• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.29-41
• /
• 2023

This study is about a hybrid lightweight cowl crossbeam structure with high rigidity and ability to absorb collision energy to support the cockpit module, which is an automobile interior part, and to absorb energy during a collision. It is a manufacturing process in which composite material bracket parts are inserted and injected into existing steel bars. When considering the mounting condition of a vehicle, the optimization of the fastening condition of the two parts and the mechanical properties of the composite material is acting as an important factor. Therefore, this study is about a composite material having a volume content of Polyamide(PA) and Glass Fiber used as a composite material for a composite material-metal hybrid cowl crossbeam. As a result of analyzing the physical properties of the PA/GF composite material, experimental data were obtained that can further enhance tensile strength and flexural strength by using PA66 rather than PA6 used as a base material for the composite material. And based on this, it contributed to securing the advantage of lightening by using high-stiffness composite material by improving the high disadvantage of the weight of the cowl crossbeam material, which was made only of existing metal materials.

• 농업과학연구
• /
• 제42권4호
• /
• pp.299-304
• /
• 2015

This study was conducted to investigate growth characteristics to develop the technique to select resistant cultivar by wet injury at an early stage through the automatic irrigation maintaining 30, 20, 10 kPa respectively using native variety, Chunpoong, Yunpoong, Gumpoong and Sunun. The aerial growth was decreased at 10 kPa compared to 30 kPa. In addition, the survival rate was decreased by 66.6%, 62.3%, 33.8% at 30, 20, 10 kPa, respectively. The survival rate of Chunpoong and Gumpoong were higher than others at 10 kPa. While root growth characteristics such as root length, root weight, number of lateral root and side root were tended to decrease, root diam was no significant or increased. And the more humid condition is, the more the incidence rate of rusty root and rough skin were tended to increase. The epidermal thickness of Chunpoong and Gumpoong was increased but the figures of native variety, Yunpoong and Sunun were decreased at 10 kPa compared to 30 kPa. But, the tissue stiffness of root was decreased at 10 kPa compared to 30 kPa.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2005년도 추계학술발표회 및 workshop
• /
• pp.150-150
• /
• 2005

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.63-69
• /
• 2000

The main target of this research is investigating the relations between mechanical properties and injection conditions, like injection pressure, packing pressure and packing time for various contents ratio of glass fiber and resin. In general idea, high injection pressure produces high strength of molded parts as a monotonic function. but it was revealed that high pressure does not make high strength directly through various experiments of injection molding. In this experiments, PA66 was selected as resin and Glass Fiber was selected as reinforcing fiber Fiber reinforcement was controlled, as 14%, 25%, 33%, 44% of total volume and packing pressure was divided 55%, 65%, 75%, 85% of reference pressure, i.e. 100% equal to 1400kgf/$\textrm{cm}^2$. Finally, tensile testing was executed for injected test specimen. Optimum results based on authors' experiments have been obtained under conditions of 25% and 33% of glass fiber contents. Tensile strength rather depends on the packing pressure and packing time than injection pressure. Especially almost equal value of tensile strength was obtained for various percentage of packing and injection pressure as 65%, 75% and 85% of reference pressure.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.373-377
• /
• 2009

플라스틱 제품 중 대부분은 사출성형 공정에 의해 이루어지고 있다. 사출성형품에서 휨은 제품의 치수에 영향을 미치며 또한 조립시의 문제점으로 작용한다. 본 연구에서는 사각 Flat한 시편과 여기에 리브가 수지 흐름방향으로 시편, 리브가 수지 흐름방향의 수직으로 있는 시편에 대해서 사출성형 후 휨에 대해서 연구하였다. 비 보강된 비결정성 수지 (PC, ABS) 와 결정성 수지 (PP, PA66)에 대해서 휨을 비교 하였다. 제품형상이 Flat한 시편보다 평판에 리브가 있는 시편에서 휨이 6~9% 더 많이 발생하였다. 그리고 리브가 수지 흐름방향의 수직으로 놓여있는 시편보다 수지 흐름방향으로 놓여있는 시편에서 휨이 25~39% 더 많이 발생하였다. 또한 비결정성 수지보다는 결정성 수지에서 휨이 23~67% 더 많이 발생하였다. 성형조건에 따른 영향은 보압시간이 증가 할수록 휨이 감소하였고 수지온도가 증가 할수록 휨은 증가하였다.

