• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.109-116
• /
• 2008

In this study, the breads with medicinal herbs (MH) composites showing immunostimulating activity were prepared and their characteristics were examined. Fourteen kinds of medicinal herbs were extracted with hot water and divided into 3 groups (MH-1, MH-2, MH-3) based on their contents. All groups showed immunostimulating activity in terms of macrophage phagocytosis, nitrite production, cytostatic activity and cytokine production. In the preparation of breads containing MH extracts of various contents (0, 30, 50, 70, and 100%), there was no significant difference among dough pHs of all groups after first fermentation, but loaf volume was significantly (p<0.05) increased in 70% added group while decreased in 30%, 50%, and 100% added groups compared to the control. The "a" and "b" values of bread crumb increased with the content of MH extracts while "L" value decreased, but these values of bread crust were similar to the control group. Most improvements in hardness, adhesiveness, gumminess and chewiness of bread were noticed by the addition of 70% MH extracts, but those of springiness, cohesiveness and resilience were mostly by the 50% addition ones. Through the sensory evaluation, it was revealed that mouth feeling, taste and overall preference decreased at breads containing 70% and 100% extracts, although appearance and crumb texture were not significantly (p<0.05) different among all groups.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.263-268
• /
• 2006

Recently, self-etching adhesive system has been introduced to simplify the clinical bonding proce- dures. It is less acidic compared to the phosphoric acid, thus there is doubt whether this system has enough bond strength to enamel. The purpose of this study was to investigate the influence of additional etching on the adhesion of resin composite to enamel. Ninety extracted bovine permanent anterior teeth were used. The labial surfaces of the crown were ground with 600-grit abrasive paper under wet condition. The teeth were randomly divided into six groups of 15 teeth each. Clearfil SE $Bond^{\circledR},\;Adper^{TM}$ Prompt L-Pop and Tyrian $SPE^{TM}$ were used as self-etching primers. Each self-etching primers were applied in both enamel specimens with and without additional etching. For additional etching groups, enamel surface was pretreated with 32% phosphoric acid (UNI-ETCH, Bisco, Inc., Schaumburg, IL. USA). Hybrid resin composite Clearfil AP-X, (Kuraray Co., Ltd., Osaka, Japan) was packed into the mold and light-cured for 40 seconds. Twenty-four hours after storage, the specimens were tested in shear bond strength. The data for each group were subjected to independent t - test at p < 0.01 to make comparisons among the groups. In Clearfil SE $Bond^{\circledR}$, shear bond strength of additional etching group was higher than no additional etching group (p < 0.01). In $Adper^{TM}$ Prompt L-Pop and Tyrian SPE, there were no significant difference between additional etching and non-etching groups (p > 0.01). In conclusion, self-etching adhesive system with weak acid seems to have higher bond strength to enamel with additional etching, while self-etching adhesive system with strong acid seems not.

