereas a Luche reduction gave 26/25 = 4/1 mixture. Several attempts were made to chemoselectively remove TBS group in the presence of TBDPS group and treatment with both PPTS and TsOH showed the best result. Condensation of 26 with 6-chloropurine under Mitsunobu conditions produced an $S_N$2 product 27 along with an $S_N$2′ product 28.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.2
• /
• pp.152-160
• /
• 2000

This paper addresses the analysis and design of fuzzy-model-based controller for nonlinear systems using extended PDC and optimal pole-placement schemes. In the design procedure, we represent the nonlinear system using a Takagi-Sugeno fkzy model and formulate the controller rules by using the extended parallel distributed compensator (EPDC) and construct an overall fuzzy logic controller by blending all local state feedback controllers with an optimal pole-placement scheme. Unlike the commonly used parallel distributed compensation technique, by blending a newly extended parallel distributed compensator and the optimal poleplacement schemes, we can design not only a local stable k z y controller but also an overall stable fuzzy controller to perform the tacking control objective. Furthermore, a stability analysis is carried out not only for the fuzzy model but also for a real nonlinear system. Finally. the effectiveness and feasibility of the proposed fizzy model-based controller design method has been shown through a simulation example.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.260-266
• /
• 2022

Cellulose fiber is a material used in various fields. It is the most used type of fiber because of its excellent hygroscopicity and dyeability. Recently, as natural fiber materials have been highlighted due to the influence of eco-friendliness and well-being, bamboo fiber has become a commonly used eco-friendly fiber. Cellulose fibers are part of the -OH hydroxyl group, which means they are more chemically reactive than synthetic fibers. In this study, the cationization properties of bamboo-cotton blended fabrics cationized using CHPTAC (3-chloro-2-hydroxypropyl trimethyl ammonium chloride) in the PDC (padding-drying-curing) method were investigated. Various characteristics according to cationization were studied through elemental analysis, FT-IR (fourier-transform infrared spectroscopy) analysis, X-ray diffraction analysis, TGA (thermogravimetric) analysis, and SEM (scanning electron microscope) analysis. The nitrogen content of the cationized bamboo-cotton blended fabric increased with an increase in the concentration of the cationizing agent CHPTAC, and it was seen to be highly bound to cellulose molecules. As a result of the FT-IR analysis, both 100% pure cotton fabrics and CHPTAC-0 and CHPTAC-150 fabrics were seen to be typical cellulose. As a result of the X-ray diffraction analysis, both 100% pure cotton fabrics and CHPTAC-0 and CHPTAC-150 fabrics showed typical cellulose I structures. As a result of the X-ray diffraction analysis, both 100% pure cotton fabrics and CHPTAC-0 and CHPTAC-150 fabrics showed typical cellulose I structures. As the cationization progressed, micropores appeared on the surface of the blended fabric.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.132-132
• /
• 2022

The application of direct seeding cultivation reduces time, labor, and cost. However, this application often has poor seedling establishment and leads to lower yield as compared to transplanting system. The tolerance to anaerobic and low temperature germination is important to improve seedling establishment and the wide-spread application of direct seeding method. This study was carried out to evaluate the responses of three japonica cultivars to different temperatures (15℃, 18℃, 21℃, 24℃, and 27℃) and different flooding levels (1 cm, 4 cm, 7 cm, 10 cm) during germination and seedling development. The mean survival percentage significantly increased (P<0.05) when the flooding level decreased and when temperature increased. There were significant effects of the interaction between temperature and water depth on survival percentage and seedling height. When temperature decreased from 27℃ to 15℃, the germination duration significantly increased from 6.4 days to 16.3 days while the germination speed, survival percentage, and seedling height decreased from 5.3 seeds day^-1, 61.9% and 190.6 cm to 2.2 seeds day^-1, 33.2%, and 47 cm, respectively. The increase in temperature under submergence condition was associated with the increased expression of Amy3D and ALDH2a but the decreased expression of ADH1 and PDC1. The results of this research would be used for further studies and breeding programs to improve rice seedling establishment and the application of direct seeding cultivation.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.