• Pediatric Infection and Vaccine
• /
• v.17 no.2
• /
• pp.101-107
• /
• 2010

Purpose : In evaluation of patients, laboratory results are crucial in determination of a treatment plan. Obtaining venous blood from infants and children is a difficult procedure. Substitution of a capillary blood sample for a venous blood sample has been suggested. However, there are few studies showing mutual correlation between C-reactive protein (CRP) results in capillary and venous blood. This study was designed to determine whether the result of the capillary sample is the same as the result of the venous blood sample. Methods : After informed consent, a pair of venous and fingertip capillary blood samples were simultaneously collected from 100 children. The LC-178CRPTM was used for analysis of capillary blood and the Hitachi 7180 automatic hematology analyzer was used for analysis of venous blood. We compared CRP of both venous and capillary blood samples. Results were analyzed by crosstabulation analysis, simple regression analysis and the Bland Altman Plot method. Results : A close correlation (90.63%) was observed between capillary and venous blood analyzed by crosstabulation analysis. CRP results were similar between the two groups and showed a high coefficient correlation ($\beta$=1.3434, $R^2$=0.9888, P<0.0001) when analyzed by a simple regression model. The average value in venous blood was also higher compared to capillary blood. According to Bland Altman Plot analysis, lab results were measured at a 95% confidence interval. Conclusion : CRP results from capillary blood showed close correlation with venous blood sampling. At present, venous blood sampling is the preferred method. However, due to difficulty in venous blood sampling, capillary sampling could be considered as an alternative technique for use with children.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.2
• /
• pp.111-131
• /
• 1998

The migmatitic gneiss in the Odesan Gneiss Complex has small amount of quartzite, amphibolite and marble and the Kuryong Group which contact with migmatitic gneiss unconformitly, also contains some amphibolite. Preview studies of this area had regarded that the amphibolites contact with marble had been produced by metasomatism from the pelitic and calcareous sediments mixtures, but the amphibolite is reinterpreted as igneous origin. $SiO_2$ content of the amphibolite is 45.9~52.7 wt%, which corresponds to basaltic composition. MgO content has narrow range (4.6~6.87 wt%) and major and trace element are plotted against MgO,$TiO_2, P_2O_5$, Hf, Zr are reduced and Cr and Ni are increased their content with increasing MgO. This phenomenon indicates that the basaltic magma as the protolith of the amphibolite had frationated with the crystallization of the pyroxene and/or olivine. REE pattern has smoothly decrease from LREE to HREE. Eu/Eu(0.83~1.19) show the flat Eu anomaly, which indicate small fractional crystallization of plagioclase. HREE is enriched in the garnet-bearing amphibolites. Several discrimination diagram for the basaltic magma show that the amphibolite of the study area is originated tholeiitic basaltic magma indicating continental rift environment. Due to determine the metamorphic condition garnet-hornblende geothermometry and hornblende-plagioclase geobarometry are used. Peak metamorphic temperature range of the amphibolite $788~870^{\circ}C$ and is deduced toward the northeastern part. The calculated temperature from the amphibolite has slightly higher than the temperature of the metapelites but the trend of metamorphic grade which decrease from western to eastern part progradly is similar to each other. The metamorphic pressure calculated by garnet- hornblede-plagioclase geobarometry is 4~5kb. But ilmenite-plagioclase pair enclosed in garnet show 8 kb at $700^{\circ}C$ by garnet-ilmenite-rutile-plagioclase geobarometery. The zonal profile of garnet in sample 84 shows the bell-shape profile, which grossular content decreases whereas pyrope content increases progressively. This means that the amphibolite has undergone the clockwise P-T-t path which is shown in the migmatitic gneiss of the Odesan Gneiss Complex.

