• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• SUVANNABHUMI
• /
• v.3 no.1
• /
• pp.47-66
• /
• 2011

Malay society is rooted on the Islamic concept. That Islam influenced every corner of that Malay society which had ever been an edge of the civilizations of the Indus and Ganges. Once the letters of that Hindu religion namely Sanscrit was adopted to this Malay society for the purpose of getting the Malay language, that is, Bahasa Melayu down to the practical literation but in vain. The Sanscrit was too complicated for Malay society to imitate and put it into practice in everyday life because it was totally different type of letters which has many of the similar allographs for a sound. In the end Malay society gave it up and just used the Malay language without using any letters for herself. After a few centuries Islam entered this Malay society with taking Arabic letters. It was not merely influencing Malay cultures, but to the religious life according to wide spread of that Islam. Finally Arabic letters was to the very means that Malay language was written by. It means that Arabic letters had been used for Arabic language in former times, but it became a similar form of letters for a new language which was named as Malay language. This Arabic letters for Arabic language has no problems whereas Arabic letters for Malay language has some of it. Naturally speaking, arabic letters was not designed for any other language but just for Arabic language itself. On account of this, there occurred a few problems in writing Malay consonants, just like p, ng, g, c, ny and v. These 6 letters could never be written down in Arabic letters. Those 6 ones were never known before in trying to pronounce by Arab people. Therefore, Malay society had only to modify a few new forms of letters for these 6 letters which had frequently been found in their own Malay sounds. As a result, pa was derived from fa, nga was derived from ain, ga was derived from kaf, ca was derived from jim, nya was derived from tha or ba, and va was derived from wau itself. Where must these 6 newly modified letters be put on this Arabic keyboard? This is the very core of this working paper. As a matter of course, these 6 letters were put on the place where 6 Arabic signs which were scarecely written in Malay language. Those 6 are found when they are used only in the 'shift-key-using-letters.' These newly designed 6 letters were put instead of the original places of fatha, kasra, damma, sukun, tanween and so on. The main differences between the 2 set of 6 letters are this: 6 in Arabic orginal keyboard are only signs for Arabic letters, on the other hand 6 Malay's are real letters. In others words, 6 newly modified Malay letters were substituted for unused 6 Arabic signs in Malay keyboard. This type of newly designed Malay Jawi Script keyboard is still used in Malaysia, Brunei and some other Malay countries. But this sort of keyboard also needs to go forward to find out another way of keyboard system which is in accordance with the alphabetically ordered keyboard system. It means that alif is going to be typed for A key, and zai shall be typed when Z key is pressed. This keyboard system is called 'Malay Jawi-English Rumi matching keyboard system', even though this system should probably be inconvenient for Malay Jawi experts who are good at Arabic 'alif-ba-ta'order.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.35-47
• /
• 2018

A edible mushroom, Clitocybe maxima (Lentinus giganteusis) commercially cultivated in China and Taiwan. However, the researches of cultivation and cultural characteristics were not reported in Korea. In this study, we conducted on cultural characteristics and artificial cultivation of C. maxima. Six isolates were collected from China(3 isolates, commercial strain), Taiwan(1 isolate, commercial strain) and Korea(2 isolates, wild type). C. maxima and L. giganteus collected in China and Taiwan, respectively, are the same in China and are estimated to be of the same species as cultured characteristics. The mycelial growth of the collected strains was not significantly different in agar medium but it showed the best growth in YPMG in liquid culture. Optimum temperature for mycelial growth and induction of fruit body were 25℃ and 30℃, respectively. In order to artificial cultivation of C. maxima, cultural characteristics and artificial cultivation were carried out using agricultural by-products and forestry by-products materials. Mycelial growth was suitable in rice straw, cottonwood sawdust, corncob and rice seed medium, and it was selected as a cultivation medium. The suitable medium for artificial cultivation of C. maxima was selected to mixed medium 2(compounding ratio(v/v): 55% of hardwood sawdust, 5% of cottonseed pellets, 10% of cottonseed, 15% of beet pulp, 15% of swollen rice husks). It took about 30 days to be able to harvest, it was faster than oyster mushrooms. The cultivation period was about 30days. A isolate, CMA-002 was not initiation to fruit body primordiuma on the used cultivation substrate. Other 5 isolates were initiate and development to fruit body on the substrate used in this study. The strain CMA-003 was initiated to be fruiting body by 8~10 days after induction of fruiting body in all of the substrates. Isolate CMA-003 was generate to a bundle fruit body. Other isolates, however, were form fruit body individually. The CMA-003 strain was likely highly recommendable strains for farming. The optimum conditions for the induction and growth of C. maxima fruit body were 25~30℃, 8 hr illumination per day with white fluorescent lamp, 90~95% relative humidity, and 1,500 ppm of CO₂ concentration in a cultivation room.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.422-430