• Parasites, Hosts and Diseases
• /
• 제24권2호
• /
• pp.177-186
• /
• 1986

폐(肺)디스토마증(症)의 면역혈청학적(免疫血淸學的) 진단(診斷)에 사용(使用)하는 성충항원(成蟲抗原)을 몇가지 생화학적(生化學的) 방법(方法)으로 분획(分劃)하여 정제항원(精製抗原)으로서의 가치(價値)를 검토(檢討)하고자 하였으며, 실험적(實驗的)으로 폐(肺)디스토마 피낭유충(被囊幼蟲)을 감염(感染)시킨 고양이에서 감염강도(感染强度), 감염경과(感染經過) 및 치료(治療)에 따른 ELISA 항체가(抗體價)의 변동(變動)을 추적(追跡)하였다. 폐(肺)디스토마 조항원(粗抗原)은 ammonium sulfate precipitation, ion exchange chromatography 및 gel permeation을 거쳐 5개(個)의 분획항원(分劃抗原)으로 나누었으며 폐(肺)디스토마 피낭유충(被囊幼蟲)을 60개(個)(60mc군(群)), 30개(個)(30mc군(群)), 15개(個)(15mc군(群)) 그리고 5개(個)(5mc군(群))씩 각각(各各) 고양이 10마리에 경구투여(經口投與)하고, 5마리씩에는 150일후(日後)에 praziquantel을 100mg/kg로 2회(回) 1일(日) 투여(投與)하였으며 혈청(血淸)은 10일(日) 간격(間隔)으로 채취하였다. 항원(抗原)은 $2{\mu}g/ml$의 농도(濃度)로 사용(使用)하고 실험혈청(實驗血淸)은 100배(倍) 희석(稀釋)하여 ELISA법(法)을 실시(實施)하여 다음의 결과(結果)를 얻었다. 1. Ammonium sulfate precipitation에 의(依)해 분회(分劃)된 항원(抗原)들의 양성혈청(陽性血淸)에 대(對)한 ELISA값은 $51{\sim}55%$ ammonium sulfate 농도(濃度)에서의 침전분획(沈澱分劃)(PA2)이 가장 높았고 다음이 $0{\sim}5%$ 침전분획(沈澱分劃)(PA1), $66{\sim}80%$ 침전분획(沈澱分劃)(PA3)의 순(順)이었으며 $81{\sim}90%$ 침전분획(沈澱分劃)(PA4) 및 침전(沈澱)안된 분획(分劃)(PA5)은 ELISA값이 매우 낮았다. 2. PA1, PA2 및 PA3 분획(分劃)들을 DEAE-cellulose column에 통과(通過)시켜 얻은 분획(分劃)들은 ELISA값에서 유의(有意)한 차이(差異)가 없었다. 3. Sephadex G-200 gel을 통과(通過)한 PA1과 PA2 분획(分劃)들은 분자량(分子量)이 큰 배분(部分)(PA1-I, PA2-I)과 분자량(分子量)이 작은 배분(部分)(PA1-II, PA2-II)에서 높은 ELISA갖을 보였으며 PA3 분획(分劃)은 분자량(分子量)이 큰 배분(部分)(PA3-I)에서만 ELISA값이 높게 나타났다. 4. 전기영동(電氣泳動)의 결과(結果) PA1-I 분획(分劃)은 주(主)로 분자량(分子量) $270K{\sim}196K$ dalton의 단백질(蛋白質)로 되어있고 220K dalton의 단백질(蛋白質)이 가장 많았으며 PA2-I 분획(分劃)은 $255K{\sim}225K$ dalton의 단백질(蛋白質)들로, PA3-I 분획(分劃)은 $235K{\sim}240K$ dalton의 단백질(蛋白質)들로 구성(構成)되어 있었다. 그리고 PA1-II 및 PA2-II 분획(分劃)들은 30K dalton의 단백질(蛋白質)로 이루어져 있었다. 5. 폐(肺)디스토마 감영경과(感染經過)에 따른 ELISA값을 보면 감염후(感染後) $10{\sim}20$일(日) 부터 상승(上昇)하여 $140{\sim}180$일(日)에 최고치(最高値)에 달하며 이후(以後) $0.05{\sim}0.1$정도 하강(下降)한 값으로 계속 유지(維持)되었다. 그리고 폐(肺)디스토마 감염강도(感染强度)에 따른 ELISA값의 차이(差異)는 볼 수 없었다. 6. 고양이에 폐(肺)디스토마를 감염(感染)시킨 150일후(日後)에 praziquantel로 치료(治療)하였을 때 60mc 투여군(投與群)은 치료후(治療後) 150일(日)까지 양성범위(陽性範圍)의 ELISA값을 유지(維持)하였으나 치료전(治療前)에 비(比)하여는 유의(有意)하게 ELISA값이 하강(下降)하였다. 30mc, 15mc 및 5mc 투여군(投與群)의 경우에는 치료후(治療後) $60{\sim}80$일(日)에 ELISA값이 피낭유충(被囊幼蟲) 투여전(投與前)과 비슷한 수준(水準)으로 떨어졌다. 7. 각(各) 항원(抗原)에 따른 ELISA값은 PA1-I 분획항원(分劃抗原)이 가장 높았고 PA2-I 분획항원(分劃抗原)이 다음이었다. PA1-I, PA2-II 및 PA3- I 분획항원(分劃抗原)들은 서로 비슷한 ELISA 값으로 그 다음이었으며 조항원(粗抗原)이 가장 낮은 값을 나타내었다. 특(特)히 PA1-II 분획(分劃)은 감염초기(感染初期)부터 ELISA값이 급격(急激)히 상승(上昇)하여 감염(感染) $20{\sim}30$일후(日後)에는 양성범위(陽性範圍)의 값을 나타내었다. 그리고 Praziquantel로 치료(治療)한 후(後)의 ELISA값은 각(各) 항원(抗原)에 따라 차이(差異)를 볼 수 없었다.

