• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.687-698
• /
• 2001

This paper presents a three dimensional stacked pad area away (PAA) package configuration as an implementation method of radio frequency (RF) circuits. 224MHz RF circuits of intelligence traffic system(ITS) were constructed with the stacked PAA RF pakage configuration. In the process of manufacturing the stacked PAA RF pakage, RF circuits were partitioned to subareas following their function and operating frequency. Each area of circuits separated to each subunits. The operating characteristics of RF PAA package module and the electrical properties of each subunits were examined. The measurement of electrical parameters for solder balls which were interconnects for stacked PAA RF packages showed that the parasitic capacitance and inductance were 30fF and 120pH, respectively, which might be negligible in PAA RF packaging system. HP 4396B network/spectrum analyzer revealed that the amplification gain of a receiver and transmitter at 224 MHz was 22dB and 27dB, respectively. The gain was 3dB lower than designed values. The difference was probably generated from fabrication process of the circuits by employing commercial standard

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.566-571
• /
• 2003

Hydroxyapatite (HAp)/Polyacrylic Acid(PAA) homogeneous composites of four different composition ratio were preparation by co-precipitation process with synthetic HAp and PAA as a binder. HAP/PAA composites were molding by cold isostatic pressing and were sintering by various condition in air. Crystallinity and structure of sintered HAp/PAA composites were investigated by XRD and FT-IR. Also, the compressive strength and the fracture surface of sintered specimens were measured by UTM and SEM. HAp/PAA composites were showed phase transformation of partially ${\alpha}$, ${\beta}$-tricalcium phosphate at sintering condition of 1200$^{\circ}C$ and 3 h. The pore size and porosity of sintered body were showed the range of 0.2∼3.0 $\mu\textrm{m}$ and 0.49∼13.43%, respectively. The compressive strength of sintered specimens were appeared the range of 36.6∼58.2 MPa. From these results, the sintered HAp/PAA comosites can be accounted for the microporous HAp having a good compressive strength due to homogeneous pore morphology.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.77-84
• /
• 2008

The thermal properties, morphology, mechanical properties and gas permeability of the blends of poly (amic acid) (PAA) and poly (o-hydroxyamides) (PHAs) having pendant group was investigated. The 5% weight loss and major weight loss of the b)ends occurred in the ranges of $348{\sim}407^{\circ}C$ and $589{\sim}615^{\circ}C$ upon a heating process. After a thermical annealing, the tensile strength and initial modulus of blends increased $3.7{\sim}52.9%$ and $34.4{\sim}70%$ from the value of pure PAA, respectively. Especially the tensile strength and modulus of the PAA/MP-PHA=9/1 showed the highest values (97.5 MPa and 2.67 GPa, respectively), which were 53 and 70% higher than those of pure PAA. The fine PHA domains were found to be uniformly dispersed. The interfacial adhesion between PAA and PHA was identified to be good. The gas permeabilities of PAA/M-PHA blend increased with M-PHA contents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.868-877
• /
• 2013

This paper will provide the cloud service based on PaaS that can enhance reusability of development in the cloud computing environment. The cloud service based on PaaS is the cloud service of platform in the side of development, which provide the reusable framework service that is beyond the existing development tool or management tool service. This reusable framework service will be enhanced reusability using a variety of distributed services.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.51-55
• /
• 2008

To develop a novel metformin HCl-loaded GR type tablet, various tablets were compressed with poly acrylic acid (PAA) and hydroxypropylmethyl cellulose (HPMC) using a wet granulation, and their physical properties such as swelling rate, hardness and dissolution were then investigated. Among the formulae tested in this study, the tablet prepared with PAA 971 and 974 as disintegrants showed fastest dissolution rate and swelling rate. Furthermore, the tablets prepared with PAA and HPMC improved the swelling rate, hardness and dissolution compared to those prepared with only HPMC. Our results suggested that the tablets prepared with PAA 971, 974 and HPMC might be a potential candidate for gastric retention type tablets.

