• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.44-50
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the first one of the two companion papers, describes the similarity assessment methods using convex decomposition and FFD.

• 소성∙가공
• /
• 제16권8호
• /
• pp.575-581
• /
• 2007

The high dimensional accuracy of the cold forged part could be acquired by the accurate dimensional modification for the die, which is, the dimensional changes from the die through forged part to final part after heat treatment were considered. The experimental and FEM analysis are performed to investigate the dimensional changes from the die to final part on cold forged part, comparing with the machined gear. The dimension of forged part is compared with the die dimension at each stage, such as, machined die, cold forged part, and heat-treated-part. The elastic characteristics and thermal influences on forging stage are analyzed numerically by the $DEFORM-3D^{TM}$. The analyzed residual stress of forged part is considered into the FE-analysis for heat treatment using the $DEFORM-HT^{TM}$. The effects of residual stress affected into the dimensional changes could be investigated by the FEA. Each residual stress of gears was measured practically by laser beam type measurement.

• Industrial Engineering and Management Systems
• /
• 제8권1호
• /
• pp.66-71
• /
• 2009

This study proposes a new framework for designing disassembly methods. In recent years, environmental problems have become global issues. Recycling of used products or resources is recognized as a matter of significance since it may help reduce the risk of exhausting natural resources. Considering possible exhaustion of limited natural resources in the near future, reuse of products would gain more environmental significance. As yet, it relies hugely on manual disassembly, which labor cost places burden on the total recycling cost. The purpose of this study is to propose a methodology designing for manual disassembly works, and a creation method of a jig. By focusing on parts' connection and attachment relationship, parts are categorized in 5 categories (parent part, joint key part, attaching key part, child part, and independent part) according to the features that parts possess, and 3 kinds of connection relationships (parent part-joint key part connection, parent part-independent part connection and child part-child part connection) are clarified. Connection relationship and attachment relationship charts have also been created, and utilizing them, disassembly orders are settled, and a disassembly jig is devised. The proposed methodology is also applied to a real product and its work time is improved 42% form 31 to 13 seconds.

• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.97-105
• /
• 2023

The membrane structure should maintain the membrane materials in tension for structural stability guaranty. The anchoring part in the membrane structure is an important part. It has the function to introduce tension into membrane materials and function to transmit stress which membrane materials receives to boundary structure such as steel frames. In this paper, it grasps anchoring system of the anchoring part in the membrane structure concerning the fracturing characteristic condition of membrane structure, and the influence which is caused to yield it designates the stress state when breaking the membrane structure which includes the anchoring part and that stress transition mechanism is elucidated as purpose. This paper follows to previous paper, does 1 axial tensile test concerning the bolting part specimen, grasp of fracturing progress of the bolting part and the edge rope and hardness of the rubber, does the appraisal in addition with the difference of bolt tightening torque. As a result, the influence which the bolt anchoring exerts on the fracturing characteristics of the membrane material in the membrane structure anchoring part is examined.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권4호
• /
• pp.312-321
• /
• 2007

Purpose: Distraction osteogenesis has been applied to the maxillofacial implantology and good experimental and clinical results have been reported. However, histologic studies of implants placement on distraction osteogenesis of atrophic alveolar ridges are scarce. In this study, we compare the bone formation between in the transport part and in the distraction part by histomorphometric analysis. Materials & methods: Three adult beagle dogs were served as experimental subjects. The 2 premolars and 1st molar were extracted on the Lt. side of mandible in each beagle dog. After one month later, osteotomy was performed and distraction device was adapted. Distraction was performed with gradual incremental separation of two bone pieces at a rate of 1.0mm per day for 5 days. During consolidation phase, new bone was formed in the distraction zone between the separated bone pieces. 5 weeks after distraction phase, 3 implants were placed in each beagle dog. The implants were inserted through transport part and distraction part and inferior basal bone. The animals were sacrificed at 2 weeks, 4 weeks, and 12 weeks after implant placement. BIC and BA of implants on distraction part and transport part were measured histomorphometrically. Results: BIC, BA increased after implant placement as time goes by passes and new bone formation was slightly higher in transport part than in distraction part at 2 weeks, 4 weeks after implant placement. At 12 weeks after implant placement, BIC, BA of were 74%, 61% in transport part and 77%, 59% in distraction part, therefore there were no difference in BIC and BA between transport part and distraction part at 12 weeks after implant placement.

