• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.107-113
• /
• 2009

In order to improve air stability, we proposed a new active layer of an organic TFT by synthesizing P3HT/POSS conjugated polymer. P3HT/POSS OTFTs with the various P3HT/POSS volume ratios were fabricated and characterized. With the P3HT/POSS volume ratio of 1:1, we achieved the field-effect mobilities of ${\sim}1.19{\times}10^{-3}\;cm^2/v{\cdot}sec$ in the saturation region and the current on/off ratio of ${\sim}2.51{\times}10^2$. The resulting current on-off ratio was much higher than that of the P3HT-based OTFTs and resulted from the dramatic decrease of the off-current. Since the off-current can be reduced by preventing oxygen in atmosphere from doping the P3HT/POSS active layers, this new active layer shows its ability to avoid oxygen doping in atmosphere. Therefore, the improvement of the air stability can be achieved by employing the P3HT/POSS active layers.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.237-240
• /
• 2012

A conducting polymer, poly 3-hexylthiophene (P3HT) is characterized with the metal-insulator-semiconductor (MIS) measurement method and the high frequency planar circuit method. From the MIS measurement method, the relative dielectric constant of the P3HT film is estimated to be 4.4. For the high frequency planar circuit method, a coplanar waveguide is fabricated on the P3HT film. When applying +20 V to the CPW on P3HT film, the P3HT film is in accumulation mode and becomes lossy. The CPW on P3HT film is 1.5 dB lossier than the CPW on $SiO_2$ film without P3HT film at 50 GHz.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1491-1494
• /
• 2014

High-crystallinity poly(3-hexylthiophene) (P3HT) thin films were prepared by aging the precursor solutions, prepared using a good solvent, chloroform, at low temperatures prior to spin-casting. Lower solution temperatures significantly improved the molecular ordering in the spin-cast P3HT films and, therefore, the electrical properties of field-effect transistors prepared using these films. Solution cooling enhanced the electrical properties by shifting the P3HT configuration equilibrium away from random coils and toward more ordered aggregates. At room temperature, the P3HT molecules were completely solvated in chloroform and adopted a random coil conformation. Upon cooling, however, the chloroform poorly solvated the P3HT molecules, favoring the formation of ordered P3HT aggregates, which then yielded more highly crystalline molecular ordering in the P3HT thin films produced from the solution.

• Composites Research
• /
• 제36권5호
• /
• pp.349-354
• /
• 2023

Poly(3-hexylthiophene) (P3HT)는 유기 용매에서 높은 용해도를 가지고 있으면서 상대적으로 쉽게 구할 수 있는 공액 고분자 중 하나이다. 그러나, 전자소자의 활성 소재로써 전기적 특성은 실제로 응용하기에는 부족하므로 추가 개선이 필요하다. 본 연구에서는, 서로 다른 위치 규칙성 (regio-regularity)을 가지는 두 P3HT 고분자 (즉, regioregular (RR) P3HT 및 regio-random (RRa) P3HT)를 혼합하여 혼합 박막의 전하 전달 특성을 크게 향상시킬 수 있음을 보여준다. 두 P3HT 고분자 간 비율을 변화시킴으로써 혼합 박막의 구조적 및 전기적 특성을 체계적으로 조사하였으며, 원자 힘 현미경(AFM), X선 회절(XRD) 및 UV-vis 흡수분광법을 사용하여 혼합 필름의 구조 및 광전자적 특성을 평가하였다. 혼합 박막의 결정성은 RRa-P3HT 함량이 20 wt%로 증가함에 따라 증가하였으며, 이후 80%까지 증가함에 따라 감소하였다. 전하 이동도의 경향성 또한 이와 같았으며, 20 wt%의 RRa-P3HT를 포함하는 혼합 박막의 전하 이동도는 가장 높은 0.029 cm²/V·s로 측정되었고 함량이 80 wt%까지증가함에따라 0.0007 cm²/V·s 로감소하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.61.2-61.2
• /
• 2015

