• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.325-332
• /
• 1999

A manure management plan is important for all dairy operations. This experiment was conducted to determine the effect of different nitrogen(N) application rates of liquid cattle manure on the forage quality, N recovery, and total forage yields of corn-oats cropping system and soil properties at the National Livestock Research Institute, RDA, Suweon in 1997. Eight treatments consisting of no fertilizer, chemical fertilizer $320kg\;N\;ha^{-1}$ as urea, the continuous applications of 320, 640 and $960kg\;N\;ha^{-1}$ as liquid cattle manure(LCM), the residual effects of 200, 400 and $600kg\;N\;ha^{-1}$ as liquid cattle manure were arranged in a randomized complete block design with three replications. Mean plant height of fall sown oats was 70 and 61cm at the continuous application and the residual effect plots, respectively. Mean dry matter percent of fall sown oats at the residual effect plots was higher by 0.9% than that of oats at the continuous application plots, but there were no differences among all treatments. Mean crude protein(CP), acid detergent fiber(ADF), and neutral detergent fiber (NDF) contents of fall sown oats at the continuous application plots were higher by 1.0, 1.6, and 3.1%, respectively, than those of the residual effect plots. Also, there were significant differences among treatments (P<0.05). Total forage dry matter yields of corn and oats cropping system were ranged from 11,365 to $25,668kg\;ha^{-1}$ among the treatments. The yield was orderly ranked as LCM $960kg\;N\;ha^{-1}$ > LCM $600kg\;N\;ha^{-1}$ > LCM $640kg\;N\;ha^{-1}$ > LCM $400kg\;N\;ha^{-1}$ (P<0.05). Compared with the control, manurial value(MV) was 158 and 139% for the plot of the LCM $960kg\;N\;ha^{-1}$ and that of the LCM $600kg\;N\;ha^{-1}$, respectively. N recovery percent of fall sown oats was the highest at the plot of the LCM $200kg\;N\;ha^{-1}$ by 50%, and then was higher in order of the LCM $400kg\;N\;ha^{-1}$, LCM $600kg\;N\;ha^{-1}$, and LCM $320kg\;N\;ha^{-1}$. Contents of exchangeable cation in the soil of the residual effect plots was higher than that of the continuous application plots. These results suggest that the LCM $600kg\;N\;ha^{-1}$ may be the most effective in total forage dry matter yields, manurial value, N recovery, and utilizing liquid manure N under the corn and oats double cropping system.

• KIPE Magazine
• /
• v.9 no.4
• /
• pp.37-41
• /
• 2004

1996년 출시이래, MiniSKiiP은 가격 효과적이고 신뢰성 높은 CIB모듈(Converter-Inverter-Brake chopper)로 인정을 받아왔다. 수백만 개가 팔림에 따라, CIB급 모듈 중에서 시장에서의 리더로서의 자리를 굳혀 왔다. 현재 MiniSKiiP은 대량 생산이 필요한 소형 인버터 제품에 광범위하게 사용되고 있다.(중략)

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.514.3-515
• /
• 1986

λP$_{L}$ promoter와 Infiuenza virus의 NS1 Structural gene이 있는 pASl EH801 plasmid를 E. coli host N5' 과 AR120에 각각 transformation하여 온도와 nalidixic acid로 각각 induction 하여 보았다 N5151의 경우, O.D.600 1.2에서 42$^{\circ}C$로 induction하였을 때 maximum productivity를 보였으며 AR120의 경우는 O. D. 600 1.2, 37$^{\circ}C$, 40$\mu\textrm{g}$ nalidixic acid/$m\ell$ induction 하였을 때 maximum yield를 보여주었다. 이때 pH, DO, temperature, $O_2$%, $CO_2$%를 A/D converter통해 computer에 연결시켜 data acquision을 한 결과, 접종 후 ON-line induction이 가능함을 알 수 있었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.283-288
• /
• 2004

We have fabricated MIM capacitors for MMIC applications, with capacitances as high as 600pF/$\textrm{mm}^2$ and excellent electrical properties of the insulator layer. Silicon nitride thin film is the desirable material for MMIC capacitor fabrication. Standard MIM capacitance in MMIC is 300pF/$\textrm{mm}^2$ with an insulator layer thickness of more than 2000$\AA$. However, capacitors with thin insulator layers have breakdown voltages as low as 20V. We have deposited insulator layers by PECVD in our MIM structure with an air bridge between the top metal and the contact pad. The PECVD process was optimized for fabricating the desired capacitors to be used in MMIC. Silicon nitride(Si$_{x}$N$_{y}$) thin films of about 1000$\AA$ thick show capacitances of about 600pF/$\textrm{mm}^2$, and breakdown voltages above 70V at 100nA.A.A.