• Asia Marketing Journal
• /
• v.14 no.1
• /
• pp.131-157
• /
• 2012

Despite the voluminous research on switching barriers, the notion that they can generate negative responses has not been investigated. Further, a critical question is what determines the strength of such negative responses. To address this question, the classic theory of psychological reactance is briefly reviewed, and the idea of switching barrier is advanced. This study attempts to suggest a model on the negative effects of switching- frustrated situation, based on the studies on psychological reactance. According to psychological reactance theory(Brehm 1966), whenever a freedom is threatened or removed, individuals are motivated, at least temporarily, to restore their freedom. For example, if individuals think they are free to engage in behaviors .v, y, or z, then threatening their freedom to engage in x would cause psychological reactance. This reactance could be reduced by an increase in the perceived attractiveness of engaging in, the threatened behavior(Kivetz 2005). This investigation seeks to extend existing switching barrier research in three important ways. First, while the past research has emphasized only positive role of switching barrier, this study address negative role of it by applying psychological reactance theory. Second, to find negative results of switching barrier, I suggest negative psychological response including regret to the past choice, resentment to the present provider, and strong desire to the alternative provider. Third, I suggest the perceived severity of the switching barriers, the attractiveness of the alternative as switching-frustrated situation which can lead to negative results. And, in addition to these relationships, I added moderated effects of perceived justice for better explanation. So this study includes the following hypotheses. H1-1 ~ H1-3: The attractiveness of the alternative has a positive effect regret to the past choice (h1-1), resentment to the present provider (h1-2), and strong desire to the alternative provider (h1-3). H2-1 ~ H2-3 : The perceived severity of the switching barrier has a positive effect regret to the past choice (h2-1), resentment to the present provider (h2-2), and strong desire to the alternative provider (h2-3). H3-1 ~ H3-3 : The positive relationships between the attractiveness of the alternative and consumer' negative responses will be stronger at low level of perceived justice than at high level of perceived justice. H4-1 ~ H4-3 : The positive relationships between the perceived severity of the switching barrier and consumer' negative responses will be stronger at low level of perceived justice than at high level of perceived justice. Survey research is employed to test hypotheses involving perceived severity of the switching barrier(Hess 2008), attractiveness of the alternative(Anderson and Narus 1990; Ohanian 1990),regret(Glovich and Medvec 1995), resentment, strong desire(Alcohol Urge Questionaire: Bohn et al. 1995), perceived justice(Bies and Moag 1986; Clemmer 1993; Lind and Tyler 1998). Previous researches, such as reactance theory, emotion and service failure, have been referenced to measure constructs. All items were measured on a 7-point Likert scale ranging from "strongly disagree" to "strongly agree". We collected data involving various service field, and used 249 respondents to analyze these data using the moderated regression. The results of our analysis suggest, as expected, that the perceived severity of the switching barrier had positive effects on regret to the past choice(b = .197, p< .01), resentment to the present provider(b = .214, p< .01), and strong desire to the alternative provider(b = .254, p< .001). And the attractiveness of the alternative had positive effects on regret to the past choice(b = .353, p<.001), resentment to the present provider(b = .174, p< .01), and strong desire to the alternative provider(b = .265, p< .001). However, our findings indicate perceived justice partly moderates relationship between switching-frustrated situation and psychological negative response. The study has brought to light a number of insights between switching barriers and consumer' negative responses that have been subject to little prior research. In particular, this study adds to the existing understanding of the psychological responses to switching barriers in switching- frustrated situation. This research therefore has significance to marketers for strategic marketing programs, particularly in terms of customer retention and switching barrier strategies. Since consumers could exhibit negative responses to switching barrier, companies would be able to lose their customer when they thoughtlessly use switching barrier for remaining customer. Although the study has these contributions, there are several limitations including unsupported hypotheses and research method. So, we need to make up for these limitations in the future researches.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.2
• /
• pp.329-337
• /
• 1997

Background : Since endotracheal tube is the most important factor involved in the imposed work of breathing during mechanical ventilation, extubation of endotracheal tube is supposed to reduce respiratory work of patient. However, some patients show labored breathing after extubation despite acceptable blood gases. We investigated the changes of work of breathing before and after extubation and the factors involved in the change of WOB after extubation. Methods : The subjects were 34 patients(M : F = 20 : 14, mean age = $61{\pm}17yre$) who recovered from respiratory failure after ventilatory support and were considered to be ready for extubation. The patients with clinical or radiologic evidences of upper airway obstruction before endotracheal intubation for mechanical ventilation were excluded. Vital sign, physical examination, chest X-ray, work of breathing and other respiratory mechanic indices were measured prior to, immediately, 6, 24 and 48 hours after extubation serially. Definition of weaning failure after extubation was resumption of ventilatory support or reintubation of endotracheal tube within 48 hour after extubation because of respiratory failure. The patients were classified into group 1(decreased work of breathing), group 2(unchanged work of breathing) and group 3(increased work of breathing) depending on the statistical difference in the change of work of breathing before and after extubation. Results : Work of breathing decreased in 33%(11/34, group 1), unchanged in 41%(14/34, group 2) and increased in 26%(9/34, group 3) of patients after extubation compared with before extubation. Weaning failure occurred 9%(1/11) of group, 1, 28.6%(4/14) of group 2 and 44%(4/9) of group 3 after extubation(p = 0.07). The change of work of breathing after extubation was positively correlated with change of mean airway resistance(mRaw). (r = 0.794, p > 0.01). In three cases of group 3 whose respiratory indices could be measured until 48 hr after extubation, the change in work of breathing paralleled with the sequential change of mRaw. The work of breathing was peaked at 6 hr after extubation, which showed a tendency to decrease thereafter. Conclusions : Reversible increase of work of breathing after extubation may occur in the patients who underwent extubation, and the increase in mRaw could be responsible for the increase in work of breathing. In addition, the risk of weaning failure after extubation may increase in the patients who have increased WOB immediately after extubation.