• 한국음향학회지
• /
• 제41권1호
• /
• pp.87-98
• /
• 2022

음악은 일상생활의 어려움과 스트레스를 축소함으로 노인의 삶의 질에 긍정적인 영향을 미친다. 본 연구는 한국 노인들을 대상으로 음악지각과 참여와 관련된 한국어판 삶의 질 설문지를 개발하고자 한다. 한국어판 음악관련 삶의 질 설문지(Korean version of Music-Related Quality of Life, K-MRQoL)은 음악능력, 태도, 활동빈도(Part 1)과 음악능력, 태도, 활동중요성(Part 2)으로 구성되었고 각 하위범주는 11문항으로 구성된 음악지각과 7항목으로 구성된 음악참여로 구성되었다. 복지센터와 양로원의 난청 노인30명과 정상청력 노인 30명을 대상으로 피어슨, 크론바크 알파 상관계수와 독립 t 검사를 측정하었다. K-MRQoL의 전체점수와 하위범주(Part 1)간의 상관계수는 .701에서 .948이었고 하위범주(Part 2)간의 상관계수는 .598에서 .926이었다. K-MRQoL의 전체점수와 하위범주(Part 1) 간의 내적일관성은 .846에서 .931이었고 하위범주(Part 2) 간의 내적일관성은 .838에서 .918이었다. K-MRQoL의 전체 점수와 하위범주(Part 1과 2)의 검사-재검사의 상관계수는 각각 .979, .970, .979이었다. K-MRQoL과 의사소통 삶의 질척도(Quality of Communication Life Scale, QCL)와의 상관관계는 .449이었다. K-MRQoL 전체점수와 하위범주(Part 1과 2)는 건청과 난청 노인 간 통계적으로 의미있는 차이를 보였다. 따라서 한국어판 음악관련 삶의 질 설문지는 건청과 난청노인의 음악관련 삶의 질을 심층적으로 살펴볼 수 있는 유용한 임상적 도구임을 나타낸다.

• Journal of Biosystems Engineering
• /
• 제28권2호
• /
• pp.89-96
• /
• 2003

This study was aimed to identify how the main body vibration of power tiller will be transmitted to the trailer, and to find out the basic information for demage reducing method of agricultural products during transportation. The vertical vibration acceleration level was measured at 6 positions, i.e. engine, hitch, seal and three parts of trailer (front middle, and rear) for the not driving but at the engine speeds of 1,000rpm and driving at 0.35m/s. The results of this research could be summarized as follows; 1. For not driving, the accumulated acceleration level up to 120Hz was 50% of total accelerations at engine part and those were 28~41% at other parts. Those up to 40Hz were 20~30% at engine and hitch part and 2~8% at trailer part. And those up to 20Hz were 13~20% at engine and hitch part and 1~4% at trailer part 2. For the driving with 0.35m/s at paved road, the average vertical accelerations were in the range of 0.005~0.058m/s$^2$. The lowest value of 0.005m/s$^2$ was showed at engine part and the value of 0.031-0.058m/s$^2$ was showed at trailer part. 3. For the driving with 0.35m/s, the accumulated value of average vertical accelerations showed the lowest value at engine parts md showed 5 times value of engine part at trailer part especially highest value at middle part of trailer. 4. For the driving with 0.35m/s, the accumulated acceleration level up to 120Hz was 75% of total accelerations at engine part and those were 20~42% at other parts. Ant those up to 20Hz and 40Hz were 24~26% at engine part and 0.1~0.6% at trailer part.

