• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1196-1200
• /
• 2009

본 논문에서는 통과대역을 가변하는 대역통과여파기를 제안하였다. 이 여파기의 구조는 2단 Direct Capacitive Coupled 공진기 대역통과여파기이며, 중심주파수의 가변을 위하여 여파기에 사용된 병렬 공진기의 캐패시터를 버렉터 다이오드로 대체하였다. 본 논문에서는 중심주파수 200MHz에서 최대 245MHz까지 가변되는 대역통과여파기를 제작하여 설계 이론의 타당성을 검증하였다.

• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.785-790
• /
• 2005

High-speed multi-pass wet wire drawing has become very common for production of high-carbon steel cord because of the increase in customer demand and production rates in real industrial fields. Although, the wet wire drawing process is performed at a high speed usually above 1000m/min, greater speed is required to improve productivity. However, in the high-carbon steel wire drawing process, the wire temperature rises greatly as the drawing speed increase. The excessive temperature rise makes the wire more brittle and finally leads to wire breakage. In this study, the variations in wire temperature during the multi-pass wet wire drawing process were investigated. A multi-pass wet wire drawing process with 21 passes, which is used to produce steel cord, was redesigned by considering the increase in temperature. Through a wet wire drawing experiment, it was possible to increase the maximum final drawing speed to 2000m/min.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.675-681
• /
• 2016

A 41dB gain control range $6^{th}$-order band-pass receiver front-end (RFE) using CMOS switched frequency translated impedance (FTI) is presented in a 40 nm CMOS technology. The RFE consists of a frequency tunable RF band-pass filter (BPF), IQ gm cells, and IQ TIAs. The RF BPF has wide gain control range preserving constant filter Q and pass band flatness due to proposed pre-distortion scheme. Also, the RF filter using CMOS switches in FTI blocks shows low clock leakage to signal nodes, and results in low common mode noise and stable operation. The baseband IQ signals are generated by combining baseband Gm cells which receives 8-phase signal outputs down-converted at last stage of FTIs in the RF BPF. The measured results of the RFE show 36.4 dB gain and 6.3 dB NF at maximum gain mode. The pass-band IIP3 and out-band IIP3@20 MHz offset are -10 dBm and +12.6 dBm at maximum gain mode, and +14 dBm and +20.5 dBm at minimum gain mode, respectively. With a 1.2 V power supply, the current consumption of the overall RFE is 40 mA at 500 MHz carrier frequency.

• 한국지열·수열에너지학회논문집
• /
• 제15권4호
• /
• pp.46-54
• /
• 2019

In this study, the performance of a shell and tube heat exchanger (STHE) and welded plate heat exchanger (WPHE) was measured experimentally. The pass numbers of the STHE was changed by 1, 2 and 4. As a result, the WPHE showed 2.1 times higher heat exchange capacity than that of the STHE. In case of pressure drop, the STHE with 1 and 2 pass number has a lower pressure drop than the WPHE, while the STHE with 4 pass presented higher pressure drop than the WPHE. The performance index considering the heat exchange capacity and pump consumption power, showed in oder of STHE_Pass1 > STHE_Pass2 > W PHE > STHE_Pass4 under the same flow rate. Therefore, when the WPHE was designed optimally under same operating condition with STHE, the maintenance fee and space can be reduced effectively by using the WPHE.

• The Journal of Korean Physical Therapy
• /
• 제21권1호
• /
• pp.9-17
• /
• 2009

Purpose: The purpose of this study was to determine reliability and validity of the Postural Assessment Scale for Stroke Patients (PASS) in chronic stroke patients. Methods: A total of 43 stroke patients, who had a stroke more than 6 months previously, participated in the study. Reliability was determined by the intra-class correlation coefficient (ICC$_{3,1}$), Bland and Altman method and Cronbach's alpha by internal consistency. Validity was examined by correlation the PASS scores to the Berg Balance Scale (BBS), Trunk Control Test (TCT), and Fugl-Meyer Balance (FM-B) score. Results: The intra-rater reliability and the Absolute reliability of the PASS was good ICC$_{3,1}$=0.97 (95%CI 0.95$\sim$0.99) and excellent SEM=1.01 respectively. Cronbach's alpha value for PASS was found to be 0.94. There were significant correlations between the PASS and BBS, TCT, FM-B (r=0.65－0.96, p<0.01). Conclusion: The PASS provide reliable and valid instrument of the postural control assessment for chronic stroke patients.

