• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.145-155
• /
• 2023

Objectives: A fit test panel is needed to identify the fit performance of a respirator and its face seal. This is a criterion for selecting subjects that can represent the facial characteristics of users. Although anthropometry data has been developed for people in United States and China it is not yet present in Korea. This study aimed to develop a Korean fit test panel and test headform. Methods: For the 7th and 8th waves of the Size Korea anthropometry data, facial measurements of 11,429 people aged 15 to 69 years were used for analysis. PCA and bivariate panel were classified using the ISO16976-2:2022(E) anthropometrics analysis method. Based on this result, a static headform was developemed and a fit test chamber was constructed. Results: Of the 11,429 Korean people used for principal component analysis, 11,300 were included in the ellipse, marking an acceptance rate of 98.87% on PCA panel. The face types were classified into five types. Among them, a large, medium, and small static headform were printed using a 3D printer. In addition, 10,985 people (96.12%) were included in the bivariate panel based on face length and face width. The y-axis (face length) boundary was 97.87 to 134.59 mm, and the x-axis (face width) boundary was 120.75 to 158.23 mm. Conclusions: Compared to the ISO analysis, the Korean principal component was narrower in the width item (PC1) and longer in the length item (PC2). For the future, it is necessary to conduct a fit test using the developed headform and chamber device to confirm the usefulness of this Korean test panel. Therefore, this study is considered valuable as basic research for Korean test panels.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.171-178
• /
• 2023

In this paper, we propose a smart automated warehouse to maximize space utilization. Previous elevator-type automatic warehouses were designed with a maximum payload of 100kg on trays, which has the problem of extremely limiting the number of pallets that can be loaded within the space. In this paper, we design a smart warehouse that can maximize space utilization with a maximum vertical stiffness of 300kg. As a result of the performance evaluation of the implemented warehouse, the maximum payload was 500.6kg, which satisfied the original design and requirements, the lifting speed was 0.5m/s, the operating noise of the device was 67.1dB, the receiving and forwarding time of the pallet was 36.92sec, the deflection amount was 4mm, and excellent performance was confirmed in all evaluation items. In addition, the PLC control method, which designs the control UI and control panel separately, was integrated into the PC system to improve interoperability and maintainability with various process management systems. In the future, we plan to develop it into a fully automatic smart warehouse by linking IoT sensor-based logistics robots.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.6 no.2
• /
• pp.149-166
• /
• 2011

This study investigates how the job satisfaction of the recipients with working ability is transformed into employment under the recent trends. The objects of this research are 15-19 years old. I used the data of YP2007. This survey were analyzed F-test by using SPSS PC win 12.0. This result maintain the importance about the policy of the recipients with working ability : (1) its bridging gaps between theory and reality, (2) focus on the Job satisfaction of the recipients with working ability, (3) developing new recipients with working ability education program, (4) elaborating the study methods. In this paper I describe one line of research focused on the job satisfaction of the recipients with working ability in view of their professional life as it is currently developed and expressed. This study also requires further studies and this study will be supplemented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.503-516
• /
• 2001

At present, environmental control system of greenhouses related with industrial automation in the korea is composed of on/off-type control machine using a timer in facilities requiring intensive labor. This system, however, makes it difficult for us to find out any status of environmental control system in greenhouses when we are situated in a remote area or at midnight. In this paper we improved a system to monitor status for manual and automatic control by means of PC by replacing an existing on/off-type controller with a display panel, It also attempts to implement DB for information on corps and to provide a user with the efficiency of getting information for plants.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.103-114
• /
• 2022

Global virtual reality (VR) and augmented reality (AR) markets are growing as VR and AR become a new source of revenue for industries around the world. In the edutech sector, an industry that combines traditional education, research on new innovative educational models and business models are scarce, and improvements are needed in the technology group and business environment to realize edutech in detail. Therefore, this study aims to define the elements strategically required for VR Toon development by comparing and analyzing the characteristics of existing touch panel-based display Toon and VR Toon content experiences. Tablet PC Toon and VR Toon were selected to conduct the research. Thirty people (19 men and 11 women) from their teens through their forties were surveyed using questionnaires. The questionnaires were formulated through a quantitative method by using AttrakDiff with a 7-point scale (-3: negative words to 3: positive words). Qualitative evaluations were also performed addressing nine concepts (satisfaction, novelty, operability, creativity, understanding, education, interest, participation, expressiveness). As a result, the usability test results of educational content using tablet personal computers and VR equipment were analyzed from the viewpoint of user experience to define elements expected to be strategically required for VR Toon development.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.105-117
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were experimentally performed on one unreinforced beam-column specimen and two reinforced specimens with L-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of L-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D except for the equation to predict the concrete breakout failure strength at the concrete side, principally agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.62-70
• /
• 2015

Recently the demand for projected capacitance touch screens is sharply growing especially for large screens for medical devices, PC monitors and TVs. Large touch screens in general need a controller of higher complexity. They usually have a larger number of driving and sensing lines, and hence it takes longer to scan one frame for touch detection leading to a low frame scan rate. In this paper, a novel touch screen control technique is presented, which scans each frame in two steps of simultaneous multi-channel driving. The first step is to drive all driving lines simultaneously and determine which sensing lines have any touch. The second step is to sequentially rescan only the touched sensing lines, and determine exact positions of the touches. This technique can substantially increase the frame scan rate. This technique has been implemented using an FPGA and an AFE board, and tested using a commercial 23-inch touch screen panel. Experimental results show that the proposed technique improves the frame scan rate by 8.4 times for the 23-inch touch screen panel over conventional methods.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.697-702
• /
• 2008

Mobile display panel is small so that users are often difficult to perceive images clearly. About image we perceive much through colors and therefore we propose color fitting approach for clear perception even on the small and low quality LCD panels. Various color modifications have been studied and used in commercial software packages. For mobile usage, our approach instantly enhances color images by modifying colors in a way to contrast differences of them. The method includes tone enhancements (which contrast dark and bright sides) and color enhancements (which reduce saturation for pure colorants). Based on color theory, our method also modifies color values towards specified complementary and preference colors. We term this color fitting. This approach enables displaying photos, multimedia messages, videos and digital media broadcasting (DMB) for better perception in real-time on mobile devices. Index Terms.) color fitting, visualization on small display, mobile graphics, visual perception.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.4
• /
• pp.181-189
• /
• 1996

It is well-known that the hearing strength in vertical joints of precast concrete large panel system is affected by grout compressive strength angle of shear key and bearing area. 21 vertical joint specimens were tested to investigate the effects of these parameters The analysis of test results shows that : 1. The higher be grout compressive strength, the higher will shear strength be. And the bearing strength does not so increase in proportion of bearing area. 2. The shear key with the angle of $20^{\circ}$shows the highest bearing strength among three angle variables of $20^{\circ}$, $25^{\circ}$, $30^{\circ}$.