• Natural Product Sciences
• /
• v.7 no.3
• /
• pp.90-93
• /
• 2001

The effects of the dried fruit powder of Opuntia ficus-indica var. saboten (OF-f) were investigated on gastric lesion and ulcer models in rats. It showed significant inhibition in HCl ethanol and HCl aspirin induced gastric lesion at a dose of 600 mg/kg, p.o. OF-f also showed significant inhibition in indomethacin induced gastric lesion at the doses of 200 and 600 mg/kg, p.o. However, it did not affect aspirin and Shay ulcer in rats. It also did not affect the gastric juice secretion, acid output and pH. These data suggest that OF-f possesses pronounced inhibitory action on gastric lesion of rats.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1847-1849
• /
• 2005

Unclamped Inductive Switching (UIS) 능력을 향상시키기 위하여 Floating p- well을 적용한 IGBT의 단락 회로 상태에서 과전압을 감지하는 새로운 보호회로를 제안하고 제작하였다. 실험 결과 제안된 회로는 fault 상황에서 fault 신호를 감지하고 즉시 게이트 전압을 낮추어 컬렉터 전류를 감소시켰다. 또한 Hard Switching Fault (HSF)와 Fault Under Load (FUL) 상황에서의 측정 및 2차원 Mixed-Mode 시뮬레이션을 통해 제안된 회로와 소자의 동작을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.153-154
• /
• 2009

원자력발전소 증기발생기 전열관 보수 기술의 하나로 니켈 합금 전기 도금이 연구되고 있다. 여러 도금 공정변수 중 peak current density를 달리하여 Ni-P-Fe 전기도금층을 제조한 뒤, 열처리 온도 $325^{\circ}C$에서 10, 30일간 열처리를 한 후, 인장강도와 연신율을 측정하고, 그 파단면을 관찰하였다. 50mA/$cm^2$로 제조된 도금층은 100mA/$cm^2$로 제조된 도금층에 비해 우수한 열적안정성을 가짐을 알 수 있었다.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.141-149
• /
• 2011

Samples (two granites, marble, sandstone) were heated in an electric furnace at temperature $400^{\circ}C$ and $600^{\circ}C$ in order to investigate the change of physical properties of rocks depending on the heating temperature. Changes of Color and physical properties such as specify gravity, porosity, absorption, p-wave velocity are visible while mineralogical changes by using polarizing microscope are not pronounced. In addition, porosity and absorption increased while specific gravity and p-wave velocity decreased at a more higher temperature ($600^{\circ}C$). Although the open porosity does not indicate total porosity of the rock. but p-wave velocity can be used to evaluate the degree of damage Therefore, porosity and p-wave velocity should be compared in order to investigate the change of physical properties of rocks depending on the heating temperature.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.707-715
• /
• 2009

This paper deals with cyclic stress and strain responses during isothermal low cycle fatigue (LCF) and thermo-mechanical fatigue (TMF) loadings on Nb and Mo containing 15Cr stainless steel, which is used for exhaust manifolds in automobiles. The test temperatures ($T_{i}$) of the isothermal LCF were 600 and $800^{\circ}C$. The minimum temperature of the TMF test was $100^{\circ}C$ and the maximum temperaures ($T_{p}$) were varied between 500 and $800^{\circ}C$. In both loading conditions, weak cyclic softening is observed at $T_{i}=T_{p}=800^{\circ}C$, but the transition to strong cyclic hardening is completed with the temperature decrease below $T_i=600{\sim}700^{\circ}C$ for LCF and $T_{p}=500{\sim}600^{\circ}C$ for TMF. The stress-strain hysteresis loops in the TMF loading show a significant stress relaxation during compressive (heating) half cycle at $T_{p}>500^{\circ}C$, which develops tensile mean stress during cycling. Due to the stress relaxation, the TMF test sample reveals much lower dislocation density than the isothermally fatigued sample at the same temperature with $T_{p}$. A detailed correlation between fatigue microstructure and cycling deformation behavior is discussed.

• Microbiology and Biotechnology Letters
• /
• v.19 no.3
• /
• pp.259-264
• /
• 1991

Glutamine synthetase (GS) of Kkbsiellu pmumonzae was purified and identified it's properties. It was determined to be composed of 12 identical subunits and it's molecular weight was about 600,000. It's optimum pH and temperature were identified as pH 7.0 and $37^{\circ}C$ respectively, and also there was no considerable variation of activity between pH 5 and 8. When GS was incubated at $57^{\circ}C$ for 10 min, it's activity was decreased to half of maximum activity. It was observed that K. pneumoniae has adenylylation-deadenylylation system which regulates activity of GS according to the quality and quantity of nitrogen source like GS of E. coli Also it's GS was very similar to that of E. coli. in structure deduced from the immunodiffuslon experiment using anti-E. coli GS antibody.