• Journal of Environmental Science International
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2024

This study aimed to determine the most suitable coir substrate mixing ratio for optimizing the growth and yield of the "lpduelkkae 1" cultivar. We comprehensively analyzed the physicochemical properties, growth, and yields of four different substrate combinations: perlite (coir with mixing ratios of 70:30 (PC30), 50:50 (PC50), and 30:70 (PC70)) and 100% coir (C100). The results revealed substantial differences in substrate properties. C100 exhibited the highest total porosity and the lowest solid phase, indicating excellent air permeability. The pH levels and electrical conductivity (EC) values ranged from 5.4-6.8 and 1.2-3.1 dS·m^-1, respectively. Leaf growth parameters, including length, width, and dry weight, showed positive correlations with high coir ratios, except for PC30. PC70 and C100 outperformed other substrates in stem growth, exhibiting superior stem diameter and fresh and dry weights. The quantity of marketable leaves was the highest in the C100 substrate. Furthermore, C100 comprised integrated levels of essential nutrients, such as Ca and Mg, owing to its high coir content. In conclusion, a coir ratio of approximately 70% (v/v) should be maintained in the substrate for creating an optimal cultivation environment. Furthermore, the selection of humidity-resistant varieties as well as precise nutrient and moisture management for different seasons and growth stages are crucial for a successful perilla leaf hydroponic cultivation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.169-174
• /
• 2002

We can consider that the study on early evaluation of compressive strength and durability of concrete is useful to raise safety of quality control of concrete. In this paper, was proposed to method early to predict strength and durability of concrete with parameter, such as Water/cement(W/C) ratio and steam curing conditions. Through analyzing the relationship between the compressive strength and the amount of chloride penetration into concrete specimens, a new formula early estimating durability of the concrete structure was suggested.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.32-36
• /
• 2014

This study analyzes performance-weight ratio of polycarbonate(PC) pigpen and steel pigpen. The finite element models using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the benefit of parameter study by using APDL. We have performed a parameter study by the width variation of PC pigpen. And we compared and analyzed the results of PC pigpen and steel pigpen. From the numerical examples, we confirmed the validity of PC pigpen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.224-233
• /
• 2012

The limiting sequence and relative ratio of lysine (Lys), methionine (Met), and threonine (Thr) for calves about 2 mo of age fed milk replacers (MR) containing soy protein are not clearly defined. The objective of the study was to investigate the effect of supplementing MR containing 22% CP, half from soy protein concentrate (SPC, 40.56% CP, flour) and half from whey proteins, with Lys, Met, and Thr to estimate amino acid (AA) sequence and their relative ratio for calves about 2 mo of age. A method of partial deduction of AA was adopted. Twenty-four newborn calves (half males and half females, $40.7{\pm}0.9$ kg of BW) were fed 1 of 4 MR diets for 56 d (n = 6/diet). The diets were supplemented with all (positive control) or with 2 of the 3 AAs: Lys, Met and Thr, (i.e., PC (22% CP, 2.34% Lys, 0.72% Met and 1.80% Thr), PC-Lys (22% CP, 1.64% Lys, 0.72% Met and 1.80% Thr), PC-Met (22% CP, 2.34% Lys, 0.50% Met and 1.80% Thr), and PC-Thr (22% CP, 2.34% Lys, 0.72% Met and 1.26% Thr)). Calves were fed thrice daily; starter (20% CP, 1.03% Lys, 0.30% Met and 0.69% Thr), hay (3.23% CP, 0.29% Lys, 0.12% Met and 0.23% Thr) and water were offered free choice. Starter and hay were only offered beginning on d 36 (after 5 wk) and d 43 (after 6 wk), respectively. BW, body size and blood samples measures were taken every two weeks. Three-day total collection of feed refusals, feces, and urine were recorded starting at d 33 and d 54 of age, respectively. From the results, the limiting sequence and relative ratio between the 3 AAs in calves with different diet structures were calculated. The limiting sequence of the 3 AAs were ranked as Lys, Met and Thr; the proper ratio was 100:29:70 for MR-only diet and 100:30:60 for diets consisted of MR, starter and hay. Nitrogen digestion and utilization and nutrient digestibility were negatively affected by AA deletion treatments. From the evidence of this experiment, it did not appear that the AA limiting sequence was selectively altered by differences in diet structures such as would be encountered in practice. The relative ratio between the 3 AAs varied with the offer of starter and hay to calves, and the average ratio was 100:29.5:65 for calves during 2 to 10 wk of age.

• Clinical and Experimental Pediatrics
• /
• v.64 no.5
• /
• pp.229-238
• /
• 2021

