• Journal of the Korean housing association
• /
• v.6 no.2
• /
• pp.43-49
• /
• 1995

The purpose of this study is to find out the relation between the outdoor activity and independent behavior of infant and the physical charater of the intermediate-territory. Another purpose is to find out the estimate of infant's mother to the intermediate-territory as the space of the infant's outdoor life. As the result of this study, the following points are confirmed: 1) The outdoor activity, cognition, independent behavior of infant is affected by the physical character of the intermediate-territory. 2) The time and frequency of outdoor activity is affected bu the physical character of the intermediate-territory. 3) The cognition and the boundary of outdoor activity are affected by the physical character of the intermediate-territory. 4) The time of independent behavior is affected by the physical character of the intermediate-territory. 5) The estimate of infant's mother to the intermediate-territory as the space of infant's activity is very bad. The physical environment of intermediate-territory is very poor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.234-234
• /
• 2008

Chemically homogeneous $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) sols were synthesized using barium acetate, strontium acetate, and titanium isoproxide as starting materials. BST thin films of thickness 340 nm were deposited on Pt/$TiO_2/SiO_2$/Si and alumina substrates using spin coating method. The technique used for the processing of these films was Ultraviolet (UV) sol-gel photoannealing, using phto-sensitivity precursor solutions and UV-assisted rapid thermal processing(UV-RTP). The crystallization behaviour of the BST sols and thin films was studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). Variation of permittivity and dielectric loss were measured in LCR-meter, model HP 4394A.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.63.1-63.1
• /
• 2010

CQUEAN (Camera for QUasars in EArly uNiverse) is a newly developed camera system by CEOU optimized at 0.8 - $1.1{\mu}m$ wavelength region. From Aug. 10 to Aug. 17, 2010, the camera was installed at 2.1m Otto Struve telescope at McDonald Observatory, USA, and engineering test observation was performed. We obtained the data for the characteristics of camera and scientific purpose using 7 filters (g, r, i, z, Is, Iz, Y). For the purpose of discovery of z - 5~6 quasar, we specially used new filters (Is,Iz). During the test observation, we obtained the data of Gamma-Ray Burst, high redshift quasars, high redshift quasar candidates and other calibration data. We present general characteristics of the reduced data taken with CQUEAN and show the performance of the camera.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.49.2-49.2
• /
• 2018

Flux calibration for narrow band photometric data gives us an opportunity to get a line flux of extended targets. We developed flux calibration processes for narrow band photometry using broad band filters as a continuum indicator. We derived parameters for color correction and zero point correction including color terms. Applying our method, we successfully subtracted continuum emissions and calibrated the emission lines from an FU Ori type object, V960 Mon.

• Bulletin of the Korean Mathematical Society
• /
• v.44 no.4
• /
• pp.795-806
• /
• 2007

We investigate F-traceless component of the conformal curvature tensor defined by (3.6) in $K\ddot{a}hler$ manifolds of dimension ${\geq}4$, and show that the F-traceless component is invariant under concircular change. In particular, we determine $K\ddot{a}hler$ manifolds with parallel F-traceless component and improve some theorems, provided in the previous paper([2]), which are concerned with the traceless component of the conformal curvature tensor and the spectrum of the Laplacian acting on $p(0{\leq}p{\leq}2)$-forms on the manifold by using the F-traceless component.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2014-2016
• /
• 2002

Liquid crystal displays(LCDs)의 스위칭 소자로써 thin film transistors(TFTs)를 적용하기 위해서 저온 공정이 가능하도록 molybdenum 금속을 게이트에 사용하여 저온 다결정 TFTs 소자를 제작하였다. 또한, 채널 길이 방향으로 결정을 성장시켜 결정립이 큰 다결정 실리콘을 얻을 수 있는 sequential lateral solidification(SLS) 결정화 방법을 사용하였다. SLS-TFT 소자를 $2{\mu}m$에서 $20{\mu}m$까지의 다양한 채널 길이와 폭으로 제작한 후 각 소자들의 I-V 특성 곡선과 소자의 물성 분석을 위해 필요한 변수들을 구하여 이들의 전기적인 특성을 비교, 분석하였다. 제작된 소자들로부터 측정된 이동도는 $100{\sim}400Cm^2$/Vs, on/off 전류비는 약 $10^7$, off-state 전류는 약 $100{\times}10^{-12}A$로 대체적으로 우수한 특성을 보였다.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.2
• /
• pp.111-115
• /
• 1991

The green alga, Dunaliella salina under fed-batch cultivation produced 51.12 mg of hydrocarbon per liter with maintaining 0.313 (g dry wt/l). About 20% of hydrocarbon production yield based on dry biomass was obtained from both batch and fed-batch processes. Optimum culture conditions of light intensity, pH and salt concentration were obtained as 0.0080 (kJ/$cm^2$/h), 8.0 and 1.4 (g of NaCl/l), respectively by response surface analysis. The production of hydrocarbons in D. salina was closely correlated to cell growth. Fed-batch cultivation produced more hydrocarbons and maintained better cell growth than a batch process.

• Journal of Veterinary Clinics
• /
• v.26 no.5
• /
• pp.401-407
• /
• 2009

In the previous article in this series we introduced the basic concepts for statistical analysis. The present review introduces hypothesis testing for continuous and categorical data for readers of the veterinary science literature. For the analysis of continuous data, we explained t-test to compare a single mean with a hypothesized value and the difference between two means from two independent samples or between two means arising from paired samples. When the data are categorical variables, the $x^2$ test for association and homogeneity, Fisher's exact test and Yates' continuity correction for small samples, and test for trend, in which at least one of the variables is ordinal is described, together with the worked examples. McNemar test for correlated proportions is also discussed. The topics covered may provide a basic understanding of different approaches for analyzing clinical data.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.160-168
• /
• 1994

This was studied about mechanical characteristic of AC4A/SiCw 10-30% reinforced composites. Tensile strength of pressed base metal(base metal) with SiCw preform was higher than without pressed base metal(AC4A). If SiCw whisker volume fraction was increased, tensile strength at room temperature was increased. And tensile strength of SiCw 30% was about $35kg/mm^2$. Tensile strength of SiCw 30 % $400^{\circ}C$ at same time aging was the most excellence, about $40kg/mm^2$. The fracture energy value of composite material at three point bending test was higher than AC4A. Dislocation at matrix of composite material was evenly distributed. But dislocation around whisker of composite material was more existed than matrix. The reasom was thought of pile-up around whisker.

• Journal of Food Hygiene and Safety
• /
• v.8 no.4
• /
• pp.251-254
• /
• 1993

Extraction and Clean-up procedures coupled with quantitation by high performance liquid chromatography(HPLC) was evaluated for the detection of 4 aflatoxins, B1, B2, G1 and G2, in peanut butter. The Sep-pak clean-up method showed poorer separation and repeatability than did the modified DeVries' and an immunoaffinity column clean-up methods. No significant difference of detected aflatoxins between the affinity column clean-up and modified DeVries' method. The coefficients of variation for the 4 aflatoxins were ranging from 6.3∼32.3 by the modified DeVries' method and 5.3∼9.8 by the affinity column clean-up.