• /
• 2023

The nutrient-rich and climate-resilient finger millet (Eleusine coracana (L.) Gaertn.) is a relatively new crop on the agricultural landscape. The present study explores the agronomic characteristics and antioxidant activities of grains and cookies produced from 'Finger1ho,' which was the first finger millet variety developed in South Korea. With heightened calcium content (314 mg/100 g) and polyphenol levels, 'Finger1ho' exhibited superior radical scavenging activities compared to other millets. The investigation assessed the impact of whole finger millet flour at varying concentrations (0, 10, 30, 50, and 100%) on cookie properties. Increasing the substitution of finger millet flour in the cookie formulation resulted in a notable rise in calcium content, ranging from 1.8 times at 10% to an impressive 10.8 times at 100%, surpassing the levels found in conventional wheat cookies. Conversely, the sodium (Na) levels in finger millet cookies demonstrated minimal variations, presenting a potentially favorable aspect in addressing the high Na intake prevalent in the South Korean diet. Notably, the antioxidant activity, assessed through ABTS and DPPH radical scavenging assays, exhibited a significant elevation compared to the control. This increase in antioxidant activity was directly proportional to the quantity of finger millet incorporated (p<0.001), indicating the potential health benefits associated with higher levels of finger millet in the cookie formulation. This study highlights finger millet's potential as a beneficial ingredient, enhancing both consumer acceptability and the functional attributes of cookies. Notably, cookies with 10% to 50% added finger millet exhibited significantly superior quality characteristics compared to controls, suggesting promising avenues for health-functional cookie development.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.166-179
• /
• 2000

Background: The main reason for the failure of anti-cancer chemotherapy is the build up of resistance by cancer cells to apoptosis. The activation of NF-${\kappa}B$ in many cancer cell lines is reported to be underlying mechanism behind the build up of resistance of cancer cells to apoptosis. However, this relationship varied depending on the cells used in the experiments. In this study, the role of NF-${\kappa}B$ activation in the TNF-$\alpha$-induced apoptosis in lung cancer cell line was evaluated. Methods: NCI-H157 cells were used in all experiments. Cells were exposed to a high dose of TNF-$\alpha$(20 ng/ml) for 24 or 48 hours with or without blocking NF-${\kappa}B$ activation. TNF-$\alpha$-induced activation of NF-${\kappa}B$ was inhibited either by overexpression of $I{\kappa}B{\alpha}$-super repressor($I{\kappa}B{\alpha}$-SR) or by pre-treatment with proteasome inhibitor. Cell viability and apoptosis were evaluated with MTT assay and Western blot analysis for PARP fragment, respectively. Results: Cell viability of NCI-H157 cells was not affected by TNF-$\alpha$ treatment alone; however, combined treatment with TNF-$\alpha$ and cycloheximide reduced cell viability significantly, indicating that resistance to TNF-$\alpha$ is mediated by the new proteins synthesized after TNF-$\alpha$ stimulation. To evaluate the role of NF-${\kappa}B$ in the transcription of anti-apoptotic proteins. delete NF-${\kappa}B$ activation was inhibited before TNF-$\alpha$ stimulation. as described above. $AD5I{\kappa}B{\alpha}$-SR-transduction inhibited TNF-$\alpha$-induced nuclear translocation of p65. TNF-$\alpha$-induced cell death and apoptosis increased after inhibition of TNF-$\alpha$-induced activation of NF-${\kappa}$ by methods. Conclusion: These results suggest that TNF-$\alpha$-induced activation of NF-${\kappa}B$ may be closely related to the acquisition of the resistance to TNF-$\alpha$-induced apoptosis in lung cancer cells. Therefore. blocking of NF-${\kappa}B$ pathway can be a useful therapeutic modality in the treatment of lung cancer.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.234-240
• /
• 2007

Purpose: In this study we propose a block-iterative method for reconstructing Compton scattered data. This study shows that the well-known expectation maximization (EM) approach along with its accelerated version based on the ordered subsets principle can be applied to the problem of image reconstruction for Compton camera. This study also compares several methods of constructing subsets for optimal performance of our algorithms. Materials and Methods: Three reconstruction algorithms were implemented; simple backprojection (SBP), EM, and ordered subset EM (OSEM). For OSEM, the projection data were grouped into subsets in a predefined order. Three different schemes for choosing nonoverlapping subsets were considered; scatter angle-based subsets, detector position-based subsets, and both scatter angle- and detector position-based subsets. EM and OSEM with 16 subsets were performed with 64 and 4 iterations, respectively. The performance of each algorithm was evaluated in terms of computation time and normalized mean-squared error. Results: Both EM and OSEM clearly