Background: Bronchial hyperresponsiveness (BHR), an important physiological feature of asthma, is a prognostic marker of childhood asthma. Purpose: We aimed to investigate the factors associated with BHR in adolescents with childhood asthma. Methods: Two hundred and fifteen adolescents (≥13 years of age; 149 males, 66 females) who were diagnosed with asthma during childhood were enrolled, underwent methacholine challenge tests, and were divided into the BHR group (<25 mg/mL of provocation concentration causing a 20% fall in forced expiratory volume in 1 second [FEV₁] [PC₂₀], n=113) or non-BHR group (≥25 mg/mL of PC₂₀, n=102). We examined longitudinal changes in BHR and the risk factors for its persistence in the 108 adolescents for whom baseline data, including methacholine PC₂₀ at age 6 years, were available. Multivariate logistic regression analyses were performed to assess the factors associated with BHR in adolescents. Results: Mold sensitization (adjusted odds ratio [aOR], 5.569; P=0.005) and increased blood eosinophil count (aOR, 1.002; P=0.026) were independently associated with BHR in boys but not girls. The odds of BHR decreased by 32% with each 1-year increase in age in boys (aOR, 0.683; P=0.010) but not girls. A reduced FEV₁/forced vital capacity ratio (<90%) was independently related with BHR in female patients only (aOR, 7.500; P=0.007). BHR decreased with age throughout childhood. A low methacholine PC₂₀ at age 6 years was independently associated with persistent BHR throughout childhood in male and female patients, whereas early mold sensitization was a risk factor for persistent BHR in male patients only (aOR, 7.718; P=0.028). Conclusion: Our study revealed sex-specific differences in the factors associated with BHR in adolescents with childhood asthma. Our findings suggest the risk factors that might affect asthma transition from childhood to adolescence and adulthood.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.399-403
• /
• 2007

Trans-esterification behavior of polycarbonate/poly(butylene terephthalate) (PC/PBT) blends was investigated during the melt mixing process. Rheological and fracture behaviors, and fracture morphology were also investigated as a function of PC/PBT blend ratio. Based on FT-IR and $^1H-NMR$ results, a trans-esterification reaction was confirmed to occur between PC and PBT during the melt mixing process. The melt index(MI) decreased with increased PC content, indicating the higher flow resistance of PC. The storage and loss moduli were increased by increasing the PC loading, and the PC/PBT blends were rheologically incompatible based on the Cole-Cole plot. The tensile property increased linearly with the increased PC content. However, the impact strength increased until 50 wt% of PC loading, notably around $30{\sim}40wt%$, and then was levelled off at 50 wt%. Rough ridges were formed on the impact fracture surfaces above the 40 wt% of PC content, supporting the observed higher impact strength in this range.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.450-462
• /
• 2008

The physical chemistry (PC) articles published in the Bulletin of the Korean Chemical Society (BKCS) from 2003 to 2007 are surveyed, and in-depth content analysis was conducted to classify the PC articles into 12 topics used in The Journal of Physical Chemistry (JPC). The PC articles published in the Journal of the American Chemical Society (JACS) in 2007 are also surveyed. The extensive summary of all PC articles in BKCS for the last five years reveals the current trend of physical chemistry research in Korea. The comparison study with the JACS shows that the proportion of PC articles among all articles published in BKCS (16%) is slightly higher than that of JACS (11%), and the non-Korean authorship ratio of BKCS (12%) is very low compared with the non-US authorship of JACS (52%). From the comparison study with articles published in JPC in 2007, it is found that BKCS disseminates various topics of physical chemistry researches adequately. In particular, BKCS most frequently published PC articles in molecular structure and spectroscopy topics, whereas JPC published surface chemistry and nano-chemistry articles most frequently. It is concluded that BKCS should publish more articles to be a leading journal, and it is suggested that the SCI impact factor of BKCS must be increased by improving the electronic version of BKCS.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.2
• /
• pp.96-104
• /
• 2015

Reactivity of commercial WGS catalyst and four new catalysts(RMC-3, PC-73, PC-67SU, PC-59) manufactured with various compositions by Korea Electric Power Research Institute(KEPCO RI) were compared to select suitable WGS catalyst for SEWGS system. Steam/CO ratio, gas velocity, flow rates of syngas, and temperature were considered as operating variables. As a result, commercial catalyst showed the highest CO conversion and RMC-3 catalyst showed also high CO conversion. Therefore, commercial and RMC-3 catalysts were selected as applicable catalysts. However, PC-73 catalyst showed low CO conversion at low temperature($200^{\circ}C$) but showed good reactivity at high temperature($225{\sim}250^{\circ}C$), and therefore, PC-73 catalyst was selected as applicable catalyst for high temperature operation. Continuous operations up to 24 hours for those three catalysts(commercial, RMC-3, PC-73) were conducted to check reactivity decay of catalysts. All three catalysts maintained their original reactivity.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.166-171
• /
• 2001

A digital seismic data acquisition and processing system using a PC has been developed in order to replace the analog data acquisition system of shallow marine seismic survey. An A/D converter that has 12bits of resolution and 225KHz of conversion rate was ued to acquire data, and a data acquisition software was developed as a Windows program which provides convenience of use. Raw data acquired at field has been saved to the hard-disk simultaneously. The signal to noise ratio, vertical and horizontal resolution could be improved by a digital data processing of the raw data. The digital processing of the raw data includss gain recovery, filtering, deconvolution, and muting. With the prediction deconvolution algorithm multiple reflections appearing on the shallow marine seismic section could be removed successfully.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.58-64
• /
• 2012

A study on the solvent extraction for the separation and recovery of Ni and Li from the leaching solution of active cathode materials of Li-ion batteries was investigated using PC88A(2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester). The experimental parameters, such as the pH of the solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percent of Ni and Li and separation factor of Ni/Li were increased with increasing the equilibrium pH. More than 99.4% of Ni and 28.7% of Li were extracted in eq. pH 8.5 by 25% PC88A and the separation factor of Ni/Li was 411.6. From the analysis of McCabe-Thiele diagram, 99% of Ni was extracted by three extraction stages at phase ratio(A/O) of 1.5. Stripping of Ni and Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 50-60g/L of $H_2SO_4$ was effective for the stripping of Ni.