• Journal of Periodontal and Implant Science
• /
• v.33 no.2
• /
• pp.159-166
• /
• 2003

The purpose of this study was to investigate and compare the frequence of 4 periodontal pathogens in the supra- and subgingival plaque in periodontally healthy subjects. Twenty adult individuals aged 22 to 28 years (mean age 23.65 years) participated in this study. All subjects had no pocket sites more than 3 mm deep, and the sites selected for sampling were all negative for bleeding. After drying and isolation of the sites with cotton rolls, supragingival plaque was sampled using sterile periodontal curette. Each plaque sample was placed in individual tubes containing 500 ml of 1X PBS. After removal of the supragingival sample and any remaining supragingival plaque, subgingival plaque samples were taken from the same sites using sterile curette and placed in similar individual tubes. Identification of 4 putative periodontal pathogens from the samples was performed by polymerase chain reaction based on 16S rDNA. Chi-square test was employed to identify significant explanatory variables for the presence of the 4 periodontal pathogens. The data show that Actinobacillus actinmycetemcomitans, Porphyromonanas gingivalis, Bacteroides forsythus, and Fusobacterium nucleatum occurred in 16.9%, 14.4%, 52.5%, and 80.6%, respectively. No significant differences were noted in the periodontal pathogens between supra- and subgingival plaques according to the kind of teeth. However, the incisors were at higher risk for harboring F. nucleatum (p <0.05). Conclusion: These results reveal that anaerobic periodontal pathogens can be detected in supragingival plaques. Supragingival plaque may function as a reservoir of peri-odotopathogens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.280-289
• /
• 2015

Anaerobic digestion is an efficient and renewable energy technology that can produce biogas from a variety of biomasses such as animal manure, food waste and plant residues. In developing countries this technology is widely used for the production of biogas using local biomasses, but there is little information about the value of these biomasses for energy production. This study was therefore carried out with the objective of estimating the biogas production potential of typical Vietnamese biomasses such as animal manure, slaughterhouse waste and plant residues, and developing a model that relates methane ($CH_4$) production to the chemical characteristics of the biomass. The biochemical methane potential (BMP) and biomass characteristics were measured. Results showed that piglet manure produced the highest $CH_4$ yield of 443 normal litter (NL) $CH_4kg^{-1}$ volatile solids (VS) compared to 222 from cows, 177 from sows, 172 from rabbits, 169 from goats and 153 from buffaloes. Methane production from duckweed (Spirodela polyrrhiza) was higher than from lawn grass and water spinach at 340, 220, and 110.6 NL $CH_4kg^{-1}$ VS, respectively. The BMP experiment also demonstrated that the $CH_4$ production was inhibited with chicken manure, slaughterhouse waste, cassava residue and shoe-making waste. Statistical analysis showed that lipid and lignin are the most significant predictors of BMP. The model was developed from knowledge that the BMP was related to biomass content of lipid, lignin and protein from manure and plant residues as a percentage of VS with coefficient of determination (R-square) at 0.95.This model was applied to calculate the $CH_4$ yield for a household with 17 fattening pigs in the highlands and lowlands of northern Vietnam.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.86-94
• /
• 2015

