• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.57-64
• /
• 2008

In this paper, we propose a system-level simulator for the performance analysis of a Solid-State Disk (SSD) in PC environment by using TLM (Transaction Level Modeling) method. Our method provides quantitative analysis for a variety of architectural choices of PC system as well as SSD. Also, it drastically reduces the analysis time compared to the conventional RTL (Register Transfer Level) modeling method. To show the effectiveness of the proposed simulator, we performed several explorations of PC architecture as well as SSD. More specifically, we measured the performance impact of the hit rate of a cache buffer which temporarily stores the data from PC. Also, we analyzed the performance variation of SSD for various NAND Flash memories which show different response time with our simulator. These experimental results show that our simulator can be effectively utilized for the architecture exploration of SSD as well as PC.

• The KIPS Transactions:PartB
• /
• v.17B no.3
• /
• pp.227-232
• /
• 2010

This paper proposes the real time lip reading method in the embedded environment. The embedded environment has the limited sources to use compared to existing PC environment, so it is hard to drive the lip reading system with existing PC environment in the embedded environment in real time. To solve the problem, this paper suggests detection methods of lip region, feature extraction of lips, and awareness methods of phonetic words suitable to the embedded environment. First, it detects the face region by using face color information to find out the accurate lip region and then detects the exact lip region by finding the position of both eyes from the detected face region and using the geometric relations. To detect strong features of lighting variables by the changing surroundings, histogram matching, lip folding, and RASTA filter were applied, and the properties extracted by using the principal component analysis(PCA) were used for recognition. The result of the test has shown the processing speed between 1.15 and 2.35 sec. according to vocalizations in the embedded environment of CPU 806Mhz, RAM 128MB specifications and obtained 77% of recognition as 139 among 180 words were recognized.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.189-198
• /
• 1998

3D medical image reconstruction techniques are useful to figure out complex 3D structures from the set of 2D sections. In the paper, 3D medical image reconstruction system is constructed under PC environment and programmed based on modular programming by using Visual C++ 4.2. The whole procedures are composed of data preparation, gradient estimation, classification, shading, transformation and ray-casting & compositing. Three speed optimization techniques are used for accelerating 3D medical image reconstruction technique. One is to reduce the rays when cast rays to reconstruct 3D medical image, another is to reduce the voxels to be calculated and the other is to apply early ray termination. To implement 3D medical image reconstruction system based on PC, speed optimization techniques are experimented and applied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.1
• /
• pp.63-82
• /
• 1995

In recent years, through the rapid development in personal computer technology, it has become possible to make a radar simulator based on the personal computer. The advantage of the personal Computer aidd radar simulator lies in its cost effectiveness, when comparing with that using the real radar. Although there have been studies carried out to develop radar simulator using PC and the products of thi kind is in the commercial market already, they are all using the mockup of the real radar, and therefore, the price of the simulator is still rather expensive. In this respect, this thesis aims to develop a ARPA radar simulator which is running on the sole PC, so that the students of the maritime educational institution may get ARPA radar training easily and cheaply. The simulator developed in this thesis using Visual Basic is found to run successfully on the 486PC, and it is expected that this new simulator system designed first time in Korea would be used as an easily accessible ARPA radar training equipment.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.41-46
• /
• 2005

A new PC cluster was designed and constructed based on Windows XP Operating system. Primary target of the present design was the high node density per rack by using the general PC parts those are cost-effective and readily available in the market. Other major design points were system cooling and the convenient maintenance using standard PC parts. Presently 24 nodes per rack seems to be optimum considering the specification of the network switching device, system cooling and power supply, but 40 nodes can be accommodated within a single rack at maximum. Windows XP was selected as a high-performance computing environment considering the cost and the convenience in acquisition, maintenance and education. Both fast-Ethernet and Gigabit Ethernet network connection were tested and compared with previous data, especially for Linux doter using Myrinet. The result shows that there is no significant difference between the operating systems and the Fast-Ethernet and/or Gigabit Ethernet are good solution for the high-performance PC cluster considering the cost and performance.

• Journal of The Korean Association of Information Education
• /
• v.7 no.3
• /
• pp.353-361
• /
• 2003

All elementary, middle, and high schools have many Personal Computers(PC) by educational information policy, and their computers have been applied to the school education. However, it is difficult to manage the PCs, and it cost to maintain the PCs and PCs must be upgaded and replaced each four years. In order to solve these problem, I propose the method of using the terminal server. This method can make the software and PC hardware maintain easily, and reduce the maintenance fee, need not upgrade and replace the new PCs.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In the industrial field nowadays the information that needs to be handled arc increasing and requires faster speed in contrast with PLC(Programmable Logic Controller) or DCS(Distributed Control System) based control systems these days. The work environment these days are mostly based on PC, so the control systems are wanted in PC. At Fieldbus used automated systems performing distributed process control by PC performs and combines into one system in order to maximize the increase of productivity, lower the expense, planning constructing and maintaining the reliance of automation. These latest automation systems unites process, makes distributed control process able, and can control and supervise at remote PC.

• Journal of Biomedical Engineering Research
• /
• v.12 no.4
• /
• pp.243-248
• /
• 1991

This paper described the implementation of high speed transmission fort medical image between hospitals using ISDN. The implemented system, called PC-card, can transmit datas as 144Kbps and can install in the personal computer. So, this enables to get more reliable medical image with less cost, and to service the better quality for an unurbanized area. In this system, installing in the PC system were enhanced to input from medical image system and output to the memory or display

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.2
• /
• pp.97-104
• /
• 1998

This study reviews usability of PC communication softwares with different dialogue types of user interface. Usability test was conducted to evaluate usability of 3 PC communition softwares which are currently utilized in Korea. Learnability was adopted as an index of usability evaluation, so learning time, testing time and scores were measured as dependent variables. It is suggested that softwares with mixing dialogue type(menu, icon, command) which were implemented in window systems environment were not superior to that with command dialogue type.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.221-233
• /
• 2008

In general, we use a Parallel processing computer manufactured specially for the purpose of parallel processing to do high performance computings. But we can depoly and use a PC cluster composed of several common PCs instead of the very expensive parallel processing computer. A common way to get a PC cluster is to adopt the star topology network connected by a switch hub. But in this paper, we grope efficient implementations of hypercube networks based on TCP/IP to connect 8 PCs directly for more useful parallel processing environment, and make evaluations on functionality and efficiency of them using ping, netperf, MPICH. The two proposed methods of implementation are IP configuration based on link and IP configuration based on node. The results of comparison between them show that there is not obvious difference in performance but the latter is more efficient in simplicity of routing table. For verification of functionality, we compare the parallel processing results of an application in them with the same in a star network based PC cluster. These results also show that the proposed hypercube networks support a perfect parallel processing environment respectively.