outperformed SBP in all aspects of accuracy. The OSEM with 16 subsets and 4 iterations, which is equivalent to the standard EM with 64 iterations, was approximately 14 times faster in computation time than the standard EM. In OSEM, all of the three schemes for choosing subsets yielded similar results in computation time as well as normalized mean-squared error. Conclusion: Our results show that the OSEM algorithm, which have proven useful in emission tomography, can also be applied to the problem of image reconstruction for Compton camera. With properly chosen subset construction methods and moderate numbers of subsets, our OSEM algorithm significantly improves the computational efficiency while keeping the original quality of the standard EM reconstruction. The OSEM algorithm with scatter angle- and detector position-based subsets is most available.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.46-55
• /
• 1989

Stomatal variation was observed at the Yeongnam Crop Experiment Station in 1988 using 42 rice cultivars and 30 weed species. The shape, density or size of stomata was varied depending on the species. Two general trends, however, were found that more number of stomata was found at lower leaf epidermis than upper leaf epidermis and stomata number was negatively correlated with stomata size. Aneilema japonica and Portulaca oleracea had the least number of stomata having 17-20 stomata per $m^2$ for upper leaf epidermis and 17-54 stomata for lower leaf epidermis while Polygonum conspicuum had the greatest number of stomata (449 for upper leaf epidermis and 511 for lower leaf epidermis). Soybean, Aeschynomene indica, Ludwigia prostrata and Lactuca indica had the smallest in stomata size while the biggest stomata was found at P. oleracea and A. Japonica that had the least number of stomata. Cyperus species such as C. difformis, C. iria and C. serotinus had no stomata at upper leaf epidermis. The stomata were distributed only at lower leaf epidermis for these species. Potamogeton distinctus, on the other hand, had stomata almost at upper leaf epidermis and thus, hardly found the stomata at lower leaf epidermis. Among rice cultivars, Tongil-type had the greatest number of stomata followed by Indica-type and Japonica-type, in order. Cultivars released after 1960 had more stomata than cultivars released before 1960 for Japonica-type cultivars while stomata size had reversed trend. Jinheung had the least number of stomata (${\fallingdotseq}$ 150 per $mm^2$) while Yushin had the greatest number of stomata (350 for upper and 449 for lower leaf epidermis, respectively) among rice cultivars. Other cultivars having more than 350 stomata per $mm^2$ were Samgangbyeo, Milyang 23, Woonbongbyeo, etc.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.1
• /
• pp.31-42
• /
• 2005

Background : Peroxiredoxins (Prxs) are a relatively newly recognized, novel family of peroxidases that reduce $H_2O_2$ and alkylhydroperoxide into water and alcohol, respectively. There are 6 known isoforms of Prxs present in human cells. Normally, Prxs exist in a head-to-tail homodimeric state in a reduced form. However, in the presence of excess $H_2O_2$, it can be oxidized on its catalytically active cysteine site into inactive oxidized forms. This study surveyed the types of the Prx isoforms present in the pulmonary epithelial, macrophage, endothelial, and other cell lines and observed their response to oxidative stress. Methods : This study examined the effect of exogenous, excess $H_2O_2$ on the Prxs of established cell lines originating from the pulmonary epithelium, macrophages, and other cell lines, which are known to be exposed to high oxygen partial pressures or are believed to be subject to frequent oxidative stress, using non-reducing SDS polyacrylamide electrophoresis (PAGE) and 2 dimensional electrophoresis. Result : The addition of excess $H_2O_2$ to the culture media of the various cell-lines caused the immediate inactivation of Prxs, as evidenced by their inability to form dimers by a disulfide cross linkage. This was detected as a subsequent shift to its monomeric forms on the non-reducing SDS PAGE. These findings were further confirmed by 2 dimensional electrophoresis and immunoblot analysis by a shift toward a more acidic isoelectric point (pI). However, the subsequent reappearance of the dimeric Prxs with a comparable, corresponding decrease in the monomeric bands was noted on the non-reducing SDS PAGE as early as 30 minutes after the $H_2O_2$ treatment suggesting regeneration after oxidation. The regenerated dimers can again be converted to the inactivated form by a repeated $H_2O_2$ treatment, indicating that the protein is still catalytically active. The recovery of Prxs to the original dimeric state was not inhibited by a pre-treatment with cycloheximide, nor by a pretreatment with inhibitors of protein synthesis, which suggests that the reappearance of dimers occurs via a regeneration process rather than via the de novo synthesis of the active protein. Conclusion : The cells, in general, appeared to be equipped with an established system for regenerating inactivated Prxs, and this system may function as a molecular "on-off switch" in various oxidative signal transduction processes. The same mechanisms might applicable other proteins associated with signal transduction where the active catalytic site cysteines exist.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.