This experiment was conducted to evaluate the chemical composition and amino acid (AA) digestibility of sunflower seed meal (SFSM) and to use this data to develop prediction equations for estimating AA digestibility for growing pigs. Ten SFSM were collected from five provinces in China. Twelve barrows ($38.8{\pm}4.6kg$), fitted with ileal T-cannula were allotted into two $6{\times}6$ Latin square designs. Each of six experimental periods comprised a 5-d adaption period followed by a 2-d collection of ileal digesta. The ten test diets contained 50% SFSM as the sole source of AA. Another nitrogen-free diet was used to measure the basal endogenous losses of crude protein (CP) and AA. Chromic oxide (0.3%) was used as an inert marker in each diet. There was considerable variation (CV>10%) among the ten SFSM in chemical composition (dry matter [DM]). The concentration of CP and ether extract (EE) ranged from 29.33% to 39.09% and 0.88% to 11.33%, respectively. Crude fibre (CF), neutral detergent fibre and acid detergent fibre ranged from 21.46% to 36.42%, 38.15% to 55.40%, and 24.59% to 37.34%, respectively. There was variation among the ten SFSM in apparent ileal digestibility (AID) and standardized ileal digestibility (SID) for lysine and threonine, which ranged from 63.16 to 79.21 and 55.19% to 72.04% for AID and 67.03% to 82.07% and 61.97% to 77.01% for SID, respectively. The variation in CP and methionine ranged from 60.13% to 74.72% and 74.79% to 88.60% for AID and 66.70% to 79.31% and 77.16% to 90.27% for SID, respectively. Methionine was a good indicator to predict AA digestibility. These results indicate that conventional chemical composition of SFSM was variable (CV>10%) among the ten SFSM (DM). The results of AID, SID and prediction equations could be used to evaluate the digestibility of SFSM in growing pigs.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.502-511
• /
• 2002

컴퓨터의 기술적 발전은 사회 여러 분야에 막대한 영향을 끼쳤다. 그중 악보인식분야에도 커다란 영향을 주었다. 그러나, On-line 상에서 그린 악보를 실시간으로 정형화된 악보형태로 변환하는 처리에 대한 연구가 미흡하여 이에 대한 연구가 필요하다. 본 논문에서는 실시간으로 악보를 인식하고, 사용자의 편의를 도모하기 위해 DP(Dynamic Programming) 매칭 법을 이용한 On-Line 악보인식에 관한 방법을 제안하였다. 본 연구에서는 실시간으로 입력되는 악상기호를 인식하기 위해, 가장 유효한 정보인 악상 기호내의 방향, x, y 좌표를 이용하여 벡터형태로 추출한 후 음표와 비음 표(쉼표, 기타기호)의 두개의 그룹으로 나누어진 표준패턴과의 DP매칭을 통해 인식한다. 먼저 tablet을 통해 실시간으로 악상 기호를 입력할 때 생기는 x, y좌표를 이용하여, 펜의 움직임에 대한 16방향 부호화를 수행한다. 음표와 비 음표를 구분하기 위한 시간을 줄이고자 16방향 부호화를 적용하지 않고 사사분면부호화를 적용한다. 음표를 약식으로 그릴 경우 음표 머리에 해당하는 부분의 좌표는 삼사분면에 분포하고, 폐곡선의 음표일 경우에는 좌표가 사사분면에 고르게 나타난다. 폐곡선을 제외한 음표의 머리는 폐곡선과 같은 조건이면서 입력받은 y좌표 값들 중에서 최소 값과 최대 값을 구한 다음 2로 나눈 값을 지나는 y좌표의 개수가 임의의 임계값 이상이면 음표로 판단한다. 위 조건을 만족하지 않을 경우 비 음표로 취급한다. 음표와 비 음표를 결정한 다음, 입력패턴과 표준패턴과의 DP매칭을 통하여 벌점을 구한다. 그리고 경로탐색을 통해 벌점에 대한 각각의 합계를 구해 최소 값을 악상기호로 인식하였다. 실험결과, 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.리되고 이원화된 코드체계와 데이터 형태의 이질화를 통일하는 방법으로 데이터웨어하우스 시스템을 제시하였다. 결국 병원에서 데이터웨어하우스 시스템의 구축은 임상, 연구, 교육의 유기적 순환관계를 정립하여 지식의 순환적 고리인 수집, 공유, 확산, 재창출을 지속적 유지할 수 있는 인프라를 구축해 준다. 반면 상이한 정보들간의 충돌과 이에 따른 해석의 오류로 잘못된 의사결정을 위한 정보를 제공할 수 있고 기초정보의 접근 및 추출의 유용성에 의해서 정보유출에 대한 문제가 한계점으로 나타났다.로세스 개선을 위해서 무엇을 정말로 필요로 하는지를 밝힘으로써, 한국 소프트웨어 산업의 현실적인 특수성을 고려한 소프트웨어 프로세스 평가와 개선 모델의 개발을 위한 기초적인 자료를 제공할 것으로 예상된다. 또한, 본 연구 결과는, 우리나라 소프트웨어 조직들이 실제로 무엇을 필요로 하는지를 밝힘으로써, 우리나라의 소프트웨어 산업을 육성하기 위한 실효성 있는 정책 입안을 위한 기초 자료를 제공할 것으로 예상된다.를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different among mature stages. According to these results, the yellow ripe period is appropriate to harvest the whole crop rice for forage considering

