• 제목/요약/키워드: PC monitoring

검색결과 563건 처리시간 0.051초

PC와 디지탈 신호 처리기를 이용한 디지탈 FHR 감시 장치의 개발 (The Development of Digital FHR Monitoring System Using PC and DSP)

  • 정지환;김선일;박문일;이두수
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1991년도 추계학술대회
    • /
    • pp.79-82
    • /
    • 1991
  • Digital FHR monitoring system based on the personal computer combined wi th the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultrasound fetal Doppler signal for digital rectification, envelope detection, autocorrealtion function calculation and its peak position detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data taransmission and on-line analysis of fetal heart rate change including on-line warning system, base-line estmation, acceleration, deceleration and variability. The advantages of PC-DSP based system can be summarized as follows: 1) Minimum hardware realization. 2) Increased flexibility. 3) Total care system.

  • PDF

IP기반 하·폐수 처리장 모니터링에 관한 연구 (Research of IP Based Monitoring System for Foul/Waste Water Disposal(Treatment) Plant)

  • 김대호;강용식;이주영;문경환;임윤식;김완식;신재권;구자완;김진태;조주필;차재상
    • 한국인터넷방송통신학회논문지
    • /
    • 제11권6호
    • /
    • pp.143-150
    • /
    • 2011
  • 본 논문에서는 하 폐수 처리장 관리에 있어 가장 중요한 각종 센서 데이터를 획득하고 관리하여 자동화하는 것을 목적으로 하는 모니터링 콘트롤 시스템을 IP기반으로 개발 하였다. 본 논문에서는 제안된 기술의 구현과정을 통해서 언제 어디서나 네트워크 접속 환경하에서 PC뿐만 아니라 스마트 기기(스마트폰, 태블렛PC 등)를 통해서도 하 폐수 처리장의 모니터링과 콘트롤을 검증하였으며, 센싱데이터의 통신성능도 근거리무선 환경을 통해 검증함으로써 제안 기술의 유용성을 확인하였다.

PC기반의 철도 온도환경에 적합한 모니터링 장치 구현 (The implementation of the PC-based monitoring device for railway temperature environmental)

  • 배거성;손기환
    • 한국전자통신학회논문지
    • /
    • 제9권7호
    • /
    • pp.819-825
    • /
    • 2014
  • 우리나라의 일교차는 커지고 있으며, 기후로 인한 철도 피해와 경제적 손실에 대한 보고로 환경이 열악해지는 것을 알 수 있다. 이러한 상황에서도 철도용 모니터링 장치는 운영과 관리를 지원하기 위해 상시 동작해야 하는 장치다. 따라서 본 연구에서는 COM 기반의 모니터링 장치를 산업용-확장 전자부품을 사용하여 구현 및 제작하였으며, 실제 철도 온도환경에 적합 여부를 시험하였다. 시험을 통해 모니터링 장치의 내한성, 내열성에 대한 검증을 할 수 있었다. 제품에 사용된 부품은 철도산업의 전자제품 개발에 활용할 수 있을 것이다.

유비쿼터스 헬스케어를 위한 센서 네트워크 기반의 심전도 및 체온 측정 시스템: 2. 생체신호 모니터링 소프트웨어 시스템 (A study on WSN based ECG and body temperature measuring system for ubiquitous healthcare: 2. Vital signal monitoring software system)

  • 이대석;정완영
    • 센서학회지
    • /
    • 제15권6호
    • /
    • pp.417-424
    • /
    • 2006
  • An ubiquitous healthcare monitoring system for elderly person at home was designed for continuous healthy monitoring of elderly person or patients. Human vital signals, such as ECG and body temperature, were monitored by terminal PC or PDA via ECG and temperature sensor nodes on the patient's body. From the ECG data, the heart rate, tachycardia, bradycardia and arrhythmia were diagnosed on the terminal PC or PDA to assist doctor's or nurse's aid or patient itself to monitor the patient's condition and give medical examination. Artificial judgement support system was designed in server computer and the system support a doctor or nurser for management or treatment of the patient. This system can be applied to vital signal monitoring system for solitude elderly person at self house or home health care service part. And this ubiquitous healthcare system can reduce the medical expenses in coming aging or aged society.

Investigation on vibration behavior of a high-speed railway bridge based on monitoring data

  • Qingxin Zhu;Hao Wang;Billie F. Spencer Jr
    • Smart Structures and Systems
    • /
    • 제31권6호
    • /
    • pp.585-599
    • /
    • 2023
  • Field monitoring techniques offer an attractive approach for understanding bridge behavior under in-service loads. However, the investigations on bridge behavior under high-speed train load using field monitoring data are limited. The focus of this study is to explore the structural behavior of an in-service long-span steel truss arch bridge based on field monitoring data. First, the natural frequencies of the structure, as well as the train driving frequencies, are extracted. Then, the train-induced bearing displacement and structural strain are explored to identify the effects of train loads and bearings. Subsequently, a sensitivity analysis is performed for the impact factor of strain responses with respect to the train speed, train weight, and temperature to identify the fundamental issues affecting these responses. Additionally, a similar sensitivity analysis is conducted for the peak acceleration. The results indicate that the friction force in bearings provides residual deformations when two consecutive trains are in opposite directions. In addition, the impact factor and peak acceleration are primarily affected by train speed, particularly near train speeds that result in the resonance of the bridge response. The results can provide additional insight into the behavior of the long-span steel truss bridges under in-service high-speed train loads.