• 소성∙가공
• /
• 제26권1호
• /
• pp.28-34
• /
• 2017

Multi-pass shape rolling is performed to produce long products of arbitrary cross-sectional shapes. In the past, the multi-pass shape rolling process has been designed by the trial and error method or the experience of experts based on the empirical approach. Particularly, the design of roll caliber in shape rolling is important to improve product quality and dimensional accuracy. In this paper, the caliber design and pass schedule of multi-pass shape rolling were proposed for manufacturing piston ring wire. In order to design roll caliber, major shape parameter and dimension was determined by analysis of various caliber design. FE-simulation was conducted to verify effectiveness of proposed process design. At first, forming simulation was performed to predict shape of the product. Then, fracture of the wire was evaluated by critical damage value using normalized Cockcroft-Latham criteria. The experiment was carried out and the results are within the allowable tolerance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.427-430
• /
• 2005

Improving the productivity of steel cord is required due to the increase in demand for it, even though steel cord being used as a reinforcement of a tire has been produced at multi-pass wet wire drawing process over 1000m/min. To improve the productivity, if just increase drawing speed, it causes temperature rise, fracture arisen by embrittlement during drawing process. To increase drawing speed affecting productivity, the variation of wire temperature during multi-pass wet wire drawing process is investigated in this study. In result, the multi-pass wet wire drawing process is redesigned. The redesigned wet drawing process with 27 passes efficiently controls wire temperature during drawing process. It, therefore, enables drawing process to be possible at ultra high speed with 2000m/min. It becomes possible to improve the productivity of steel cord in this paper because the increase in drawing speed could be achieved.

• 디지털융복합연구
• /
• 제12권5호
• /
• pp.231-238
• /
• 2014

텍스트 기반 패스워드 인증의 문제점을 해결하기 위해서 이미지를 사용하는 그래픽 패스워드가 발전 하였다. 기본적으로 그래픽 패스워드는 화면에 보이는 이미지 위의 정확한 점의 위치를 순서대로 선택(클릭)하여 인증을 처리하는 방식이다. 이러한 기존의 그래픽 패스워드 방식은 화면상의 정확한 지점을 선택하여 클릭하지 못하면 인식에 실패한다. 본 논문에서는 이러한 단점을 개선한 신 개념의 그래픽 패스워드 방식인 PassPositions를 소개한다. PassPositions는 지금까지의 그래픽 패스워드 방식에서 사용하지 않았던 상대위치를 패스워드 생성에 사용한 신개념의 그래픽 패스워드 기법이다. PassPositions는 유니버설 디자인에 기반을 둔 그래픽 패스워드 기법으로 사용자의 신체적 조건에 관계없이 모두가 편리하게 사용할 수 있다.

• 한국전자파학회논문지
• /
• 제23권9호
• /
• pp.1065-1072
• /
• 2012

본 논문에서는 레이다 시스템의 수신단의 도파관 리미터와 대역 통과 여파기를 하나의 소자로 구현하는 방법을 제시하고자 한다. 먼저 대역 통과 여파 특성을 갖는 아이리스 구조를 제안하고 PIN 다이오드를 연결하여 도파관에 입사되는 전력의 크기에 따른 PIN 다이오드 바이어스 동작 특성에 따라서 각각 여파기와 리미터로 동작하는 구조를 설계하였다. 제작된 구조는 낮은 전력의 마이크로파가 입사하는 경우, 10 GHz에서 -0.7 dB의 삽입 손실을 갖는 통과 대역을 형성하는 여파기로, 높은 전력의 마이크로파가 입사하는 경우 대략 25 dB의 분리도를 갖는 리미터로 동작한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.176-179
• /
• 2005

The increasing demand for high density packaging technologies and the evolution to mixed digital and analogue devices has been the con-set of increasing research in thin film multi-layer technologies such as the passive components integration technology. In this paper, Cu and TaO thin film with RF sputtering was deposited for spiral inductor and MOM capacitor on the $SiO_2$/Si(100) substrate. MOM capacitor and spiral inductor were fabricated for L-C band pass filter by sputtering and lift-off. We are analyzed and designed thin films L-C passive components for band pass filter at 900 MHz and 1.8 GHz, important devices for mobile communication system. Based on the high-Q values of passive components, MOM capacitor and spiral inductors for L-C band pass filter, a low insertion loss of L-C passive components can be realized with a minimized chip area. The insertion loss was 3 dB for a 1.8 GHz filter, and 5 dB for a 900 MHz filter. This paper also discusses a analysis and practical design to thin-film L-C band pass filter.