• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1375-1384
• /
• 2014

Flashover of power transmission line insulators is a major threat to the reliable operation of power system. This paper deals with the flashover prediction of polymeric insulators used in power transmission line applications using the novel condition monitoring technique developed by PD signal time-frequency map and neural network technique. Laboratory experiments on polymeric insulators were carried out as per IEC 60507 under AC voltage, at different humidity and contamination levels using NaCl as a contaminant. Partial discharge signals were acquired using advanced ultra wide band detection system. Salient features from the Time-Frequency map and PRPD pattern at different pollution levels were extracted. The flashover prediction of polymeric insulators was automated using artificial neural network (ANN) with back propagation algorithm (BPA). From the results, it can be speculated that PD signal feature extraction along with back propagation classification is a well suited technique to predict flashover of polymeric insulators.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1511-1512
• /
• 2006

In this paper, we measured PD signals from artificial surface defects and corona discharges under laboratory circumstances like the fields using both HFCT-sensor and UHF-sensor for MV grade XLPE cable with AMP, spectrum analyzer and oscilloscope. Also, detected signals were analyzed via PRPDA system in this paper. As a result, in this case of HFCT-sensor, the amount of background noise are larger than as compared to UHF-sensor. There is needed some hardware or software or software algorithm removing background noise effectively for diagnosis the underground power transmission cable in the case of HFCT-sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1888-1890
• /
• 2003

본 논문에서는 XLPE 고체 절연체내의 부분방전(partical discharge:PD)발생 및 진전에 따른 라 방사되는 UHF 대역의 방사전자파를 측정, 분석하고 PD진전에 따른 그 스펙트럼의 특성을 연구 하였다. PD를 모의하기 위해 침을 XLPE 절연체내에 삽입하고 그 사이에 보이드층을 만들었다. 고체절연체의 열화를 고려하여 일정시간 동안 일정 전압을 유지하고 이때 발생되는 방사전자파를 EMI, EMC 안테나(EMCO-3142)와 Spectrum analyzer로 측정, 분석하였다.

• 한국환경과학회지
• /
• 제26권7호
• /
• pp.859-868
• /
• 2017

In this study, the reductive dechlorination of triclosan using zero-valent iron (ZVI, $Fe^0$) and modified zero-valent iron (i.e., acid-washed iron (Aw/Fe) and palladium-coated iron (Pd/Fe)) was experimentally investigated, and the reduction characteristics were evaluated by analyzing the reaction kinetics. Triclosan could be reductively decomposed using zero-valent iron. The degradation rates of triclosan were about 50% and 67% when $Fe^0$ and Aw/Fe were used as reductants, respectively, after 8 h of reaction. For the Pd/Fe system, the degradation rate was about 57% after 1 h of reaction. Thus, Pd/Fe exhibited remarkable performance in the reductive degradation of triclosan. Several dechlorinated intermediates were predicted by GC-MS spectrum, and 2-phenoxyphenol was detected as the by-product of the decomposition reaction of triclosan, indicating that reductive dechlorination occurred continuously. As the reaction proceeded, the pH of the solution increased steadily; the pH increase for the Pd/Fe system was smaller than that for the $Fe^0$ and Aw/Fe system. Further, zero-order, first-order, and second-order kinetic models were used to analyze the reaction kinetics. The first-order kinetic model was found to be the best with good correlation for the $Fe^0$ and Aw/Fe system. However, for the Pd/Fe system, the experimental data were evaluated to be well fitted to the second-order kinetic model. The reaction rate constants (k) were in the order of Pd/Fe > Aw/Fe > $Fe^0$, with the rate constant of Pd/Fe being much higher than that of the other two reductants.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.

• 대한화학회지
• /
• 제34권6호
• /
• pp.593-599
• /
• 1990

새로운 평면사각형 혼합 리간드 착물을 합성하였다. 중심금속은 Ni(Ⅱ), Pd(Ⅱ) 및 Pt(Ⅱ)이며 리간드는 dithiolene과 diimine이다. 이들 착물의 리간드 치환기의 변화에 따른 전자 스펙트럼의 관찰로부터 가시선 영역의 매우 강한 흡수띠는 HOMO에서 LUMO로의 전이에 의한 것이며 dithiolene에서 diimine리간드로의 전하이동 전이에 해당된다. 여러 가지 용매계에서 이 전이는 Hush 이론을 따르는 혼합원자가 이핵착물의 원자가간 전이와 유사한 거동을 보이며, 내부배위권을 통한 전하이동 전이가 우세하게 일어난다. 음의 용매화 발색현상으로부터 전자전이에 의해 착물의 들뜬상태의 쌍극자가 감소 또는 반전되어 있음을 알 수 있다.

• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.268-275
• /
• 2024

The study examined the electrogeneration of hypochlorite ions (ClO^-) via electrolysis of aqueous NaCl solutions using a dimensionally stable anode-type (DSA-type) electrode based on platinum and palladium oxides supported on titanium mesh (Ti/PtPd(10%)O_x). The electrogenerated ClO^- was quantified on the basis of the absorption band at 292 nm (A_λ = 292) of the UV-Vis spectrum. The effect of initial pH, concentration of NaCl, cell potential difference and electrolysis time were investigated in this study. The results showed that the electrolysis of aqueous NaCl solutions increases the solution pH up to high values (≥ 8.0) that favor the formation of ClO^- over chlorine or hypochlorous acid. The hypochlorite concentration increases significantly at pH values > 7.0 and shows a linear trend with increasing NaCl concentration and with increasing cell potential difference. When the cell potential and NaCl concentration are held constant, the maximum hypochlorite value during electrolysis depends on both the cell potential and NaCl concentration. The Ti/PtPd(10%)O_x anode favors the production of hypochlorite ions, making this anode a promising material for use in electrochemical oxidation of wastewater via an indirect mechanism.

• 한국정보통신학회논문지
• /
• 제15권2호
• /
• pp.307-314
• /
• 2011

인지통신(cognitive radio)과 같이 가변 스펙트럼 할당이 필요한 시스템을 위한 새로운 전치왜곡기를 제안한다. 본 논문에서 고려하는 시스템 모델에서 신호는 한 순간에는 작은 대역폭을 차지하지만 그 중심 주파수가 시간에 따라 변화할 수 있는 상황을 가정한다. 이러한 시나리오에서는 전력 증폭기 출력 단에 위치하는 종단 필터로는 전력증폭기에 의한 하모닉을 제거하지 못하는 상황이 발생할 수 있다. 제안된 전치왜곡기는 기본 주파수 (${\omega}_0$) 신호의 비선형 왜곡을 선형화할 뿐만 아니라, $2{\omega}_0$, $3{\omega}_0$, ...에서 발생하는 하모닉도 동시에 제거한다. 제안된 전치왜곡기는 ${\omega}_0$ 주파수의 정수배에 대응하는 여러 개의 전치왜곡기가 결합된 구조를 가지고 있다. 기본 주파수 ${\omega}_0$에 해당하는 전치왜곡기는 기본 주파수 신호의 선형화를 담당하며, 나머지 주파수에 대응하는 전치왜곡기는 하모닉을 제거하는 역할을 담당한다. 제안된 전치왜곡기에서 필요한 변수는 최소 평균 자승 에러 알고리즘에 의해 동시에 계산되며, 모의실험 결과에 따르면 제안된 방법을 이용하면 기본 주파수의 스펙트럼에 발생하는 스펙트럼 왜곡이 20dB 감소하며, 2차 및 3차 하모닉도 기본 신호의 전력대비 약 -70dB로 작아지는 것을 확인할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권4호
• /
• pp.1837-1860
• /
• 2020

We propose a general framework for studying resource allocation problem and the tradeoff between spectral efficiency (SE) and energy efficiency (EE) for downlink traffic in power domain-non-orthogonal multiple access (PD-NOMA) and device to device (D2D) based heterogeneous cloud radio access networks (H-CRANs) under imperfect channel state information (CSI). The aim is jointly optimize radio remote head (RRH) selection, spectrum allocation and power control, which is formulated as a multi-objective optimization (MOO) problem that can be solved with weighted Tchebycheff method. We propose a low-complexity algorithm to solve user association, spectrum allocation and power coordination separately. We first compute the CSI for RRHs. Then we study allocating the cell users (CUs) and D2D groups to different subchannels by constructing a bipartite graph and Hungrarian algorithm. To solve the power control and EE-SE tradeoff problems, we decompose the target function into two subproblems. Then, we utilize successive convex program approach to lower the computational complexity. Moreover, we use Lagrangian method and KKT conditions to find the global optimum with low complexity, and get a fast convergence by subgradient method. Numerical simulation results demonstrate that by using PD-NOMA technique and H-CRAN with D2D communications, the system gets good EE-SE tradeoff performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.842-846
• /
• 1997

Micro-hole drilling (holes less than 0.5 mm in diameter with aspect ratios larger than 10) is gaining increased attention in a wide spectrum of precision production industries. Alternative methods such as EDM, laser drilling, etc. can sometimes replace mechanical micro-hole drilling but are not acceptable in PCB manufacture because they yield inferior hole quality and accuracy. The major difficulties in micro-hold drilling are related to wandering motions during the inlet stage, high aspect ratios, high temperature,etc. However, of all the difficulties, the most undesirable one is the increase of drilling force as the drill penetrates deeper into hold. This is caused mainly by chip related effects. Peck-drilling is thus widely used for deep hole drilling despite the fact that it leads to low productivity. Therefore, in this paper, a method of cutting force regulation is proposed to achieve continuous drilling. A proportional plus derivative (PD) and a sliding modecontrol algorithm will be implemented for controlling the spinle rotational frequeency. Experimental results will show that sliding mode control reduces the nominal cutting force and its variation better than the PD control, resulting in a number of advantages such as an increase in drill life, fast stabilization of the wandering motion, and precise positioning of the hole.