• Journal of Science Education
• /
• v.38 no.2
• /
• pp.302-316
• /
• 2014

The purpose of this study is to devise a Small-Scale Chemistry (SSC) lab program for primary school learners and to examine its effects on science learning achievement. In addition, it will be examined whether the type of learning groups affects the achievement or not. The participants in the current study were 173 6th graders from 6 classes of Y elementary school in Changwon city, Gyeongnam. Three classes(86) were assigned to the experimental group and the other three, the comparative group after checking the pre-homogeneity between the two groups through t-test on the scores of the science mid-term exam. We conducted five experimental sessions on the Acid and Base in the science textbook for the sixth graders. The students of one experimental class worked in pairs and another class worked individually, but the students of the comparative classes were divided into groups of six(one group with pair, another group with individual work in the SSC program, and the other group conducting the traditional experiment with groups of six students). The data were analyzed by t-test and ANOVA. The results showed that experimental learning using individual work in the SSC program compared to traditional experimental learning was effective in improving science learning achievement. also it was indicated that the teachers could reduce their burden of preparing for classes and of school hours when they utilized the SSC laboratory learning program. Teachers could also actively support students' experimental activities in employing the program. Based on the results, we suggest that the development of the SSC laboratory learning program is meaningful in the sense that this program can help elementary schoolers to improve science learning achievements more than the existing traditional experimental methods.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2018

$^{68}Ga$ was eluted from a $^{68}Ge/^{68}Ga$ radionuclide generator. $^{68}Ga$ decays into $^{68}Zn$, with a half life=67.8min. The decay is 88.9 % by ${\beta}$+ and 11.1 % by EC. The main ${\beta}$+ decay (87.7 %) is to the ground level of $^{68}Zn$ and it is a pure positron emission branch. A small fraction decays ${\beta}$+ (1.2 %) into an excited level of $^{68}Zn$, which promptly decays into the ground level with a ${\gamma}$ (1.077 Mev). This can constitute prompt gamma contamination in the PET data, if the 1.077 Mev ${\gamma}$ has a scatter interaction in the patient, and generates a lower energy ${\gamma}$ in coincidence with the positron annihilation pair. The purpose of this study was to evaluate standardized uptake value(SUV) before and after applying prompt gamma rays correction on $^{68}Ga$-DOTATOC PET/CT image. Fifty patient underwent PET/CT 1 hour after injection of the $^{68}Ga$-DOTATOC. The SUVmax and SUVmean of lesions and normal tissues (Pituitary, Lung, Liver, Spleen, Kidney, Intestine) were evaluated before and after applying prompt gamma correction on $^{68}Ga$-DOTATOC PET/CT image. Additionally, the SUVmax of each lesions and SUVmean of the soft tissues were measured on images. and target to background ratios (TBR) were calculated as quantitative indices. Among 15 patients, 25 of lesions (Pancreas, Liver, Thoracic Spine, Brain) with increased uptake on $^{68}Ga$-DOTATOC PET/CT image. SUVmax and SUVmean were increased in lesion site and normal tissue after prompt gamma rays correction. TBR was $51.51{\pm}49.28$ and $55.50{\pm}53.12$ before and after prompt gamma rays correction, respectively. (p<0.0001)