• Food preservation and processing industry
• /
• v.8 no.2
• /
• pp.6-12
• /
• 2009

면역반응은 외부 감염원으로부터 신체를 보호하고 외부감염원을 제거하고자 하는 주요항상성 유지기전의 하나이다. 이들 반응은 골수에서 생성되고 비장, 흉선 및 임파절 등에서 성숙되는 면역세포들에 의해 매개된다. 보통 태어나면서부터 얻어진 선천성 면역반응을 매개하는 대식세포, 수지상 세포 등과, 오랜기간 동안 감염된 다양한 면역원에 대한 경험을 토대로 얻어진 획득성 면역을 담당하는 T 임파구 등이 대표적인 면역세포로 알려져 있다. 다양한 면역질환이 최근 주요 사망률의 원인이 되고 있다. 최근, 암, 당뇨 및 뇌혈관질환 등이 생체에서 발생되는 급 만성염증에 의해 발생된다고 보고됨에 따라 면역세포 매개성 염증질환에 대한 치료제 개발을 서두르고 있다. 또한 암환자의 급격한 증가는 암발생의 주요 방어기전인 면역력 증강에 대한 요구들을 가중시키고 있다. 예로부터 사용되어 오던 고려인삼과 홍삼은 기를 보호하고 원기를 회복하는 명약으로 알려진 대표적인 우리나라 천연생약이다. 특별히, 홍삼은 단백질과 핵산의 합성을 촉진시키고, 조혈작용, 간기능 회복, 혈당강하, 운동수행 능력증대, 기억력 개선, 항피로작용 및 면역력 증대에 매우 효과가 좋은 것으로 보고되고 있다. 홍삼에 관한 많은 연구에 비해, 현재까지 홍삼이 면역력 증강에 미치는 효과에 대한 분자적 수준에서의 연구는 매우 미미한 것으로 확인되어져 있다. 홍삼의 투여는 NK 세포나 대식세포의 활성이 증가하고 항암제의 암세포 사멸을 증가시키는 것으로 확인되어졌다. 현재까지 알려진 주요 면역증강 성분은 산성다당류로 보고되었다. 또 한편으로 일부 진세노사이드류에서 항염증 효능이 확인되어졌으며, 이를 통해 피부염증 반응과 관절염에 대한 치료 효과가 있는 것으로 추측되고 있다 [본 연구는 KT&G 연구출연금 (2009-2010) 지원을 받아 이루어졌기에 이에 감사드린다]. 면역반응은 외부 감염물질의 침입으로 유도된 질병환경을 제거하고 수복하는 중요한 생체적 방어작용의 하나이다. 이들 과정은 체내로 유입된 미생물이나 미세화학물질들과 같은 독성물질을 소거하거나 파괴하는 것을 주요 역할로 한다. 외부로 부터 인체에 들어온 이물질에 대한 방어기전은 현재 두 가지 종류의 면역반응으로 구분해서 설명한다. 즉, 선천성 면역 반응 (innate immunity)과 후천성 면역 반응 (adaptive immunity)이 그것이다. 선천성 면역반응은 1) 피부나 점막의 표면과 같은 해부학적인 보호벽 구조와 2) 체온과 낮은 pH 및 chemical mediator (리소자임, collectin류) 등과 같은 생리적 방어구조, 3) phagocyte류 (대식세포, 수지상세포 및 호중구 등)에 의한 phagocytic/endocytic 방어, 그리고 4) 마지막으로 염증반응을 통한 감염에 저항하는 면역반응 등으로 구분된다. 후천성 면역반응은 획득성면역이라고도 불리고 특이성, 다양성, 기억 및 자기/비자기의 인식이라는 네 가지의 특징을 가지고 있으며, 외부 유입물질을 제거하는 반응에 따라 체액성 면역 반응 (humoral immune response)과 세포성 면역반응 (cell-mediated immune response)으로 구분된다. 체액성 면역은 침입한 항원의 구조 특이적으로 생성된 B cell 유래 항체와의 반응과 간이나 대식세포 등에서 합성되어 분비된 혈청내 보체 등에 의해 매개되는 반응으로 구성되어 있다. 