• 제목/요약/키워드: PC substrate

검색결과 193건 처리시간 0.031초

PC 기판위에 성막한 IZO/Ag/IZO 박막의 특성과 이를 이용하여 제작한 플렉시블 유기발광다이오드의 특성 분석 (Characteristics of flexible IZO/Ag/IZO anode on PC substrate for flexible organic light emitting diodes)

  • 조성우;정진아;배정혁;문종민;최광혁;김한기
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.381-382
    • /
    • 2007
  • IZO/Ag/IZO (IAI) anode films for flexible organic light emitting diodes (OLEDs) were grown on PC (polycarbonate) substrate using DC sputter (IZO) and thermal evaporator (Ag) systems as a function of Ag thickness. To investigate electrical and optical properties of IAI stacked films, 4-point probe and UV/Vis spectrometer were used, respectively. From a IAI stacked film with 12nm-thick Ag, sheet resistance of $6.9\;{\Omega}/{\square}$ and transmittance of above 82 % at a range of 500-550 nm wavelength were obtained. In addition, structural and surface properties of IAI stacked films were analyzed by XRD (X-ray diffraction) and SEM (scanning electron microscopy), respectively. Moreover, IAI stacked films showed dramatically improved mechanical properties when subjected to bending both as a function of number of cycles to a fixed radius. Finally, OLEDs fabricated on both flexible IAI stacked anode and conventional ITO/Glass were fabricated and, J-V-L characteristics of those OLEDs were compared by Keithley 2400.

  • PDF

플라즈마 중합법에 의한 유기 감광체 박막의 제조와 광전도 특성 (Preparation and Photo Conducting Characteristics of Plasma Polymerized Organic Photorecepter)

  • 박구범
    • 전자공학회논문지T
    • /
    • 제36T권3호
    • /
    • pp.19-25
    • /
    • 1999
  • 플라즈마 중합법과 dip-coating법에 의해 이층형 유기 감광체를 제조하였다. 알루미늄 기판위에 장벽 층으로 Al₂O₃막을 만들었고, 전하 생성층으로 H₂ phthalocyanine(H₂Pc)를, 전하 수송층으로는 Poly 9-Vinylcarbazole을 채택하여 CGL/CTL의 이층 구조가 되도록 하였다. 플라즈마 중합법과 진공 증착법에 의해 각각 H₂ phthalocyanine 박막을 제조하여 흡광 특성을 검토한 결과 진공 증착막의 경우 613.6[nm]와 694.8[㎚]에서 흡수 피크가 관찰되었으나 플라즈마 중합막에서는 600-700[㎚]사이에서 완만한 피크가 관찰되었다. PVCz막의 표면전위는 인가한 코로나 방전 전압과 PVCz의 두께가 증가함에 따라 증가하였고, 암 감 쇠 특성과 광 감쇠 시간 그리고 잔류 시간도 PVCz의 두께의 증가와 함께 증가하였다. 15[㎛] 두께의 PVCz의 표면 전하량을 계산한 결과, 인가 전위 -600[V]에서 134[nc/㎠]이었으며 H₂Pc의 전하 생성 효율은 0.034이었다.

  • PDF

Inhibition of Tyrosine Hydroxylase by Palmatine

  • Lee, Myung-Koo;Zhang, Yong-He;Kim, Hack-Seang
    • Archives of Pharmacal Research
    • /
    • 제19권4호
    • /
    • pp.258-260
    • /
    • 1996
  • Palmatine, an protoberberine isoquinoline alkaloid, has been found to inhibit dopamine biosynthesis by reducing tyrosine hydroxylase (TH) activity in PC12 cells (Lee and Kim, 1996). We have therefore investigated the effects of palmatine on bovine adrenal TH. Palmatine showed a mild inhibition on bovine adrenal TH (36.4% inhibition at concentration of $200\muM$). Bovine adrenal TH was inhibited competitively by palmatine with a substrate L-tyrosine. The Ki value was found to be 0.67 mM. This result suggests that the inhibition of TH activity by palmatine may be partially involved in the reduction of dopamine biosynthesis in PC12 cells.

  • PDF

PC기판위에 이온빔 스퍼터로 증착된 $TiO_2$ 박막의 광학적 특성 (Optical Properties of $TiO_2$ Thin Films Deposited on Polycarbonate Substrate by Ion Beam Sputtering)

  • 박정민;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
    • /
    • pp.269-270
    • /
    • 2006
  • 이온빔 스퍼터를 사용하여 PC기판위에 $TiO_2$ 박막을 증착한 후 광학적 특성을 고찰하였다. 증착 전 어시스트 이온건을 사용하여 아르곤 플라즈마로 표면처리를 하였으며, Ti 박막을 $300{\AA}$정도로 증착한 다음, 그 위에 산소 반응스퍼터링 기법을 사용함으로써 $TiO_2$박막을 증착하였다. 표면처리에 의한 기판의 표면개질로 TI 버퍼층과의 막부착력을 높이고, 아르곤 산소의 분압비를 1로 고정하였을 때, $TiO_2$박막의 두께에 따라서 박막의 색상이 변화는 것을 관찰할 수 있었다. 또한, 아르곤과 산소의 분압 변화에 대한 의존성은 $TiO_2$박막의 색상과 투과율과 같은 광학적인 성질에 영향을 미치는 것을 알 수 있었다.