• Archives of Pharmacal Research
• /
• v.28 no.5
• /
• pp.612-618
• /
• 2005

A mucoadhesive microsphere was prepared by an interpolymer complexation and solvent evaporation method, using chitosan and poly(acrylic acid) (PAA), to prolong the gastric resid ence time of the delivery system. The Fourier transform infrared results showed that microspheres were formed by an electrostatic interaction between the carboxyl groups of the PAA and the amine groups of the chitosan. X-ray diffraction and differential scanning calorimetry analysis showed that the enrofloxacin in the chitosan-PAA microsphere was molecularly dispersed in an amorphous state. Scanning electron microscopy of the surface and the quantity of mucin attached to the microspheres indicated that chitosan-PAA microspheres had a higher affinity for mucin than those of chitosan alone. The swelling and dissolution of the chitosan-PAA microspheres were found to be dependent on the pH of the medium. The rate of enrofloxacin released from the chitosan-PAA microspheres was slower at higher pH; therefore, based on their mucoadhesive properties and morphology, the chitosan-PAA microspheres can be used as a mucoadhesive oral drug delivery system.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.3
• /
• pp.184-194
• /
• 2023

In this study, we investigated whether p-anisaldehyde (PAA), the main component of essential oils derived from anise seeds, influences the differentiation of mouse C2C12 myoblasts. Cells were induced to differentiate over 5 days using a differentiation medium with or without PAA (50 or 200 mg/mL). Myotube length and diameter were measured, and the expressions of myogenic markers (myoblast determination protein 1, myogenin, myocyte enhancer factor 2, muscle creatine kinase, and myosin heavy chain) and atrophy-related genes (atrogin-1 and muscle ring finger-1 [MuRF-1]) were assessed by quantitative real-time polymerase chain reaction. Additionally, protein kinase B (Akt) phosphorylation was monitored by western blotting. PAA significantly induced the formation of smaller and thinner myotubes and reduced myogenic marker expression. Furthermore, PAA increased the expressions of atrogin-1 and MuRF-1 and simultaneously reduced Akt phosphorylation. Our findings indicate that PAA inhibits the myogenic differentiation of C2C12 cells by reducing the phosphorylation and activation of Akt.

• Journal of the Korean Chemical Society
• /
• v.38 no.11
• /
• pp.792-799
• /
• 1994

The spectral changes of 3,3'-diethyl oxacarbocyanine(DOC) in the aqueous solution and in the presence of polyacrylic acid(PAA) were studied by means of absorption and fluorescence spectroscopy. The spectral change of DOC in the aqueous solution with concentration changes is attributed to the formation of dimer. In the presence of PAA, the characteristic changes of metachromatic band with changes of P/D (the ratio between available binding site and the dye concentration) are found and the discussions are made in terms of stacking theory. A kinetic study of the interaction between DOC and PAA was also investigated by the absorption and fluorescence stopped-flow spectroscopy. The observed relaxation effect in PAA-DOC system can be described quantitatively by assuming two relaxation processes occur.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.227-235
• /
• 1996

poly(acrylic acid)(PAA)-poly(vinyl alcohol)(PVA) membranes have been prepared by crosslinking reaction between the carboxylic acid groups of PAA and the hydroxylic groups of PVA. In the measurements of the swelling and preferential sorption of the membranes, sorption behaviors of the membranes in pure water, pure acetic acid and a mixture of them have been investigated, respectively. From the measurements of the preferential sorption in 90wt% acetic acid of aqueous mixture, the sorption of water component was found to be more enhanced at high PAA content in the membrane than that of acetic acid component due to the interaction of water with acetic acid. The sorption behavior and the degree of crosslinking influenced competitively the permeation behavior of permeants. Permeation behavior of perrecants through the membranes was analyzed by using permeation activation energies which had been obtained from the Arrhenius plots of fluxes.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1063-1068
• /
• 2002

Polyimide/silica(PI/silica) hybrid materials having physical or chemical bonds between the PI and silica network were prepared using sol-gel process through hydrolysis and polycondensation of tetraethoxysilane with the polyamic Acid(PAA) or end-capped PAA solution. PAA solution was synthesized by ring opening reaction of pyromellitic dianhydride and oxydianiline monomers in dimethyl acetamide solution. End-capped PAA solution was synthesized by the addition of 3-aminopropyltriethoxysilane in PAA solution. PI/silica hybrid samples were characterized by infrared spectroscopy, differential thermogravimetry, X-ray diffractometry, scanning electron microscopy, and tensile tester. It has been demonstrated that the properties of hybrid samples were affected by the silica content and the bond type between PI and silica.