• Korean Parent-Child Health Journal
• /
• v.4 no.1
• /
• pp.68-81
• /
• 2001

This research is to study about the weight-change of a pregnant woman, conditions of the woman and an infant. The weight-change of a mother during pregnancy was observed and that was expressed as the basis on the body mass index of a mother before pregnancy. The effects of weight-changes on both the discomfort, complications of pregnant mother and the condition of an infant were also investigated. Thus we set a purpose that this study would help pregnant woman and an infant to maintain and enhance their health conditions by proper weight control through nursing mediation. This study was performed in a certain hospital of university in seoul from Feb. 1. 2000 to Mar. 31. 2000. We explained the purpose of this study to the hospital institution and obtained consent of investigation. 152 inpatients who were in condition from PA 37 weeks to PA 42 weeks were the subject of this study. The research materials were made through of question paper that inpatients make answer by themselves and investigation paper. The question paper was about general background, weight and height before pregnancy and discomfort of the physical degree. And the investigation paper was about parity, maternal weight(late pregnancy), high pregnancy, delivery method, hemoglobin level, Apgar score, fetal weight. Physical discomfort was measured using the implement made by Kim hae won(1996) (chronbach's ${\alpha}=0.85$). SPSS was used to do statistics for managing and analyzing data. The results of this study were like followings. 1. The mean value of gained weight during pregnancy was about 13.8kg within from 3 kg to 26 kg. Among 152 research candidates, the gained weight of 80(52.6%) candidates remained within an ideal range. But that of 37 candidates(24.3%) became less than the ideal range. Also that of 35 candidates(23.0%) became over than the ideal range. 2. In the investigation of the relation between the weight change of a pregnant woman and her condition, the scores to represent physical discomfort were middle in all candidates. And the physical discomfort of over weight-gained group was more than that of low weight-gained group, but there was no difference in statistics(F=0.234, p=0.791). The weight-changes of pregnant woman didn't have an influence with the high risk of pregnancy(F=0.509, p=0.477). Also, the weight-changes didn't have an influence on delivery method($x^2=3.825$, p=0.148). However, in the investigation of the relation between weight-change and hemoglobin level, the change of hemoglobin level was highest in over weight gained group(F=3.062, p=0.05). 3. In the investigation of the weight-change of pregnant woman and the condition of infant. the weight changes didn't have an influence on both 1 min Apgar score(F=0.157, p=0.855) and 5 min Apgar score(F=0.030, p=0.970) of infant. Also, in the investigation of weight-change of a pregnant woman and weight difference of a infant with Pearson Correlation Coefficient, the weight-change of a pregnant woman affected vastly the weight of a infant. It was also found that the more pregnant woman gained in weight, the more did gain weighty infants. This relation was in net proportion(r=0.256, p=0.001). In conclusion, these results suggest that the weight-changes during pregnancy in Korea women of these days are more increased than that of the past days and individual variation in weight-changes is very high. Also, these results suggest that the changed hemoglobin level of a mother and weight of an infant were meaningfully affected by the weight-changes of a pregnant woman during pregnancy. However, the physical discomfort of a pregnant woman, the high risks of pregnancy, the delivery method and Apgar score of an infant were not affected by the weight-changes during pregnancy. Because the recommendation suggesting the ideal weight-change, used this study, is basis on the subject of American women, therefore, these results also suggest the necessity of such recommendation which is subject to Korean women.

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.