  • PDF

대향 타겟식 스퍼터링으로 증착한 ITO 박막의 Bending에 의한 특성 분석 (The investigation of ITO thin film prepared by Facing Targets Sputtering (FTS) by Bending)

  • 김상모;임유승;금민종;최명규;김경환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.438-439
    • /
    • 2007
  • In this study, we prepared ITO thin film on the polycarbonate(PC) substrate by using Facing Targets sputtering (FTS) system. After the external bending force was applied to as-deposited ITO thin films with fixed face-plate distance (L), we investigated how properties of those change. As a result, the crack density of films was increasing as bending frequency increased. In accordance with crack distribution, we observed that the resistivity value of ITO thin film increased.

  • PDF

연성기판에 증착한 투명전도막의 제작 (Preparation of thransparent conductive film using flexible substrates)

  • 조범진;금민종;김경환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
    • /
    • pp.39-40
    • /
    • 2006
  • We prepared ZnO:Al (AZO) thin films on polycarbonate (Pc) and polyethersulfon (PES). Because the polymer substrate has weak thermal resistance. The AZO thin films were deposited at room temperature by facing targets sputtering (FTS) method In the work, AZO thin films were deposited with different thickness in 1mTorr and $O_2$ gas flow rate 0.05. The electrical, optical and crystallographic properties were measured From the results, the resistivity of $7.3{\times}10^{-4}{\Omega}cm$ and transmittance of over 80% in visible range were obtained.

  • PDF

투명 폴리카보네이트 보호코팅을 위한 산화알루미늄 박막 (Al2O3 Coating on Transparent Polycarbonate Substrates for the Hard-coating Application)

  • 김훈;남경희;장동수;이정중
    • 한국표면공학회지
    • /
    • 제40권4호
    • /
    • pp.159-164
    • /
    • 2007
  • Transparent aluminum oxide films were deposited on polycarbonate (PC) substrates by inductively coupled plasma (ICP) assisted reactive sputtering. the oxygen flow rate was regulated by controlling the target voltage with a proportional integrate derivative controller. The PC substrate was treated with plasma prior to the deposition in order to the enhance the adhesive strength of the $Al_2O_3$ film. The characteristics of hardness, structure, density, transmittance, deposition rate, surface roughness and residual stress were investigated to estimate the possibility for the hard coating.

펄스도금법을 이용한 고내마모성 로듐 도금층 형성에 관한 연구 (Electroplating of High Wear Resistant Rhodium using Pulse Current Plating Method)

  • 이서향;이재호
    • 마이크로전자및패키징학회지
    • /
    • 제26권2호
    • /
    • pp.51-54
    • /
    • 2019
  • 실리콘 기판상에 여러 조건의 전류밀도에서 로듐 도금을 실시하였다. 직류전원의 경우 전류밀도가 증가하면 로듐 표면에 균열이 발생하였다. 잔류응력을 낮추기 위하여 펄스전류를 인가하였다. 펄스전류의 off 시간이 도금층의 잔류응력을 낮추는데 영향을 주었다. 펄스전류의 인가 주기를 5:5로 하였을 경우 균열 없는 로듐 도금층을 얻었다.

유도결합플라즈마 표면 처리 및 SnO2 증착에 따른 폴리카보네이트 특성 연구 (Influence of Inductive Coupled Plasma Treatment and SnO2 Deposition on the Properties of Polycarbonate)

  • 엄태영;최동혁;손동일;엄태용;김대일
    • 한국전기전자재료학회논문지
    • /
    • 제31권3호
    • /
    • pp.156-159
    • /
    • 2018
  • Inductively coupled plasma (ICP) treatment with argon and a mixture of argon and oxygen gases has been used to modify the surface of polycarbonate (PC) substrates. The results showed that the surface contact angle was inversely proportional to the plasma discharge power and that the mixed-gas plasma (gas flow 10:10 sccm, discharge power 60 W) decreased the surface contact angle as low as $18.3^{\circ}$, indicating a large increase in the surface hydrophilicity. In addition, $SnO_2$ thin films deposited on the PC substrate effectively enhanced the ICP plasma treatment, and could also enhance the usefulness of PC in the inner parts of automobiles.

High-Performance Flexible Organic Light-Emitting Devices using Amorphous Indium Zinc Oxide Anode

  • Kang, Jae-Wook;Jeong, Won-Ik;Kim, Han-Ki;Kim, Do-Geun;Lee, Gun-Hwan;Kim, Jang-Joo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
    • /
    • pp.1425-1428
    • /
    • 2007
  • The amorphous IZO on flexible substrate (PC) shows similar electrical conductivity and optical transmittance with commercial ITO glass even though it was prepared at $<50\;^{\circ}C$. Moreover, it exhibits little resistance change during 5000 bending cycles, demonstrating good mechanical robustness. A green phosphorescent OLED fabricated on amorphous IZO on flexible PC shows maximum external quantum efficiency of ${\eta}_{ext}=13.7\;%$ and power efficiency of ${\eta}_p=32.7\;lm/W$, which are higher than a device fabricated on a commercial ITO on glass (${\eta}_{ext}=12.4%$ and ${\eta}_p=30.1\;lm/W$) and ITO on flexible PC (${\eta}_{ext}=8.5%$ and ${\eta}_p=14.1\;lm/W$).

  • PDF