In the past decades, green energy, such as solar energy, wind power, hydropower, biomass energy, geothermal energy, and so on, has been widely investigated and developed to solve energy shortage. Recently, organic solar cells have attracted much attention, because they have many advantages, including low-cost, flexibility, light weight, and easy fabrication [1-3]. Organic solar cells are as a potential candidate of the next generation solar cells. In this abstract, to improve the power conversion efficiency and the stability, the inverted polymer solar cells with various structures were developed [4-6]. The novel cell structures included the P3HT:PCBM inverted polymer solar cells with AZO nanorods array, with pentacene-doped active layer, and with extra P3HT interfacial layer and PCBM interfacial layer. These three difference structures could respectively improve the performance of the P3HT:PCBM inverted polymer solar cells. For the inverted polymer solar cells with AZO nanorods array as the electronic transportation layer, by using the nanorod structure, the improvement of carrier collection and carrier extraction capabilities could be expected due to an increase in contact area between the nanorod array and the active layer. For the inverted polymer solar cells with pentacene-doped active layer, the hole-electron mobility in the active layer could be balanced by doping pentacene contents. The active layer with the balanced hole-electron mobility could reduce the carrier recombination in the active layers to enhance the photocurrent of the resulting inverted polymer solar cells. For the inverted polymer solar cells with extra P3HT and PCBM interfacial layers, the extra PCBM and P3HT interfacial layers could respectively improve the electron transport and hole transport. The extra PCBM interfacial layer served another function was that led more P3HT moving to the top side of the absorption layer, which reduced the non-continuous pathways of P3HT. It indicated that the recombination centers could be further reduced in the absorption layer. The extra P3HT interfacial layer could let the hole be more easily transported to the MoO3 hole transport layer. The high performance of the novel P3HT:PCBM inverted polymer solar cells with various structures were obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of 218 nW/$\textrm{cm}^2$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.294-302
• /
• 2007

We studied on possibility of the application of photolithography technique to patterning the organic active layer poly(3-hexylthiophene) (P3HT). In the case of selective etching method, we made thin oxide film on P3HT thin film using $O_2$ treatment. We achieved the field-effect mobilities in the saturation regime ${\sim}1.2{\times}10^{-3}\;cm^2/V{\cdot}s$, $I_{on/off}$ ratios ${\sim}10^5$ in the selective etching method, ${\sim}7.4{\times}10^{-4}cm^2/V{\cdot}s$, $I_{on/off}$ ratios ${\sim}5{\times}10^3$ in the lift-off one. These values are higher than ones of the unpatterned P3HT-based OTFTs. On the basis of the above results, we demonstrate the photolithographic patterning for P3HT active layer is successfully carried out without degradation of P3HT.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.313-313
• /
• 2010

The performance of polymer photovoltaic cells based on blends of poly(3-hexylyhiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) is strongly influenced by blend composition and thickness. Polymer photovoltaic cells based on bulk-heterojunction have been fabricated with a structure of ITO/poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)-pentacene/poly (3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM)/Al. We have prepared PEDOT:PSS by dissolving pentacene in N-methylpyrrolidine (NMP) and mixing with PEDOT:PSS. Pentacene was added a maximum concentration of approximately 5.5mg to the PEDOT:PSS solution and sonicated for 10 min. Active layer (P3HT:PCBM) (1:1) was strongly influenced by PEDOT:PSS-pentacene. We have investigated the performance of photovoltaic device with different concentration of P3HT:PCBM (1:1) 2.0wt%, 2.2wt%, 2.4wt% and 2.6wt%, respectively. The photocurrent and power conversion efficiency (PCE) showed a maximum between 2.0wt% and 2.2wt% concentration of P3HT:PCBM. This implied that both morphology and electron transport properties of the layer influenced the performance of the present photovoltaic cells. As the concentration of P3HT:PCBM blends as an active layer was increased, the power conversion efficiency was decreased. P3HT:PCBM layer and PEDOT:PSS-pentacene layer were characterized by work function, UV-visible absorption, atomic force microscopy (AFM), X-ray diffraction (XRD) and scanning electron microscope (SEM).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.278-278
• /
• 2010

3.37 eV의 와이드 밴드갭과 60 mV의 높은 엑시톤 결합에너지를 갖는 반도체인 ZnO는 화학 및 열적 안정성, 압전특성 등 다양한 특성을 갖는 물질로써, 수열합성법을 이용하여 길이 $1.5{\mu}m$, 직경 100nm의 n-type ZnO 나노와이어를 성장시켰으며, P3HT는 유기 태양전지에서 가장 많이 사용되는 고분자 도너로써 열처리를 통하여 결정화 됨에 따라, 엑시톤의 확산속도나 전하의 이동도가 증가하여 더 많은 광전류를 생성하는 장점을 가지고 있다. 본 연구에서는 ZnO 필름이 아닌 n-type ZnO 나노와이어와 Poly(3-hexylthiophene) (P3HT)를 사용 하여 ZnO/P3HT 이종접합 태양전지를 제작하였다. 기판으로 글래스, 전극으로 ITO (Indium Tin Oxide), 나노와이어의 씨앗층으로 ZnO:Al를 스퍼터로 100nm 증착 하였다. Znc nitrate hydrate와 hexamethylenetetramine이 혼합된 수용액에서 기판을 담그고 n-type ZnO 나노와이어 성장 시키고, P3HT의 스핀 코팅조건과 열처리 온도를 변화시켜 P3HT의 두께와 결정화도가 ZnO/P3HT 이종접합 태양전지에 미치는 영향을 비교 분석 하였다.