• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.4
• /
• pp.57-66
• /
• 2013

Domestic PCB industry formed by orders of demand companies is extremely vulnerable in its innovation infrastructure including high value-added technology development and information exchange. The majority of PCB products produced in the country relies on the imports from abroad and it causes its vulnerability to external market changes. Due to the negative perceptions about the industry (e.g., 3D job), low treatment (especially SMEs) and expertise employment avoidance in PCB industry, the job market conditions of PCB industry is not so good. In these circumstances, the PCB industry is completely dependent on the demand market such as cellular phones, and tablet PC, and as a result the responsiveness of PCB industry to the changes in demand market is also vulnerable. In this PCB industry, Korean government is trying to build the research infrastructure for PCB industry that realizes the sharing of information among companiesthrough the operation of the PCB industry innovation forum (information innovation), builds SME suppot platform and supports quality improvement (technology innovation), and supports enterprise collaboration processes (material-process-equipment) utilizing PCM open laboratory. The PCB industry technology infratstructure project is going to be promoted by the government(1.3 billion won, each year) and the private investmen(434 million won each year) from 2013 to 2017(5 years project)(table 1). This study analyzes the feasibility of the project, by using the AHP analysis and the results shows that this project is considered feasible because the AHP overall score is evaluated as 0.841, the overall score is greater than or equal to 0.55.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.67-74
• /
• 2001

According as the patterns of PCB (Printed Circuit Board) become denser and complicated, quality and accuracy of PCB influence the performance of final product. It's attempted to obtain trust of 100% about all of parts. Because human inspection in mass-production manufacturing facilities are both time-consuming and very expensive, the automation of visual inspection has been attempted for many years. Thus, automatic visual inspection of PCB is required. In this paper, we used an algorithm which compares the reference PCB patterns and the input PCB patterns are separated an object and a scene by filtering and edge detection. And than compare two image using pattern matching algorithm. We suggest an defect inspection algorithm in PCB pattern, to be satisfied low cost, high speed, high performance and flexibility on the basis of $640{\times}480$ binary pattern.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.288-289
• /
• 2012

이동통신, 전자부품의 고속송신에 따라 핵심으로 사용되는 인쇄회로기판(PCB, Printed Circuit Board)의 신뢰성을 향상시키기 위한 주석도금기술과 품질 향상이 요구되고 있다. 오랜 역사를 갖고 있는 습식전자부품 주석도금기술은 과거의 현장에서 기본원리, 도금액분석 등을 이수하는 정도였다. 최근 도금뿌리산업육성과 함께 PCB주석도금 신기술정보를 입수하여 현장품질기술지원이 필요하다. 이에 수시로 업그레이드되고 변화하고 있는 해외신기술동향과 특허정보를 지원하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1720-1721
• /
• 2008

인간에게 있어서 시각 능력이란 정보 취득 및 처리 과정에 있어서 중요한 역할을 한다. 이러한 능력은 기계에 있어서도 자동화가 진전이 될수록 기계의 시각 능력 즉, 머신 비전의 기술이 중요한 역할을 한다. 따라서 산업이 발전함에 따라 머신 비전의 기술은 여러 분야에 걸쳐 요구되며, 이에 따른 연구가 활발히 진행되고 있다. 본 연구에서도 산업 현장에 적용 할 수 있는 최적의 머신 비전 시스템 설계를 목적으로 하였으며, 그에 따른 PCB기판 검사 시스템에 대하여 연구하였다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.12
• /
• pp.1533-1540
• /
• 2001

In this paper, we described extraction method of electrical parameters and modeling method of PCB nets on PCB design process. To analyze electrical characteristics of real PCB structure, we selected a cache memory system as an experimental board and designed 6 layer PCB substrate. For extraction of the electrical parameters, we divided circuit elements into the components of conductor types which are wires, via holes, BGA balls etc. and combined the calculated value by real net structure to modeling the PCB nets. We analyzed the electrical characteristics of the PCB nets with the simulation tools of SPICE and XNS. The simulation analysis has shown that the maximum signal delay was 2.6ns and the maximum crosstalk noise was 281 mV and we found that the designed substrate was adequate to system specification.

• Journal of Radiation Industry
• /
• v.9 no.3
• /
• pp.153-159
• /
• 2015

Reliability of printed circuit board (PCB), which is based on high integrated circuit technology, is having been important because of development of electric and self-driving car. In order to answer these demand, automated X-ray inspection (AXI) is best solution for PCB non-destructive test. PCB is consist of plastic, copper, and, lead, which have low to high Z-number materials. By using dual energy X-ray imaging, these materials can be inspected accurately and efficiently. Dual energy X-ray imaging, that have the advantage of separating materials, however, need some solution such as energy separation method and enhancing efficiency because PCB has materials that has wide range of Z-number. In this work, we found out several things by analysis of X-ray energy spectrum. Separating between lead and combination of plastic and copper is only possible with energy range not dose. On the other hand, separating between plastic and copper is only with dose not energy range. Moreover the copper filter of high energy part of dual X-ray imaging and 50 kVp of low energy part of dual X-ray imaging is best for efficiency.

• The Safety technology
• /
• no.166
• /
• pp.18-19
• /
• 2011

1965년 국내 최초로 인쇄회로기판 전문 업체로 설립된 이래 40년이 넘게 외길을 걸어온 대덕GDS(주) 그동안 기술력과 선로를 바탕으로 꾸준히 성장해, 현재는 제1공장에서 일반 가전용 기판을 제2공장에서 산업용 기판을 집중 생산하고 있다. 또 최첨담 FPCB 생산라인을 구축해 국내에서는 유일하게 PCB 전 기종을 생산하는 종합PCB업체로 발전했다. 대덕지GDS(주)가 이처럼 성장할 수 있었던 데에는 품질향상과 기술개발에 힘을 쏟은 것도 있지만, 근간에는 남다른 안전관리가 있었기 때문이다. 한결같이 안전을 실천하고 있는 연재보 안전관리자를 찾아가 봤다.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.3-10
• /
• 2003

Copper oxychloride used as an agricultural fungicide has been recovered from copper-containing waste etchant by the neutralization with alkali hydroxides. Large amount of copper-containing waste etchant is generated from Printed Circuit Board industry. In an environmental and economic point of view, retrieve of the valuable natural resource from the waste is important. Recycling process of copper oxychloride from the waste etchant is discovered through the our study. In the range of reaction temp. 2$0^{\circ}C$-4$0^{\circ}C$, pH 5-7, pure copper oxychloride was able to prepare and the yield of copper oxychloride was higher than 95%. Physical properties of the sample have been characterized using SEM, XRD, TGA, ICP and Atomic absorption spectroscopy.

• Journal of Korean Electronics
• /
• v.1 no.11
• /
• pp.21-30
• /
• 1981

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.73-77
• /
• 1999

Revolutionary changes on multimedia, network and PDA(Personal digital assistants) causes PCB(Printed circuit beard) manufacturers to change their attitudes to product. Traditional idea for current market such as price, market, and service has collapsed down and new digitalization urges PCB manufacturers to deal with new technologies, shorter lead time with reasonable price, high qualities. Therefore PCB manufacturers have an effort to develop new marketing, products, processes for low cost to keep up pace with assembly makers.