• Journal of Plant Biotechnology
• /
• v.40 no.1
• /
• pp.18-26
• /
• 2013

Genetically modified (GM) rice Agb0101, which expresses the insecticidal toxin modified cry1Ac (mcry1Ac1) gene, was developed by the Rural Development Administration in Korea. To monitor the probable release of Agb0101 in the future, it is necessary to develop a reliable detection method. Here, we developed the PCR detection method for monitoring and tracing of GM rice. The primer pair (RBEgh-1/-2) from a starch branching enzyme (RBE4) gene was designed as an endogenous reference, giving rise to an expected PCR amplicon of 101 bp. For the qualitative PCR detection, construct- and event-specific primers were designed on the basis of integration sequence of T-DNA. Event-specific PCRs amplified specifically 5'- or 3'-junction region spanning the native genome DNA and the integrated gene construct, while none of amplified product was shown on crops, rice varieties, and other insect-resistant transgenic rice lines. The event-specific real-time PCR method was performed using TaqMan probe and plasmid pRBECrR containing both rice endogenous gene RBE4 sequence and 5'-junction sequence as the reference molecule. The absolute limit of quantification (LOQ) of real-time PCR was established with around 10 copies for one plasmid molecule pRBECrR. Thereafter, the different amounts of transgenic rice (1, 3, 5, and 10%, respectively) were quantified by using the established real-time PCR method, with a range below 19.55% of the accuracy expressed as bias, 0.06-0.40 of standard deviation (SD) and 3.80-7.01% of relative standard deviations (RSD), respectively. These results indicate that the qualitative and quantitative PCR methods could be used effectively to detect the event Agb0101 in monitoring and traceability.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.59-77
• /
• 2000

This study was carried out to investigate on several factors, which contaminative the water quality through the water pipe during feeding water, in 42 largescaled apart-ments(total 84 cases) and assayed the Volatile Organic Compounds(VOCs) and concen-tration of heavy metals that inflow and outflow in reservior water in Jeonnam area(Mokpo, Suncheon, Yeosu) from January 1999 to December 1999. The results obtained were summarized as follows ; 1. The quality of the water pipe composition in the order of frequency in the quality of water pipes were Copper(45.2%)> Zinc(38.9%)> Stainless steel(9.5%)> PVC(4.8%)> PM(2.4%) in observing 42 sites. All of the drain pipes were used the cast iron quality. 2. The result of certification curve from 12 items(17kind) of VOCs was $1.0-4.0{\mu{g}}/{\ell}$ range, a coefficient of correlation was shown 0.99 over. A MDL of each substance range was within $0.1-1.0{\mu{g}}/{\ell}$. 3. The result of the assay, 5 kinds(Viny chloride, Dichloromethane, Ethylbenzene, M,P-xylene, Styrene) of the VOCs of 14 kinds was not detected and the other items were detected slightly. The detection rate of one item and over in total VOCs samples, were 25.9% in inflow and 27.9% in outflow. And frequency of detect in inflow/outflow of THM(Chloroform, Bromodichloro-methane, Dibromochloromethane, Bromoform) were shown higher than 94.1%, 97.0% each stages. It comes to the conclusion that all of the samples were reason able for drinking water standards. 4. The coefficient of correlation were reasonable, it shown 0.999 over in $0.1-1.0{\mu{g}}/{\ell}$ of a measuring range conditions of 4kinds in organic substance(Zn, Cu, Fe, Mn). 5. The results were showed suitability in 78 cases(92.9%) and unsuitability in 6 cases (7.1%), in 84 cases of in organic substances. Compare to inflow stage, mean concentrations of heavy metal, were increased slightly in Zn, Cu, Fe except Mn than outflow stage. The result of the mean concentration in organic substance inflow and outflow in the apartment water tank using Pair-compared T-test, in 95% reliance index, were $0.179mg/{\ell}(0.151-0.307mg/{\ell})$ in Zinc, $0.136mg/{\ell}(0.113-0.230mg/{\ell})$ in Copper, $0.052mg/{\ell}(0.048-0.098mg/{\ell})$ in Fe, and there was a bit growing tendency but there was no differece in Mn. 6. The mean concentration of Copper which used Cu pipe as a water supply pipe in apartment were $0.216mg/{\ell}(0.161-0.338mg/{\ell})$ in case of the Zine pipe were $0.286mg/{\ell}(0.204-0.435mg/{\ell})$. It shows that the detection rate was more higher than the other material used in Cu or Zn as the water supply pipe. We supposed to Cu and Zn substance were gushing out water supply pipe.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1464-1469
• /
• 1998