Car PC 환경에서 Bird's Eye View를 제공하는 4SM (4-Sided Monitoring) 시스템 설계 및 구현 (Design and Implementation of 4-sided Monitoring System providing Bird's Eye View in Car PC Environment)

  • 유영호;장시웅
    • 한국정보통신학회논문지
    • /
    • 제16권1호
    • /
    • pp.153-159
    • /
    • 2012
  • 운전자의 시야는 차량 구조 등 물리적인 요소들로 인해 차량 주변 환경에 대한 사각지대가 존재한다. 사각지대에 존재하는 장애물은 차량 파손 및 인사 사고의 원인이 된다. 차량 주변의 사각지대 개선을 위해 최근 출시되는 차량에는 장애물 감지 센서, 후방 카메라 등 운전자의 시각에서 벗어난 곳의 장애물에 대한 정보를 제공하기 위한 장치들과 차량 주변 환경을 영상으로 제공하는 AVM(Around View Monitoring) 시스템 등 안전 운행을 위한 전장 장치들이 장착되고 있다. 운전자는 후진 주행이나 좁은 골목길 주행시 이러한 장치들에서 제공되는 차량 주변 환경에 대한 정보를 얻음으로써 안전 운행에 도움을 받고 있다. 본 논문에서는 운전자의 시야 개선을 위해 차량의 전, 후, 좌, 우에 4대의 카메라를 부착하여 차량 주변을 한 눈에 볼 수 있는 통합된 Bird's Eye View를 제공하는 4SM 시스템을 설계하고 구현한다. 본 논문에서 제안하는 4SM 시스템은 전, 후, 좌, 우 4대의 카메라로부터 입력된 영상을 통합된 하나의 영상으로 제공함으로써 운전자가 한 눈에 차량 주변 상황을 인식할 수 있도록 한다.

전동차 검수용 모니터링 알고리즘에 관한 연구 (The Study of the Monitoring Algorithm for Electric Car Inspection and Repair)

  • 김연충;박영민;원충연;김길동;한영재
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 추계학술대회 논문집 학회본부
    • /
    • pp.521-523
    • /
    • 1997
  • In this paper, We carried out investigation of monitoring algorithm development for electric car inspection and repair. For transmitting a data, reliable RS-422 is adopted. The LabWindows/CVI development tool of National Instruments Co. is used for the formation of monitoring screen. The experimental set-up is composed of a PC to PC system. It is applicable to electric car imspection and repair.

  • PDF

ARM 9 임베디드 시스템에 의한 무선 제어 및 영상 감시 로봇 구현 (Implementation of Wireless Control and Image Monitoring Robot using ARM 9 Embedded System)

  • 윤효원;한경호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.166-168
    • /
    • 2007
  • This paper is dealing with how to control of a client robot's movement for instructions from a server PC and a wireless andremote control Robot that sends the server information of images for monitoring. To implement this. 802.11x WLAN with TCP/IP socket programming is used to get the driving instructions from the server PC and control movements of the robot such as a forward, backward and directions. As well as this, ARM9 cored PAX255 embedded processor and Linux OS is used for the function transmitting BMP format of 320 ${\times}$ 240 pixel for stopped image data.

  • PDF

마이크로프로세서를 이용한 인터넷 원격감시제어 시스템에 관한 연구 (A study on the Internet control and monitoring system using a microprocessor embedded controller)

  • 서인호;문복산;김경엽;김영일;천행춘;유영호
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
    • /
    • pp.152-156
    • /
    • 2000
  • Many industrial equipments use RS-232C interface. But Ethernet using CSMA/CD was widly spread recently. This interface is not compatible with RS-232C and requires PC based system. So In this Paper, We decribe a Internet control and monitoring system that control and watch plants without PC. We developed IP controller consisted of microprocessor and NIC and monitoring system using VC++ and SQL database. The protocol used this system is UDP/IP because it is applicable for real time system.

  • PDF

인버터 시스템 진단을 위한 모니터링 알고리즘 구현에 관한 연구 (The Study of the Monitoring Algorithm for Examination of Inverter Sysyem)

  • 안용상;김연충;안정준;원충연;강기호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.2124-2126
    • /
    • 1998
  • In this paper, we carried out investigation of monitoring algorithm development for examination of inverter system. For transmiting data, RS-422C is adopted. The LabWindows/CVI development tool of National Instruments Co. is used for the formation of monitoring screen. The experimental set-up is composed of a PC to PC system. It is applicable to electric car inspection and repair.

  • PDF