• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.87-88
• /
• 2011

본 논문은 최근 빠른 속도로 성장하고 있는 신재생에너지 분야 중 태양광을 이용한 계통연계형 PV PCS의 PLL(Phase Locked Loop) 기법을 DSP로 처리할 수 있도록 디지털 논리회로로 구현하는 DPLL(Digital Phase Locked Loop) 기법을 제시하고 모델링과 시뮬레이션을 통하여 검증한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.86-88
• /
• 1996

A method is presented for the development of the PC-based measurement system on the 6 cathodes-single anode type multi-functional oxygen electrodes for detecting various components of the solution by measuring the dissolved oxygen(DO) concentration. The system is consisted with the 6 channel sensor signal modyfing circuits for the sensor and the PC interface circuits using the single chip microprocessor 80c196kc. Typical polarograms for the DO probes under test using this sensor circuits are presented. This system covers wide range of measuring time from 300sec to over 16 hour in one measurement step by programming the 9 monitor disply mode.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.2
• /
• pp.106-118
• /
• 1992

The landscape architecture construction cost estimation includes the repeated calculation and updating. Thus, it is time-consuming, and one of the jobs which needs to be automated first. In Korea, the IBM compatible personal computer(PC) is the most widely used one in the landscape architecture firms. However, the software for landscape architecture construction cost estimation is not being used in the PC environment. Therefore, the purpose of this study is to develop the software which can be used to automate the calculation for the landscape architecture construction cost estimation, and runs in the IBM compatible personal computers(PC). The clipper '88 summer is one of the DBMS software packages, and it has many commands and functions and functions which reduces program lines and makes the programing efficient, especially in the programing work whose total source code lines do not exceed over 10,000 lines. So, it was used in this study. The software developed in the this study was tested using the real data, and it was found that it can be efficiently used in the following jobs. They are: (1) to calculate exactly and rapidly. (2) to use resources repeatedly. (3) to print out the results. (4) to store data files for the future use. The software, as discussed in this paper, reduces the time and efforts to be spent in the calculation for the landscape architecture construction cost estimation compared with the traditional approach using the pocket calculator.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.83-88
• /
• 1995

In this paper, the solid modeller suitable for PC was developed for Top-down 3-D representation and analysis of fixed offshore structures. Also solid modelling and hidden line removal were conducted in order to visualize the offshore structures based on the scan line z-buffer algorithm.

• Journal of Chest Surgery
• /
• v.49 no.1
• /
• pp.29-34
• /
• 2016

Background: Pectus excavatum (PE) and pectus carinatum (PC) are the most common chest wall deformities. In this study, we aimed to characterize how patients obtained information about these deformities, as well as patients' family history, associated medical problems, and postoperative satisfaction after the Nuss and Abramson procedures. Methods: This cross-sectional retrospective study included patients who were operated by a single surgeon between 2006 and 2013. Follow-up calls were made after approval of our institution's ethics committee. We reached 207 of the 336 PE patients (61.6%) and 73 of the 96 PC patients (76%). Results: The majority of the patients were male (85% of the PE patients and 91.8% of the PC patients). The age of diagnosis of PE was $14.52{\pm}0.51years$ and the age at the time of operation was $17.89{\pm}0.42years$; for PC patients, the corresponding ages were $15.23{\pm}0.55years$ and $16.77{\pm}0.55years$, respectively. A total of 70% of the PE patients and 63.8% of the PC patients obtained information about pectus deformities through the Internet. In 27.1% of the PE patients with an associated anomaly, 57.1% (n=13) had scoliosis, while 41.1% of the PC patients with an associated anomaly had kyphosis (n=5). Postoperative satisfaction, as evaluated on a scale from 0 to 10, was $8.17{\pm}0.15$ for PE patients and $8.37{\pm}0.26$ for PC patients. The postoperative pain duration was $51.93{\pm}5.18days$ for PE patients and $38.5{\pm}6.88days$ for PC patients. Conclusion: In this study, we found that most patients with pectus deformities were male. The Internet was an important resource for patients to learn about their deformities. Family history and associated anomalies were identified as important aspects for consideration in the clinical setting. The patients reported high levels of postoperative satisfaction, and pain management was found to be one of the most important elements of postoperative care.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.16-23
• /
• 2016

The separation behaviour of Mo and W from sulfuric acid solution by solvent extraction with Alamine 336 was investigated as a function of solution pH and extractant concentration. Selective extraction of Mo over W by Alamine 336 was obtained in the pH range of 3-5 with low amine concentration. The mixture of Alamine 336 and acidic extractants improved the separation factor between Mo and W and was in the following order: D2EPHA > PC88A > Decanol > Versatic acid. The stripping efficiency of Mo and W from the loaded mixture of Alamine 336 and D2EHPA was very poor, while complete stripping of Mo and W was possible from the mixture of Alamine 336 and Decanol by using a mixture of $NH_4OH$ and $NH_4Cl$.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.55-63
• /
• 2020

In order to investigate the separation of Co(II) and Ni(II) by ionic liquids from weak hydrochloric acid solutions, extraction experiments were performed by changing the type and concentration of ionic liquids and the initial pH of the aqueous phase. Two kinds of ionic liquids based on Aliquat 336 were employed in this work; one was synthesized by reacting organophosphorus acids(D2EHPA, PC88A, Cyanex 272, Cyanex 301) with Aliquat 336 and the other was prepared by exchanging the chloride ion of Aliquat 336 with SCN^-. The three types of ionic liquids (ALi-D2, ALi-PC, and ALi-CY272) showed better extraction of Co(II) than Ni(II), and the equilibrium pH was higher than the initial pH. In the case of ALi-CY301, the selectivity of Co(II) and Ni(II) depended on the extraction conditions. In addition, the effect of the addition of TBP to the ionic liquid on the extraction of two metals was also investigated. Employment of ALi-SCN as an extractant resulted in selective extraction of Co(II) and complete separation of the two metal ions was possible.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.631-639
• /
• 2015

Extraction/separation of cobalt by solvent extraction is reviewed. Separation of cobalt using various reagents and also cobalt recovery from scrap using commercial extractant were analyzed. The separation ability for cobalt followed the order of phosphinic > phosphonic > phosphoric acid due to the increasing stabilization of tetrahedral coordination of cobalt complexes with the extractant in the organic phase. Depending upon the solution composition, commercial extractants like Cyanex 272, D2EPHA and PC 88A should primarily be used for commercial extraction processes and also the efficient management of their combination could address various separation issues associated with cobalt bearing scrap.

• 한국해양학회지
• /
• v.30 no.2
• /
• pp.69-76
• /
• 1995

A turbidite core sediment (RN88-PC5) from 2051 m on the deep-sea floor at the southern margin of Okinawa Trough was examined. Sedimentological characteristics were quite different between sandy sediments and hemipelagic sediments and hemipelagic sediments in terms of benthic foraminiferal assemblage, grain-size and chemical composition. All turbidite sandy sediments were clearly transported from shallow area as they include typical coral reef dwelling benthic foraminifera which were not found in the background hemipelagic sediments. These layers also suggest that the sediments were transported by turbidity-related currents and implies that sedimentological mechanisms were different between sandy sediments and hemipelagic sediments. The result of the /SUP 14/ C age dating and the stable oxygen isotopic fluctuation of planktonic foraminifera show a gradual warming trend of the surface water from about 10 Ka to present. Also Termination lb as well as two fresh water input events were recognized at ca2 and 7 ka.