SOS Chromotest and Ames test were carried out to evaluate the mutagenicity of three chloropropanols. In the SOS Chromotest, 3-monochloro-l,2-propanediol (3-MCPD) and 2,3-dichloro-1-propanol (2,3-DCP) except for 1,3-dichloro-2-propanol (1,3-DCP) induced SOS response in Escherichia coli PQ37 with dose-response relationship and 2,3-DCP was far more genotoxic than 3-MCPD. The genotoxic activities of both compounds, however, were very lower in E. coli PQ35 (PQ37 $uvrA^+)$ as compared to them in E. coli PQ37, whereas much higher in E. coli PQ243 (PQ37 tagA alkA). These results indicate that there are at least two types of DNA lesions caused by these compounds; one is a excision-repairable and the other is 3-methyladenine or any similar lesion which is excision-unrepairable and can induce adaptive response. In Salmonella typhimurium TA100, all the compounds showed strong mutagenicities, establishing the following genotoxic order: 2,3-DCP>3-MCPD>1,3-DCP. But the mutagenic activities were very low in S. typhimurium TA98 and TA97a. These results suggest that the mutation by chloropropanols can be induced by the DNA lesions causing base-pair substitutions. From the result that the mutagenicities of 3-MCPD and 2,3-DCP in S. typhimurium TA1535 were very low as compared to those in S. typhimurium TA100, it was appeared that the mutations by both compounds necessitate error-prone SOS repair.

• Journal of the Korean Society of Costume
• /
• v.15
• /
• pp.177-194
• /
• 1990

Koh(袴) was a type of dress worn on the lower part of the body which was commonly used in the Northeast Asia. It was originally used by the Northern race for the need of nomadism or hunting. The origin of the Koh which appeared in the area would be found from the trousers of the Huns who influenced in the Northeast Asia, and became in the part of the Scythian culture. The Scythians are the nomadizing race inhabited in the Northern Caucasas on the wast of the Black Sea and influenced on the inland Eurasian steppe as the first typical horse-riding race. The objectives of Koh which had been worn in the Scythian, Mongolia, Korea as well as Japan as a part of Dongho dress and ornaments and to contemplate the transmission process by cultural exchange among different races for the period from 4th century to 7th century. 1. The Origination of the Koh The Koh was originated by the environmental factor to protect the cold in the North but also from the heat in the South, and was changed and developed as gradually satisfying to the needs of the times. In the Northeast Asia the Koh was in the class of the Northern Chinese garment, and was used widely by the horse riding Scythians who moved widely from the Eurasian inland to Japan. The oldest original which could reflect the type of the Northern clothes was a pair of trousers discovered in the Huns remains of Noin Ula. This showed the exact form of hunting clothes and had a similar form with the Korean female tro-users. Since the same form of trousers drawn on the wall painting of which was excavated 4-5th century ancient Koguryo(高句麗) tomb was the same form the trousers of Noin Ula seemed to be the original form of Koh in the Northeast Asia. 2. The Chinese Trousers It was the time of the King Mooryung(武靈王) in the Cho(趙) Dynasty B.C. 3th century that the trousers used regularly in China. However, the Koh had been used as undergarment which functioned for the protection of the cold not the horseriding garment. The trousers seemed to be not very obviously shown off since the Poh (袍) was long, but mainly used by the people from lower class. As people learned the adapted the trousers. It was essential for the times of war and quarrel. The king himself started wearing the Koh. The Chinese trousers were influenced by the Huns, the Northern clothes of the Scythian culture, and similar to the Korean clothes. 3. The Korean Trousers Korean was a race bared from the Eastern foreign group. It was obvious that the clothes was Baji-Jeogori(바지 저고리), the garment of the Northern people. This had the same form of the Scythian dress and ornaments which was excavated from the Mongolian Noin Ula. The Scythian dress and ornaments were influenced from the Ancient West Asia Empire and transmitted to the Northeast Koguryu by the horseriding Scythian. The trousers were kept in the traditional style by the common people in Korea were transmitted to Japan which were for behind in cultural aspect, as well as got used to the Chinese as the efficient clothes though active cultural exchange. 4. The Japanese Trousers The ancient Japanese clothes were influenced by the Southern factor but not the form of the Koh. As the Korean people group was moving towards Japan and conquer the Japanese in the 4-5th century, however, North Altaic culture was formed and at the same time the clothes were also developed. The most influenced clothes at this time were those of Baekge(百濟) and the trousers form called Euigon became the main form. Because of the climatic regional factor, it was tied not at the ankle but under the knee. From the view the ancient Japanese clothes disappeard about that time, it could be due to the conquest of the culturally superior race but not the transmission of the culture. In the latest 7th century both the Chinese and Japanese dress forms were present, but the Dongho(東胡) dress and its ornament from Korea was still the basic of the Japanese dress form.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2015

