• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.148-149
• /
• 2022

The use of high-strength grout applied for facility foundations and bridges has recently been expanding in offshore wind farm. Wind farm in offshore require bearing capacity for horizontal loads such as wind, waves, and earthquakes. In order to improve the bearing force of the base part, sufficient fluidity and a certain strength should be ensured so that the high-strength grout is densely charged in the narrow space of the connection part. Therefore, in this study, changes in fluidity and strength according to the ratio of PC-based superplasticizer mixed in high-strength grout were measured. As a result, as the ratio of the superplasticizer increased, fluidity increased and strength decreased. However, the strength did not decrease when the ratio of superplasticizer was above a 0.005. Therefore, it was confirmed that the fluidity change was remarkable when a 0.005 ratio of PC-based superplasticizer were added.

• 한국식품저장유통학회지
• /
• 제30권4호
• /
• pp.602-616
• /
• 2023

Fifteen types of rice collected from Kurdistan region-Iraq were investigated by principal component analysis (PCA) in terms of physical properties and cooking characteristics. The dimensions of evaluated grains correspond to 5.05-8.75 mm for length, 1.54-2.47 mm for width, and 1.37-1.95 for thickness. The equivalent diameter was in the range of 5.23-10.03 mm, and the area took 13.30-28.25 mm². The sphericity analysis values varied from 0.32 to 0.56, the aspect ratio from 0.17 to 0.39, and the volume of the grain was measured in the range from 4.48 to 17.74 mm³, hectoliter weight values were 730-820 kg/m³, and true density from 0.6 to 0.96 g/cm³. The broken grain ratio was 1.5-18.3%, thousand kernel weight corresponded to 15.88 to 22.42 g. The water uptake ratios for 30 min of soaking were increased at 60℃ compared to 30 and 45℃. The PCA was used to study the correlation of the most effective factors. Results of PCA showed that the first (PC1) and second (PC2) components retained 63.4% and 34.8% of the total variance, which PC1 was mostly related to hectoliter, broken ratio, and moisture content characteristics while PC2 was mostly concerned with hardness and true density. For cooking properties, the PC1 and PC2 retained 88.5% and 9.3% of the total variance, respectively. PC1 was mostly related to viscosity, spring value, and hardness after cooking, while PC2 was mostly concerned with spring value, hardness before cooking, and hardness after cooking.

• 대한건축학회논문집:구조계
• /
• 제35권5호
• /
• pp.191-202
• /
• 2019

This study examines the effect of luminance contrast ratio of character on readability and visual fatigue during an hour-long reading session while using a tablet PC in ambient environments having low luminance limited to $25cd/m^2$. Experiments were conducted with four patterns of the tablet's luminance contrast ratio of characters, namely 1:2.5, 1:4.5, 1:6.5, and 1:8.5, in low ambient luminance of $9cd/m^2$ and $25cd/m^2$. The obtained results show that the characters can be easily read at the luminance contrast ratio of character of 1:8.5 under surface luminance of $25cd/m^2$. Visual fatigue was evaluated through a subjective survey of symptoms. Physical, psychological, and visual fatigue were observed at a surface luminance of $9cd/m^2$, whereas solely visual fatigue was felt at a surface luminance of $25cd/m^2$. By assessing the physical fatigue using the value, it has been found that smaller the luminance contrast ratio of character, greater is the CFF variation rate. Furthermore, readability is poor and visual fatigue can be observed when the surface luminance is lower than the ambient luminance. However, readability can be improved by increasing the luminance contrast ratio of character to a value of 1:8.5. Thus, in low luminance environments, luminance contrast ratio of characters can affect readability and fatigue. Consider providing the full form of "CFF" so that the acronym can be used unambiguously throughout the manuscript.

• 한국산업융합학회 논문집
• /
• 제13권2호
• /
• pp.99-106
• /
• 2010

The effects of additive and shrinkage reducing agent on the drying and autogenous shrinkage of high strength concrete are investigated in this study. As results, when the ratio of W/B(low water to binder ratio) increase, the compressive strength is decreased. Comparing with PC(portland cement) concrete, the strength is 2.8%, 3.2% and 3.8% lower respectively than that of PC when concrete mixing ratio is 0.2%, 0.3% and 0.4% in 28 days curing. Drying shrinkage strain of PC concrete showed $-650{\times}10^{-6}$ in 91 days curing. When SR(shrinkage reducing agent) of 0.2%, 0.3% and 0.4% is mixed, the drying shrinkage strains are 21%, 34% and 41% lower than those of PC in 91 days curing. Autogenous shrinkage strain of PC concrete appeared $-480{\times}10^{-6}$ in 56 days curing. When SR of 0.2%, 0.3% and 0.4% is mixed, the autogenous drying shrinkage strain are 12.5%, 19.8% and 33.3% lower than those of PC in 56 days curing. In cases of using the mineral and shrinkage agent or only using a shrinkage reducing agent also appeared same reducing effects for drying shrinkage and autogenous shrinkage.