• Journal of Korean Neurosurgical Society
• /
• 제66권2호
• /
• pp.144-154
• /
• 2023

Objective : Stroke caused from large vessel occlusion (LVO) has emerged as the most common stroke subtype worldwide. Intravenous tissue plasminogen activator administration (IV-tPA) and additional intraarterial thrombectomy (IA-Tx) is regarded as standard treatment. In this study, the authors try to find the early recanalization rate of IV-tPA in LVO stroke patients. Methods : Total 300 patients undertook IA-Tx with confirmed anterior circulation LVO, were analyzed retrospectively. Brain computed tomography angiography (CTA) was the initial imaging study and acute stroke magnetic resonance angiography (MRA) followed after finished IV-tPA. Early recanalization rate was evaluated by acute stroke MRA within 2 hours after the IV-tPA. In 167 patients undertook IV-tPA only and 133 non-recanalized patients by IV-tPA, additional IA-Tx tried (IV-tPA + IA-Tx group). And 131 patients, non-recanalized by IV-tPA (IV-tPA group) additional IA-Tx recommend and tried according to the patient condition and compliance. Results : Early recanalization rate of LVO after IV-tPA was 12.0% (36/300). In recanalized patients, favorable outcome (modified Rankin Scale, 0-2) was 69.4% (25/36) while it was 32.1% (42/131, p<0.001) in non-recanalized patients. Among 133 patients, non-recanalized after intravenous recombinant tissue plasminogen activator and undertook additional IA-Tx, the clinical outcome was better than not undertaken additional IA-Tx (favorable outcome was 42.9% vs. 32.1%, p=0.046). Analysis according to the perfusion/diffusion (P/D)-mismatching or not, in patient with IV-tPA with IA-Tx (133 patients), favorable outcome was higher in P/D-mismatching patient (52/104; 50.0%) than P/D-matching patients (5/29; 17.2%; p=0.001). Which treatment tired, P/D-mismatching was favored in clinical outcome (iv-tPA only, p=0.008 and IV-tPA with IA-Tx, p=0.001). Conclusion : The P/D-mismatching influences on the recanalization and clinical outcomes of IV-tPA and IA-Tx. The authors would like to propose that we had better prepare IA-Tx when LVO is diagnosed on initial diagnostic imaging. Furthermore, if the patient shows P/D-mismatching on MRA after IV-tPA, additional IA-Tx improves treatment results and lessen the futile recanalization.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.16-23
• /
• 1999

Deposition of parylene (PA) films has been explored at substrate temperatures below 2$0^{\circ}C$ and pressures below 4 torr. The film thickness was measured using AFM and the film thickness measured was 3,500-12,000$\AA$ and the growth rate was 20-70$\AA$/min. T도 dielectric constant of the deposited PA films was found to be 2.66 and the dielectric strength was in excess of 2$\times$105V/cm. The growth rate became a maximum at a precursor decomposition temperature of $600^{\circ}C$. It was found that the growth rate decreased with increasing substrate temperature, whereas it increased with increasing pressure. At a precursor decomposition temperature of 75$0^{\circ}C$ or at a deposition pressure above 1 Torr the film surface became rough due to particle formation in the gas phase. The condensation of a p-xylylene monomer on the substrate surface turned out to be a rate-limiting step in the growth of the PA films.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.492-497
• /
• 2006

The study on laser-ablation plasmas has been strongly interested in fundamental aspects of laser-solid interaction and consequent plasma generation. In particular, this plasma has been widely used for the deposition of thin solid films and applied to the semiconductors and insulators. In this paper, we developed and discussed the generation of carbon ablation plasmas emitted by laser radiation on a solid target, graphite. The progress of carbon plasmas by laser-ablation was simulated using Monte-Carlo particle model under the pressures of vacuum, 1 Pa, 10 Pa and 66 Pa. At the results, carbon particles with low energy were deposited on the substrate as the pressure becomes higher However, there was no difference of deposition distributions of carbon particles on the substrate regardless of the pressure.

• Archives of Pharmacal Research
• /
• 제19권1호
• /
• pp.66-70
• /
• 1996

Aliphatic esters of protocatechuic acid (PA, 1), vanillic acid (VA, 9) and gallic acid (GA, 18) were prepared and their anti-thrombotic effects were evaluated in the mouse model of thrombosis. The aliphatic groups included methyl, ethyl, n-propyl, i-propyl, n-butyl, i-butyl, n-amyl and cyclohexyl. n-Amyl ester of PA (7), i-propyl and cyclohexyl esters of VA (13 and 17 respectively) and ethyl ester of GA (20) treatment significantly lowered the death rate and increased the recovery from paralysis due to the thrombotic challenge. From the limited analogs available, it was tentatively concluded that the structural conformation, where carboxy oxygen (=O or -O) of the carboxyl group (COOH) at $C_1$ and the oxygen function at $C_3(either\; OH\; or\; OCH_3)$ are closely situated, is favorable for the esters of PA, VA and GA to be more antithrombotic.