• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.415-425
• /
• 2000

An open architecture manufacturing strategy intends to integrate manufacturing components on a single platform so that a particular component can be easily added and/or replaced. Therefore, the control scheme based upon the open architecture concept is hardware-independent. In this paper, a modular and object oriented approach for a PC-based open robot control system is investigated. A standard reference model for robot systems, which consists of three modules; hardware module, operating system module, and application software module, is first proposed. Then, a PC-based Open Robot Controller(PC-ORC), which can reconfigure robot control systems in various production environments, is developed. The PC-ORC is built upon the object-oriented method, and allows an easy implementation and modification of various modules. The PC-ORC consists of basic softwares, application objects, and additional hardware device on the PC Platform. The application objects are: sequencer, computation unit, servo control, ancillary equipment, external sensor control, and so on. In order to demonstrate the applicability of the PC-ORC, the proposed PC-ORC configuration is applied to an industrial SCARA robot system.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.587-600
• /
• 2016

Purpose: This paper evaluates the performance of the pre-control(PC), an alternative to statistical process control techniques and compares with a control chart considering the tolerance of process. Methods: The previous studies for PC have drawbacks that PC with two linked stages, qualification and running, are discussed separately and independently. Hence this paper analyzes the performance of PC by integrating two stages. Results: Average outgoing quality limits to grasp the outcome of PC are provided by computational results for two process capability indexes, $C_p$ and $C_{pk}$ and the usefulness of PC from comparative experiments with modified control charts is commented. Conclusion: Helpful guidelines for quality managers to apply PC in practice and areas of process for PC to be more benefit are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.575-579
• /
• 2005

In this paper, the development of an IMM(Injection Molding Machine) controller is discussed. Presently, the Mold Close and Open Control Method of a toggle-type IMM is open-loop control. Through the development, a PC based control system was built instead of an existing controller and a closed-loop control replaced the previous control method by using PC based PLC. To control the nonlinear system of toggle type clamping unit, a fuzzy PI control algorithm was selected and it was programmed by an IL(Instruction List) and a LD(Ladder Diagram) on a PC based PLC. The application of fuzzy algorithm as the control method was also considered to change a control object like a mold replacement or an additional apparatus. For the development of an IMM controller, PC based PLC of PCI card type, distributed I/O modules with CANopen and Industrial PC and HMI (Human Machine Interface) software were used.

• The Journal of Information Technology
• /
• v.4 no.1
• /
• pp.9-22
• /
• 2001

In this paper, We control remote robot using web browser. This system used independent four PC and each PC is used to operator PC, database server, web server and robot control PC. Remote control can escape the operator from constraint the time and workspace. If operator inputting control data in web browse then the control data is saved the data base server. The robot control PC is inputted control data from database at access intervals of 1ms. Also, if the control data is changed then robot is operated. It made simple robot using step-motor and the robot is operated by web browser. Finally, Robot system is exactly operated using control data and certificate of possibility the remote robot control using web browser.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In the industrial field nowadays the information that needs to be handled arc increasing and requires faster speed in contrast with PLC(Programmable Logic Controller) or DCS(Distributed Control System) based control systems these days. The work environment these days are mostly based on PC, so the control systems are wanted in PC. At Fieldbus used automated systems performing distributed process control by PC performs and combines into one system in order to maximize the increase of productivity, lower the expense, planning constructing and maintaining the reliance of automation. These latest automation systems unites process, makes distributed control process able, and can control and supervise at remote PC.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

This research aims at developing a low-cost PC-NC system based on one-CPU and investigating the feasibility of its application to a simple-function lathe. Its hardware consists a two axes motion control board including a 24bit counter, 8253 timer, a 12bit DA converter, DIO board for PLC operation and a PC with Intel Pentium 466MHz. The fundamental real-time MC functions such as G-code interpretation, interpolation, position and velocity control of axes are performed. User programming interface with functions of icon manipulation, tool-path simulation and NC-code generation was implemented. In order to achieve real-time control and safety, axis control, NC interpretation, interpolation and user communication are completely executed during every interrupt interval of I msec.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.462-466
• /
• 1997

Proportional directional control valves (PDCVl adjust the amount of flow as well as flow direction in response to an electrical signal. This valves includes direct operated valves with or without spool position feedback. This paper investigates if it is possible to control pressure of fluids by means of the PDCV. A pressure signal is feed back to the Proportional-Integral (PI) controller, which is based upon a personal computer (PC). The PI control algorithm is implemented in a graphical programming language of LabVIEW. The results of experiments show the PDCV can be used a multi function valve of pressure control as well as direction control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.520-526
• /
• 2013

This study presents the unit control of a PC (Personal Computer) program using multiple smartphones based on ad hoc communication. A design of the data packet that multiple smartphones send to a computer, and a framework that manages and controls the unit in a computer after analyzing the data packet, are proposed. As a result, multiple users are able to control their own units using their smartphones while seeing the monitor connected to a computer. In other words, multiple users can share the same game in a computer or control their units embedded in a system using their smartphones. An experimental result shows that a racing game in a PC can be realized by the proposed communication interface, where four iPhones are used to control their units in a computer. Thus, the proposed framework can be effectively used for unit control in a PC using multiple smartphones.

• Journal of Korea Technology Innovation Society
• /
• v.3 no.2
• /
• pp.78-93
• /
• 2000

Since computerized numerical controller(CNC) emerged as a result of the fusion of the electronics technology and the mechanical technology, there has been continuous evolution of CNC technology in the mechatronics industry. The industry is recently developing a new control system based on the fusion of personal computer(PC) and CNC. Upgraded PC has now integrated into CNC, making various machines possible to exchange data, software and hardware, and to greatly improve man-machine interface. The fusion of PC and CNC can form a new paradigm in technological innovation of not only control system but also whole machinery industry in near the future. Korea lagged behind the developed countries in the development of open control system with the fusion of PC. Turbotek, Hyundai Motor and Daewoo are leading companies, but their commercial possibility seems to be low because domestic market is too small to reap a commercial benefit. Nevertheless, the development of the system is an essential step for Korea to embark on a future technological paradigm of the machinery industry. The government needs to play some role for the development, for instance, government R&D projects, institutional building and training of related technicians.

• The Journal of Korean Association of Computer Education
• /
• v.3 no.1
• /
• pp.109-115
• /
• 2000

In this paper, we have designed the management System to monitor and control computers running on MS Windows in the PC room using SNMP. The proposed system has controlling capability to control the status of PC and monitoring functions to have real-time monitoring and process control. In the controlling system, it supports update and setting of the configuration information of PC and backup/restore the information when it happens to be some faults. In the monitoring system, it has monitoring the PC of students, controlling the process on PC, and invoking a new job. This system contributes to enhance the effectiveness of teacher's educational activities in PC room by controlling and monitoring the program running on student's computer.