• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1E
• /
• pp.11-16
• /
• 2008

In this paper, a pitch cycle waveform (PCW) is extracted, quantized, and interpolated in a time domain to synthesize high-quality speech at low bit rates. The pre-alignment technique is proposed for the accurate and efficient PCW extraction, which predicts the current PCW position from the previous PCW position assuming that pitch periods evolve slowly. Since the pitch periods are different frame by frame, the original PCW is converted into the fixed-dimension PCW using the dimension-conversion method, and subsequently quantized by code-excited linear predictive (CELP) coding. The excitation signal for the linear predictive coding (LPC) synthesis filter is generated using the time-domain interpolation and interlink of the quantized PCW's. The coder operates at 4.2 kbit/s and 3.2 kbit/s depending on the pitch period. Informal listening test demonstrates the effectiveness of the proposed coding scheme.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.04a
• /
• pp.1-7
• /
• 2002

This papers describes the preparation and experimental results of a micro mass detection devices based on cantilever and a diffuser-type micro pump using screen printing thick-film technologies and Si micro-machining. PZT-PCW thick films were prepared by new hybrid method based on the screen printing. By applying these PZT-PCW piezoelectric thick films on actuator, a cantilever for mass detection sensor and a micropump for microfluidic element are successfully fabricated. Resonant frequency and displacement of PZT-PCW thick film actuator in air and in liquid are measured by laser vibrometer system as a function of actuator size. The resonant frequency of PZT-PCW thick film actuator in liquid decreases order of 1/2-1/4 due to damping effect. The sensitivity of cantilever is characterized by Au deposition method which has the mass loading effect such as adsorption of protein. The Sensitivity of PZT-0.12PCW thick film cantilever is proportional to detecting area.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.51-53
• /
• 2005

This study was to measure the minuteness structure, dielectric properties of 0.03PCW-0.07PNN-0.9PZT ceramics according to sintering temperature manufacture the specimens with a general method. The results of this study were gotten such as follows. The crystal structure of ceramic changed the rombohedral structure into teteragonal structure according to rising sintering temperature in XRD. Dielectric constant at $20^{\circ}C$ showed its maximum value 510.599 in specimens sintered at $1100^{\circ}C$ and dielectric loss showed its minimum value 7.43% in specimens sintered at $1100^{\circ}C$. The variation rate of dielectric constant according to the change of frequency showed its minimum value 0.029/kHz at $1100^{\circ}C$. The variation rate of dielectric constant according to the change of temperature showed its minimum value $1.40/^{\circ}C$ at $1500^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1988-1990
• /
• 2002

마이크로 바이오칩용 미세 무게 감지 소자를 개발하기 위해 통상적인 MEMS 공정에 PZT sol solution을 함침하여 binder로서 적용하는 복합적인 스크린 인쇄 방법을 적용해 $800-850^{\circ}C}$의 비교적 저온에서 높은 소결밀도와 우수한 전기적인 특성을 가지는 PZT-0.12PCW 후막 구동형 캔틸레버 소자를 Pt/$TiO_2$/YSZ/$SiO_2$/Si 기판에 제조하였다. 제조된 PZT-0.12PCW 후막 구동형 캔틸레버 소자의 공진 주파수와 변위를 레이저 미소 변위 측정 시스템을 이용하여 공기 중 및 액체 중에서 측정함으로써 캔틸레버 크기에 따른 공진 특성 변화, 액체 내에서의 댐핑 효과 등을 분석할 수 있었다. 또한 Au를 증착하거나biotin-streptoavidin 반응을 통해 단백질을 고정화시켜 무게변화를 야기시킨 후 소자의 감도를 평가함으로써 PZT-0.12PCW 후막 구동형 캔틸레버를 우수한 성능의 바이오칩용 미세 무게 감지 소자로 응용할 수 있음을 알 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.69-70
• /
• 2006

Air-guided single-mode propagation of THz radiation in a photonic crystal waveguide (PCW) has been experimentally demonstrated for the first time. The PCW has been fabricated by introducing an air defect at the center of an air/Si 1D photonic crystal. By using a THz time-domain spectroscopic technique, we have experimentally shown that the guiding mechanism of the air-guiding PCW is the photonic bandgap effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.453-457
• /
• 2008

In this thesis, piezoelectric properties and sintering properties of PCW-PNN-PZT+0.5 wt%$MnO_2$ ceramics adding $B_2O_3$ after creating the specimens with a general method. The lattice constant from the analysis of crystal structure showed that the crystal structure of ceramic features both rhombohdral and tetragonal structures and that the pychlore structure was decreased with the increase of the sintering temperature. The electromechanical coupling coefficient showed its maximum of 31 % in the sintered specimens at $1050^{\circ}C$, and its minimum of 20 % in the sintered specimens at $1150^{\circ}C$. The mechanical quality coefficient marked the maximum of 139 at the sintering temperature of $1150^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.335-336
• /
• 2006

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.136-141
• /
• 2005

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, PCW-PMN-PZT ceramics using Li$_2$CO$_3$, Bi$_2$O$_3$, and CuO as sintering aids were manufactured according to the amount of MnO$_2$ addition. Their microstructural, dielectric and piezoelectric properties were investigated. When the sintering aids were added, specimens could be sintered below 95$0^{\circ}C$, but mechanical qualify factor decreased. Therefore, MnO$_2$ was added excessively to the PCW-PMN-PZT ceramics to increase mechanical quality factor. At the sintering temperature of 95$0^{\circ}C$, the density, dielectric constant($\varepsilon$$_{r}$), electromechanical coupling factor(k$_{p}$), mechanical quality factor(Q$_{m}$) and Curie temperature(T$_{c}$) of 0.1 wt% MnO$_2$ added specimen showed the optimal values of 7.75 g/㎤, 1503, 0.57, 1502, and 337, respectively, for multilayer piezoelectric transformer application.ation.n.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.798-801
• /
• 2004

In this study, in order to develop low temperature sintering ultrasonic vibrator, PCW-PMN-PZT ceramics with the amount of $Nb_2O_5$ addition were manufactured. All of the fabricated sample showed pure pervoskite structure of tetragonal phase. With increasing the amount of $Nb_2O_5$ addition, mechanical quality factor Qm were increased up to 0.2wt%$Nb_2O_5$ addition and then decreased. And also, with increasing the amount of $Nb_2O_5$ addition, grain size, kp, density and dielectric constant were linearly decreased. At the 0.2wt% $Nb_2O_5$ addition composition ceramic, kp of 0.48, Qm of 2186, ${\varepsilon}r$ of 1219 were shown, respectively. Their values were suitable for ultrasonic vibrator application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.350-356
• /
• 2006

In this study, piezoelectric transformer was manufactured at the sintering temperature of $950^{\circ}C$, and then the feasibility of application to low temperature sintering piezoelectric transformers was investigated by evaluating the electrical characteristics of it. The voltage ratio of piezoelectric transformer showed the maximum value at the resonant frequency of input part, and increased according to the increase of load resistance. The output power and efficiency of piezoelectric transformer showed the superior properties when the output impedance of it coincides with the load resistance. Piezoelectric transformer manufactured at the low temperature of $950^{\circ}C$ showed the heat generation less than $20^{\circ}C$ at the output power of 30 W, and stable driving characteristics.