• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.799-811
• /
• 2019

The aim of this study was to evaluate heavy metal contamination and pollution index of agricultural soils around industrial complexes in the Jeon-Buk Regions of Korea. Soil samples near industrial complexes in 2017 were collected at two depths (0 - 15 and 15 - 30 cm) within a 500- and 1000-meter radius before planting. Eight heavy metals (Arsenic (As), cadmium (Cd), chromium (Cr), Cupper (Cu), nickel (Ni), lead (Pb), mercury (Hg) and zinc (Zn)) and the pollution index (PI), geoaccumulation index (Igeo) and soil pollution index (SPI) were evaluated based on soil contamination warning standard (SCWS). Overall, the heavy metal concentrations were below the SCWS. The PI ranged from 0.1 to 0.9 and categorized into Group 1 which is not polluted with any heavy metals. The average Igeo values of all the soil samples ranged from - 2.56 to 3.22. The Igeo values of Cd and Hg may not represent well the pollution index because the heavy metal concentrations in the soil is lower compared to the SCWS. In fact, based on the heavy metal concentrations, the Igeo for monitored soils should be categorized into Group 1, uncontaminated to moderately contaminated. However, the Igeo of Cd and Hg are classified into heavily contaminated. These results suggest that for calculating the Igeo, the heavy metal concentration and background concentration should be used very carefully if the heavy metal concentration in the soil is lower than the background concentration. SPI for all the soil samples ranged from 0.00 to 0.11 which indicates no heavy metal pollution was observed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.204-210
• /
• 2013

This study has focused on the possibility for recycling tailings from the Sangdong tungsten mine (TA) as admixture for concrete. TA has been accumulating for several decades in Sangdong, a region in Korea, and there is a growing demand for alternative uses for this hazardous substance. In particular, the use must be in accordance with the hazardous materials stipulations under the Korean waste control act. This study showed that TA presented pH of 8.0-9.3, 18.7-22.0% of water content, 2.7% of maximum ignition loss. The chemical composition of TA showed minute differences from each depth of sampling that represented approximately 50% of $SiO_2$ and 13% of both $Al_2O_3$ and $Fe_2O_3$. The chemical composition of Cd, Cu, Zn and Pb from mortar incorporating TA showed lower levels of hazardous materials which met the specifications of the waste control act in Korea. The TA mortar also appeared very effective for stabilizing/solidifying heavy metals particularly when used in conjunction with SG.

• Journal of Environmental Impact Assessment
• /
• v.16 no.5
• /
• pp.327-340
• /
• 2007

The $PM_{10}$ and $PM_{2.5}$ aerosols were collected at Busan from March to May, 2005, and the concentrations of some metallic elements were analysed to study their characteristics. The mean concentration of $PM_{10}$ was $66.5{\pm}23.0{\mu}g/m^3$ with a range of 22.2 to $118.1{\mu}g/m^3$. The mean concentration of $PM_{2.5}$ was $46.1{\pm}17.2{\mu}g/m^3$ with a range of 9.7 to $83.3{\mu}g/m^3$. The ratio of $PM_{2.5}/PM_{10}$ was 0.69 at Busan. The distribution of metallic elements for $PM_{10}$ and $PM_{2.5}$ were Cd${\ldots}$ ${\ldots}$ $PM_{10}$ were $94.9{\mu}g/m^3$ and $63.7{\mu}g/m^3$, respectively. And The mean mass concentrations of Asian dust and non Asian dust in $PM_{2.5}$ were $56.9{\mu}g/m^3$ and $45.1{\mu}g/m^3$, respectively. The mean values of crustal enrichment factors for five elements (Cd, Cu, Pb, V and Zn) were all higher than 10, possibly suggesting the influence of anthropogenic sources. The soil contribution ratios for $PM_{10}$ and $PM_{2.5}$ were 20.5% and 19.4, respectively.

• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.1-8
• /
• 1998

This study was carried out to investigate the distribution of PAHs in atmosphere and soil, and their relationship, accumulation tendency in soil, and its contain burden ratio (%) the PM$_{10}$ and soil were sampled adjacent to a roadside and analysed by HPLC from August 25th 1996 to September 22nd 1996 in Seoul and Kunggido area. The main results are summarized below 1. The concentration of PM$_{10}$ in the ambient air was showed in order of industrial region ($142.70\pm 21.77 \mu g/m^3$), commercial region ($136.51\pm 31.62 \mu g/m^3$), residential region ($110.12\pm 14.98 \mu g/m^3$), greenbelt region ($77.44\pm 12.12 \mu g/m^3$), respectively. 2. Distribution of PAHs concentration level in PM$_{10}$ and soil was showed in order of industrial region, commercial region, residential region, greenbelt region, respectively in all components. 3. The contain burden ratio (%) in PM$_{10}$ was attested that BbF was the highest contain burden component (21.7-32%) and An was the lowest contain burden component (0.35-1.95%) in all region. 4. The contain burden ratio (%) in soil was attested that Pb (20.5%) was the highest and An (0.8%) was the lowest contain burden component in industrial region and BbF (21.9%) and An (0.45%) were the same tendency in commercial region and Py (21.6%) and BkF (3.5%) were in residential region, Py (29%) and An (2.6%) were in greenbelt region. 5. The relationship between concentration of PAHs in PM$_{10}$ and soil was attested that the component of BbF (r=0.514) was very highly correlated, and there were significant in Fl and BaA in soil between industrial region and commercial region (P<0.05).

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.401-409
• /
• 2009

The results of particulate matters level and heavy metal concentration, which surveyed in Gwang-Yang, Dang-Jin steel industry area, are as follows; The $PM_{2.5}$, $PM_{10}$ of exposure area are $22.3{\mu}g/m^3$, $40.4{\mu}g/m^3$ each in Kum-Ho dong, and $28.1{\mu}g/m^3$, 51.5 each in Jung dong. The $PM_{2.5}$, $PM_{10}$ of control area are $16.4{\mu}g/m^3$, $29.5{\mu}g/m^3$ each in Bonggang-myeon. The level is higher in exposure area than control area. In case of Dang Jin, the concentration of $PM_{10}$ and $PM_{2.5}$ is higher in exposure area than control area ($PM_{2.5}-20.4{\mu}g/m^3$, $PM_{10}-39.2{\mu}g/m^3$). The Pb level of Dang Jin area is higher in exposure area ($0.13{\mu}g/m^3$) than control area ($0.1{\mu}g/m^3$) and both Gwang-Yang and Dang-Jin area lower level than the Guideline level of Korea EPA.

• Environmental Engineering Research
• /
• v.15 no.4
• /
• pp.183-190
• /
• 2010

Biogenic Mn oxides are expected to have great potential in the control of water pollution due to their high catalytic activity, although information on biological Mn oxidation is not currently sufficient. In this study, the growth of a Mn oxidizing microorganism, Pseudomonas putida MnB1, was examined, with the Mn oxides formed by this strain characterized. The growth of P. putida MnB1 was not significantly influenced by Mn(II), but showed a slightly decreased growth rate in the presence of Pb(II) and EE2, indicating their insignificant adsorption onto the cell surface. Mn oxides were formed by P. putida MnB1, but the liquid growth medium and resulting biogenic solids were poorly crystalline, nano-sized particles. Biogenic Mn oxidation by P. putida MnB1 followed Michaelis-Menten kinetics, with stoichiometric amounts of Mn oxides formed, which corresponded with the initial Mn(II) concentration. However, the formation of Mn oxides was inhibited at high initial Mn(II) concentration, suggesting mass transfer obstruction of Mn(II) due to the accumulation of Mn oxides on the extracellular layer. Mn oxidation by P. putida MnB1 was very sensitive to pH and temperature, showing sharp decreases in the Mn oxidation rates outside of the optimum ranges, i.e. pH 7.43-8.22 and around 20-$26^{\circ}C$.

• 한국해양학회지
• /
• v.13 no.2
• /
• pp.11-16
• /
• 1978

The contents of heavy metals were studied on sediments collected from the southeastern coastal area of Korea.Concentrations of the elements showed Cu 14∼ 48ppm (av. 18ppm), Pb 14∼49ppm (av. 28ppm), Zn 79∼187ppm (av. 11ppm), Co 11∼ 15ppm (av. 13ppm), Ni 22∼32ppm (av. 29ppm), Fe 3.1∼5.3% (av. 4.3%) and Mn 333 ∼1010ppm (av. 499ppm). When these values are compared with those of the unpolluted near-shore sediments from other countries,there seems to be little environmental contamination of heavy metals in the sediments of the study area. However, from the fact that the nearer to harbor the stations are, the higher the contents of copper, lead and zinc are in the sea off Pusan Bay, it is suggested that heavy metals in the sediments are starting to show some contamination from man's activities.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.1
• /
• pp.11-22
• /
• 2000