The purpose of the Monte Carlo simulation study was to provide the optimized nozzle design to satisfy the beam conditions for biomedical researches in the Korean heavy-ion accelerator, RAON. The nozzle design was required to produce $C^{12}$ beam satisfying the three conditions; the maximum field size, the dose uniformity and the beam contamination. We employed the GEANT4 toolkit in Monte Carlo simulation to optimize the nozzle design. The beams for biomedical researches were required that the maximum field size should be more than $15{\times}15cm^2$, the dose uniformity was to be less than 3% and the level of beam contamination due to the scattered radiation from collimation systems was less than 5% of total dose. For the field size, we optimized the tilting angle of the circularly rotating beam controlled by a pair of dipole magnets at the most upstream of the user beam line unit and the thickness of the scatter plate located downstream of the dipole magnets. The values of beam scanning angle and the thickness of the scatter plate could be successfully optimized to be $0.5^{\circ}$ and 0.05 cm via this Monte Carlo simulation analysis. For the dose uniformity and the beam contamination, we introduced the new beam configuration technique by the combination of scanning and static beams. With the combination of a central static beam and a circularly rotating beam with the tilting angle of $0.5^{\circ}$ to beam axis, the dose uniformity could be established to be 1.1% in $15{\times}15cm^2$ sized maximum field. For the beam contamination, it was determined by the ratio of the absorbed doses delivered by $C^{12}$ ion and other particles. The level of the beam contamination could be achieved to be less than 2.5% of total dose in the region from 5 cm to 17 cm water equivalent depth in the combined beam configuration. Based on the results, we could establish the optimized nozzle design satisfying the beam conditions which were required for biomedical researches.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.380-387
• /
• 2001

The characteristics of ecological niche, breadth and overlap, for seventeen major tree species were evaluated in the natural deciduous forest in Mt. Chumbong area. Employed by the plot sampling method, the environmental gradient for vertical niche was based on the intensity of light within the forest, and that for horizontal niche was based on multi-dimensional resources in distribution pattern. The result showed that Fraxinus rhynchophylla had the highest value of vertical niche breadth and Maackia amurensis had the lowest, and Acer pseudo-sieboldianum had the highest value of horizontal niche breadth and Betula costata had the lowest. There was no significant correlation between both measures of niche breadth. However, the tolerance index for each species was positively correlated to the values of niche breadth. Spearman's rank correlation coefficients were applied to test the correlationship between the species ranks of tolerance index and those of two ecological niche breadths. The coefficient of $r_s=0.432$ ($P{\leq}0.1$) was not enough to support significant correlationship between the tolerance index and vertical niche breadth at the 95% probability. If Carpinus cordata, rarely reach canopy of the forest due to its own growth form, are excluded from the analysis, coefficient was calculated as $r_s=0.650$ ($P{\leq}0.01$), resulting in highly significant correlationship. The Spearman's rank correlation coefficient was $r_s=0.797$ ($P{\leq}0.01$) for tolerance indices and the values of horizontal niche breadth, indicating highly significant. Four distinctive species groups, produced by cluster analysis on the basis of ecological niche overlap for each pair of species, were in considerable accord with the positively associated species constellation pattern created by the inter-species association analysis.