• Macromolecular Research
• /
• 제16권4호
• /
• pp.367-372
• /
• 2008

We fabricated tetra(5-n-nonyl-8-tert-butyl-2,3-pyrazino[2,3-b]indolo)porphyrazinato copper(II) (Cu-Pc-$C_8$) Langmuir-Blodgett (LB) films. We further investigated the influence of arachidic acid (AA) as a transfer promoter, as well as the effect of dipping speed, on the deposition of the films on hydrophilic and hydrophobic substrates. In the case of pure Cu-Pc-$C_8$ LB deposition on a hydrophilic substrate, the transfer ratio was close to one for up-stroke depositions, but the previously deposited film was peeled off and re-spread onto water at down-stroke depositions. Whereas the stability of the Cu-Pc-$C_8$ LB films was not improved by AA addition on hydrophilic substrates, the deposition of Cu-Pc-$C_8$ was significantly improved by the presence of AA on a hydrophobic substrate. The AA-assisted deposition had transfer ratio of close to 1 and was essentially stable up to 10-layer depositions. Comparison of the UV-visible spectrum of a Cu-Pc-$C_8$/AA LB film with that of Cu-Pc-$C_8$/AA solution in dichloroethane revealed that the Soret and Q bands for the Cu-Pc-$C_8$/AA LB film were broadened and red-shifted due to the aggregation of phthalocyanines upon assembly in the LB film.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.744-746
• /
• 2008

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10 nm to 50 nm, we have obtained that the optimum CuPc layer thickness is around 40 nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$Cu_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.612-614
• /
• 2008

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10nm to 50nm, we have obtained that the optimum CuPc layer thickness is around 40nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$C_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.535-536
• /
• 2005

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10 nm to 50 nm, we have obtained that the optimum CuPc layer thickness is around 40 nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$C_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권3호
• /
• pp.321-325
• /
• 2002

Karyotype analysis was carried out on blood samples of 30 water buffaloes belonging to different breed groups (i.e. Philippine Carabao (PC), Indian Murrah (IM), Bulgarian Murrah (BM), "$F_1$ 50% IM-50% PC", "$F_1$ 50% BM-50% PC" and "75% IM-25% PC"), using the modified Leucocyte Culture Technique. The modal chromosome numbers of the PC, "$F_1$ 50% IM-50% PC", "$F_1$ 50% BM-50% PC", IM, BM and "75% IM-25% PC" were 2n=48, 49, 49, 50, 50 and 50, respectively. The water buffalo chromosomes are mostly acrocentric (79.67%) and the remainder submetacentric (20.33%). Results of the ordinary least square analysis showed significant breed effects (p<0.01) on other karyotypic characteristics (i.e. relative length, arm ratio and centromeric index). Significant correlation between karyotypic characteristics and some animal performance traits were also found. The significant correlation values imply that karyotypic characteristics can be used as important criteria to select potentially productive young water buffaloes. In the future, more production and reproduction traits from non-institutional herds should be included in the analysis to reveal meaningful correlations with various karyotypic characteristics.

• 유변학
• /
• 제8권2호
• /
• pp.119-128
• /
• 1996

폴리프로필렌(PP)/폴리카보네이트(PC) 블렌드의 유변학적 고찰을 통해 블렌드의 수 축현상과 분상상의 변형의 연관성을 연구했다. 블렌드의 수축현상은 압축과정에서 변형됐던 분산상이 고온에서 다시 원래의 무변형 상태로 복귀하면서 나타나는 탄성변형의 풀림으로 추정되고 압출팽윤의 데이터와도 부합된다. 압출온도를 최대한 낮게 해서(25$0^{\circ}C$) 제조한 블 렌드의 경우가 최대한 높게 한 경우 (29$0^{\circ}C$)보다 수축이더 큰 사실을 설명하기 위하여 순수 PC와 PP의 전단점도비와 신장점도비를 측정 비교한 결과 두 값이 공히 높은 온도의 경우 가 오히려 작게 되어 점성에 의한 분산상의 전단변형이나 신장변형이 수축의 원인이 아니라 는 것을 알아다. 한편 법선응력과 전단응력의 데이터로부터 얻은 물질풀림시간의 비는 낮은 온도의 경우가 작아서 수축현상이 분산상의 탄성에 의한 변형이라는 것을 확인했다.