Polycyclic aromatic hydrocarbons(PAHs) have known as potentially hazardous air pollutants(HAPs0 to human health because of its carcinogenic and mutagenic behaviors. The purpose of this study was to determine the level of 6 PAHs(Fluoranthene, Pyrene, Benzo[a]anthracene, Chrysene, Benzo[b]fluoranthene, and Benzo[a]pyrene) as well as 10 inorganic elements(Cr, Na, K, Zn, Pb, Fe, Cu, Ti, Al and Cd) in the ambient PM-10. The total of 115 samples had been collected from February, 1996 to June, 1996 on quartz fiber by a PM-10 high volume air sampler near the Yong-Tong Apartment complexes. A statistical analysis was performed for the PAHs and inorganic elements data set using a principal component analysis in order to identify qualitatively the potential sources of PM-10. A total of 6 principal components were separated by intensive data pretrement and transformation processes, such as soil, refuse incineration, oil burning, coal burning, field burning, vehicle emission sources. The results showed that PAHs were associated with various burning activities like refuse and field burning, coal burning, and oil burning emissions in the study area. These derived sources were well matched with the previously known source profiles in terms of compositonal order and level of measured species. The combination data set consisted of both organic and inorganic species might provide more powerful source signature and might increase the number of potentially derived sources than PAHs or inorganic data alone.

• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.3
• /
• pp.279-285
• /
• 1995

Despite the frequent incidence of embryo fragmentation in early human embryos, the reason of the embryo fragmentation has not been known yet. This study was conducted to investigate the histological difference(s) between fragmented (FR) and non-fragmented (NFR) human embryos focusing on comparison of mitochondrial distribution and protein synthesis. Multi-pronuclei zygotes (MPZ) such as three or more pronuclei containing in human in vitro fertilization and embryo transfer (IVF-ET) program were used for this study. MPZ were cultured in TCM-199 supplemented with 10% of human fetal cord serum (hFCS) in 5% $CO_2$ incubator at $37^{\circ}C$ for 24 hours. The cleaved embryos to 2-4 cells after 24 hours were grouped by their grade of fragmentation. Embryos were stained with Rhodamine123 (Rh123) and fluorescence was evaluated under the fluorescence microscope through PB 450-490 filter (Leitz). Regarding to protein synthesis during early human embryogenesis, there is no significant difference in the amount of synthetic proteins between FR and NFR embryos. Distribution of cytoplasmic organelles in embryos was evaluated by transmission electron microscope (TEM). The cytoplasmic distribution of mitochondria was different between FR and NFR embryos. The mitochondrial distribution was even in NFR, whereas severely aggregated in FR. It is not able to clarify in the present study whether this uneven mitochondrial distribution in FR embryo is the reason for embryo fragmentation or is the result from fragmentation. Physiological disparity related to the mitochondrial distribution may be one of the reasons for embryo fragmentation. Further studies should be addressed to investigate the physiological differences between FR and NFR embryos.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.690-698
• /
• 2012

Cr-B2, a Gram-negative hexavalent chromium [Cr(VI)] reducing bacteria, was isolated from the aerator water of an activated sludge process in the wastewater treatment facility of a dye and pigment based chemical industry. Cr-B2 exhibited a resistance for 1,100 mg/l Cr(VI) and, similarly, resistance against other heavy metal ions such as $Ni^{2+}$ (800 mg/l), $Cu^{2+}$ (600 mg/l), $Pb^{2+}$ (1,100 mg/l), $Cd^{2+}$ (350 mg/l), $ZN^{2+}$ (700 mg/l), and $Fe^{3+}$ (1,000 mg/l), and against selected antibiotics. Cr-B2 was observed to efficiently reduce 200 mg/l Cr(VI) completely in both nutrient and LB media, and could convert Cr(VI) to Cr(III) aerobically. Cr(VI) reduction kinetics followed allosteric enzyme kinetics. The $K_m$ values were found to be 43.11 mg/l for nutrient media and 38.05 mg/l for LB media. $V_{max}$ values of 13.17 mg/l/h and 12.53 mg/l/h were obtained for nutrient media and LB media, respectively, and the cooperativity coefficients (n) were found to be 8.47 and 3.49, respectively, indicating positive cooperativity in both cases. SEM analysis showed the formation of wrinkles and depressions in the cells when exposed to 800 mg/l Cr(VI) concentration. The organism was seen to exhibit pleomorphic behavior. Cr-B2 was identified on the basis of morphological, biochemical, and partial 16S rRNA gene sequencing chracterizations and found to be Acinetobacter sp.