세포성 면역반응은 T helper cell (CD4+), cytotoxic T cell (CD8+), B cell 및antigen presenting cell 중개를 통한 세포간 상호 작용에 의해 발생되는 면역반응이다. 선천성 면역반응의 하나인 염증은 우리 몸에서 가장 빈번히 발생되고 있는 방어작용의 하나이다. 예를 들면 감기에 걸렸을 경우, 환자의 편도선내 대식세포나 수지상세포류는 감염된 바이러스 단독 혹은 동시에 감염된 박테리아를 상대로 다양한 염증성 반응을 유도하게 된다. 또한, 상처가 생겼을 경우에도 감염원을 통해 유입된 병원성 세균과 주위조직내 선천성 면역담당 세포들 간의 면역학적 전투가 발생되게 된다. 이들 과정을 통해, 주위 세포나 조직이 손상되면, 즉각적으로 이들 면역세포들 (주로 phagocytes류)은 신속하게 손상을 극소화하고 더 나가서 손상된 부위를 원상으로 회복시키려는 일련의 염증반응을 유도하게 된다. 이들 반응은 우리가 흔히 알고 있는 발적 (redness), 부종 (swelling), 발열 (heat), 통증 (pain) 등의 증상으로 나타나게 된다. 즉, 손상된 부위 주변에 존재하는 모세혈관에 흐르는 혈류의 양이 증가하면서 혈관의 직경이 늘어나게 되고, 이로 인한 조직의 홍반과, 부어 오른 혈관에 의해 발열과 부종이 초래되는 것이다. 확장된 모세혈관의 투과성 증가는 체액과 세포들이 혈관에서 조직으로 이동하게 하는 원동력이 되고, 이를 통해 축적된 삼출물들은 단백질의 농도를 높여, 최종적으로 혈관에 존재하는 체액들이 조직으로 더 많이 이동되도록 유도하여 부종을 형성시킨다. 마지막으로 혈관 내 존재하는 면역세포들은 혈판 내벽에 점착되고 (margination), 혈관벽의 간극을 넓히는 역할을 하는 히스타민 (histamine)이나 일산화질소(nitric oxide : NO), 프로스타그린딘 (prostagladins : PGE2) 및 류코트리엔 (leukotriens) 등과 같은 chemical mediator의 도움으로 인해 혈관벽 사이로 삼출하게 되어 (extravasation), 손상된 부위로 이동하여 직접적인 외부 침입 물질의 파괴나 다른 면역세포들을 모으기 위한 cytokine (tumor necrosis factor [TNF]-$\alpha$, interleukin [IL]-1, IL-6 등) 혹은 chemokine (MIP-l, IL-8, MCP-l등)의 분비 등을 수행함으로써 염증반응을 매개하게 된다. 염증과정시 발생되는 여러 mediator 중 PGE2나 NO 및 TNF-$\alpha$ 등은 실험적 평가가 용이하여 이들 mediator 자체나 생성관련효소 (cyclooxygenase [COX] 및 nitric oxide synthase [NOS] 등)들은 현재항염증 치료제의 개발 연구시 주요 표적으로 연구되고 있다. 염증 반응은 지속기간에 따라 크게 급성염증과 만성염증으로 나뉘며, 삼출물의 종류에 따라서는 장액성, 섬유소성, 화농성 및 출혈성 염증 등으로 구분된다. 급성 염증 (acute inflammation)반응은 수일 내지 수주간 지속되는 일반적인 염증반응이라고 볼 수 있다. 국소반응은 기본징후인 발열과 발적, 부종, 통증 및 기능 상실이 특징적이며, 현미경적 소견으로는 혈관성 변화와 삼출물 형성이 주 작용이므로 일명 삼출성 염증이라고 한다. 만성 염증 (chronic inflammation)은, 급성 염증으로부터 이행되거나 만성으로 시작된다. 염증지속 기간은 보통 4주 이상 장기화 된다. 