• 대한한방부인과학회지
• /
• 제28권3호
• /
• pp.40-53
• /
• 2015

Objectives The purpose of this study is to report the gynecologic use of Angelicae Gigantis Radix in uterus and gynecology part of Dongeuibogam. Methods I searched prescriptions containing Angelicae Gigantis Radix in uterus and gynecology part of Dongeuibogam and analyzed the selected prescriptions to research the use of Angelicae Gigantis Radix in uterus and gynecology part of Dongeuibogam. Results Prescriptions containing Angelicae Gigantis Radix are utilized for 10 disease patterns in uterus part. The number of prescriptions containing Angelicae Gigantis Radix is 50 in uterus part. Prescriptions containing Angelicae Gigantis Radix are utilized for 29 disease patterns in gynecology part. The number of Prescriptions containing Angelicae Gigantis Radix is 90 in gynecology part. Angelicae Gigantis Radix was taken as a sovereign, minister drug of prescriptions containing Angelicae Gigantis Radix of uterus and gynecology part. In many prescriptions, Angelicae Gigantis Radix is used in the treatment of amenorrhea and dysmenorrhea in uterus part. Prescriptions containing Angelicae Gigantis Radix are used to treat not only female infertility but also male infertility in gynecology part. The Samul-tang is the most useful prescription which contains Angelicae Gigantis Radix. Conclusions Angelicae Gigantis Radix is an effectual medicinal herb for menstrual disease, vaginal discharge, pregnancy disease, postpartum disease. So I consider that it is necessary to study methods which improve convenience and effect of prescriptions containing Angelicae Gigantis Radix.

• 산업노동연구
• /
• 제17권1호
• /
• pp.325-350
• /
• 2011

이 글은 영국의 시간제 근로의 특징과 그 제도적 맥락을 분석하고 있다. 노동시장에 대한 규제와 여성의 노동시장 참여에 대한 지원이 낮은 영국에서는 시장주도의 시간제 활용이 일찍부터 발달했다. 시간제 근로는 영국 취업 여성의 40 퍼센트를 차지할 정도로 특히 기혼 여성들의 주요한 일자리이다. 시장의 역할과 개인의 선택이 강조되는 영국에서 시간제 일자리는 고용주 주도의 시장의 유연성에 기여하는 방식으로, 그리고 여성들이 일과 가족 사이에서 시간제 근로를 통해 여성들 자신의 노동시간을 조정하는 주요 수단으로서 작동했다. 그러나 1997년 이후 영국에서는 제도적 개입을 강화하는 변화가 있었고, 시간제 근로를 기혼 여성을 위한 제한적 일자리로부터 보편적 유연근로로 변화시키려는 법적, 제도적 노력이 있었다. 이러한 변화는 시간제 근로에 대한 불이익은 원칙적으로 시정할 수 있게 되었으나, 여전히 이해당사자들 사이의 집합적 해결방식보다는 개별 근로자와 고용주 사이의 개인화된 해결방식으로 영국이 접근함으로써 여성들의 고용패턴, 그리고 시간제 근로의 질적 성격에 큰 변화는 나타나지 않았다.

• 한국CDE학회논문집
• /
• 제11권4호
• /
• pp.303-314
• /
• 2006

The exchange of CAD (Computer Aided Design) models between different CAD systems and to downstream applications such as manufacturing has become very important to modem industry. One serious current issue is that the process cannot automatically import existing 3-D solid models in a variety of commercial CAD formats into the process without manually re-mastering the model in current standard including "SIEP AP(Application Protocol) 203 Edition 1" To fully integrate technical data from the design agency to the shop floor, design intent and validated 3D geometry of feature based parametric CAD model should be brought into the standardized processes. To overcome this limitation, AP203 Edition 2 (Ed.2) and its related STEP parts such as Part55, Part108, Part109, Part111 and Part112 are starting to be available to handle this problem. The features in Part111 are harmonized with the machining features available in AP224. This paper is focused on two mapping technologies: CAD to Part111 mapping and Pat111 to AP224 mapping including case studios and it will provide the guideline about what should be done next in the AP203 Ed.2 to AP224 mapping. The final goal of this project is to integrate technical data from CAD to AP224 based manufacturing information through AP203 Ed.2.