보통 염증의 경우에는 염증 생성 cytokine인 Th1 cytokine (IL-2, interferone [IFN]-$\gamma$ 및 TNF-$\alpha$ 등)의 생성 후, 거의 즉각적으로 항 염증성 cytokine인 Th2 cytokine(IL-4, IL-6, IL-10 및 transforming growth factor [TGF]-$\beta$ 등)이 생성되어 정상반응으로 회복된다. 그러나, 어떤 원인에서든 면역세포에 의한 염증원 제거 반응이 문제가 되면, 만성염증으로 진행된다. 이 반응에 주로 작용을 하는 염증세포로는 단핵구와 대식세포, 림프구, 형질세포 등이 있다. 암은 전세계적으로 사망률 1위의 원인이 되는 면역질환의 하나이다. 산화적 스트레스나 자외선 조사 혹은 암유발 물질들에 의해 염색체내 protooncogene, tumor-suppressor gene 혹은 DNA repairing gene의 일부 DNA의 돌연변이 혹은 결손 등이 발행되면 정상세포는 암화과정을 시작하게 된다. 양성세포 수준에서 약 5에서 10여년 후 악성수준의 암세포가 생성되게 되면 이들 세포는 새로운 환경을 찾아 전이하게 되는데 이를 통해 암환자들은 다양한 장기에 동인 오리진의 암세포들이 생성한 종양들을 가지게 된다. 이들 종양세포는 정상 장기의 기능을 손상시켜며 결국 생명을 잃게 만든다. 이들 염색체 수준에서의 돌연변이 유래 암세포는 거의 대부분이 체내 면역시스템에 의해 사멸되는 것으로 알려져 있다. 그러나 계속되는 스트레스나 암유발 물질의 노출은 체내 면역체계를 파괴하면서 최후의 방어선을 무너뜨리면서 암발생에 무방비 상태를 만들게 된다. 이런 이유로 체내 면역시스템의 정상적 가동 및 증강을 유도하게 하는 전략이 암예방시 매우 중요한 표적으로 인식되면서 다양한 형태의 면역증강 물질 개발을 시도하고 있다. 인삼은 두릅나무과의 여러해살이 풀로써, 오랜동안 한방 및 민간에서 원기를 회복시키고, 각종 질병을 치료할 수단으로 사용되고 있는 대표적인 전통생약이다. 예로부터 불로(不老), 장생(長生), 익기(益氣), 경신(經身)의 명약으로 구전되어졌는데, 이는 약 2천년 전 중국의 신농본초경(神農本草經)에서 "인삼은 오장(五腸)을 보하고, 정신을 안정시키고, 혼백을 고정하며 경계를 멈추게 하고, 외부로부터 침입하는 병사를 제거하여주며, 눈을 밝게 하고 마음을 열어 더욱 지혜롭게 하고 오랫동안 복용하면 몸이 가벼워지고 장수한다" 라고 기술되어있는 데에서 유래한 것이다. 다양한 연구를 통해 우리나라에서 생산되는 고려인삼 (Panax ginseng)이 효능 면에서 가장 탁월한 것으로 알려져 있으며 특별이 고려인삼으로부터 제조된 고려홍삼은 전세계적으로도 그 효능이 우수한 것으로 보고되어 있다. 대부분의 홍삼 약효는 dammarane계열의 triterpenoid인 ginsenosides라고 불리는 인삼 saponin에 의해 기인된 것으로 알려져 있다. 이들 화합물군의 기본 골격에 따라, protopanaxadiol (PD)계 (22종) 및 protopanaxatriol (PT)계 (10종)으로 구분되고 있다 (표 1). 실험적 접근을 통해 인삼의 약리작용 이해를 위한 다양한 노력들이 경주되고 있으나, 여전히 많은 부분에서 충분히 이해되고 있지 않다. 그러나, 현재까지 연구된 인삼의 약리작용 관련 연구들은 심혈관, 당뇨, 항암 및 항스트레스 등과 같은 분야에서 인삼효능이 우수한 것으로 보고하고 있다. 그러나 면역조절 및 염증현상과 관련된 최근 연구결과들은 많지 않으나, 향후 다양하게 연구될 효능부분으로 인식되고 있다.