• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.6
• /
• pp.767-775
• /
• 1999

The purpose of this study was to evaluate the effect of wattage and curing time on surface hard-ness, three-point bending strength and internal porosity of microwave curing denture base resin. Two sizes of resin specimens were made of Acron $MC^{(R)}\;;\;3.5{\times}10{\times}60mm$ for surface hardness and three-point bending strength measurement and $5{\times}12{\times}60mm$ for internal porosity measurement. They were cured by microwave energy at varing wattages(500W, 700W) and curing times(2min., 3min., 4min.) to determine if a certain wattage/curing time combination would improve physical properties. Surface hardness was measured with Vikers hardness tester, three-point bend-ing strength with universal testing machine and internal porosity was calculated by measuring the weight in air and in water. The results obtained were as follows: 1. There was no significant difference in percent porosity among experimental groups(p>0.05). 2. 500W/3min. group showed the higher surface hardness than 700W/2, 3, 4min. groups(p<0.05), and 700W/4 min. group showed the lower surface hardness than 500W/2, 3, 4min. groups(p<0.05), but there was no significant difference among others(p>0.05). 3. 500W/3min. group yielded the higher value of bending strength than 500W/2min., 700W/3, 4min. groups(p<0.05), but there was no significant difference among others(p>0.05).

• Bulletin of the Korean Chemical Society
• /
• v.5 no.4
• /
• pp.149-153
• /
• 1984

Reactions of $MoOCl_5^{2-}$ with ${\alpha}_2-[P_2W_{17}O_{61}]^{10-}$ have been studied spectrophotometrically and several complexes have been identified. The transient species initially formed is probably $[Mo_2O_4(P_2W_{17}O_{6l})_2]^{18-}$. At $pH {\le} 3$the visible spectrum changes gradually, indicating formation of a transient isomer of $[P-2Mo^VW_{17}O_{62}]^{7-}$, which again transforms into the stable isomer. The transient isomer absorbs light much more strongly than the stable isomer in the visible range. At $pH > 3 [P_2W^VW_{16}O_{61}]^{11-}$ is formed probably via the transient isomer of $[P_2Mo^VW_{17}O_{61}]^{7-}$.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.97-106
• /
• 2000

In these respects the purpose of this research is manufacturing Co-W-P alloy thin film on the corning glass 2948 by electroless plating method using $NaH_2PO_2H_2O$ (sodium hypophosphite) as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction occurred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of 8$0^{\circ}C$. Also magnetic characteristics was found to be most excellent at the pH of 9 and the temperature of 7$0^{\circ}C$, resulting in the coercive force of 870Oe and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was 0.216$\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand, (1010), (0002), (1011) orientation of hcp for $\alpha$-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-W-P alloy thin film, coercive force was 500Oe and squareness was 0.6. For crystal orientation, (0002) orientation of $\alpha$-Co was dominatly found. Then we could confirm the formation of perpendicular magnetization. The content of P was constant at 0.8$\pm$0.2% and the content of W increased as the concentration of Na$_2$WO$_4$increased. When the concentration of Na$_2$WO$_4$was 0.1mol/L, the composition of W was 20%. We observed the changes of magnetic characteristics and microstructure of thin film depositions of Co-W-P by the heat treatment. For heat treatment, the temperature was increased step by step to 10$0^{\circ}C$, 20$0^{\circ}C$, 30$0^{\circ}C$, and 40$0^{\circ}C$ and it took 1 hour at each step in the reductive condition of hydrogen gas. By the heat treatment, flatness of surface was improved, but there were no changes on the magnetic characteristics and the microstructures.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.119-124
• /
• 2000

Thirty three strains of bacteria were isolated from the wastewater and soil contaminated a chemical softener, nrganopolysiloxane. Of these, five strains which showed higher activities for removal this chemical were finally selected for further study. By five strains the 2,500 mgll chemical softener was removed 65.2-67.9% at $37^{\circ}C$ for 5 days by shaking. The pH optimum for growth of W3721, S3712, and S3723 strain were at around pH 7.0-7.5, and W2811, and W2823 strain were at pH 6.5-7.0, respectively. The temperature optimum for growth of W3712 strain was at $37^{\circ}C$ and the other four strains were at TEX>$30^{\circ}C$. The optimal pH and temperature for removal by W3712 strain was initial pH 7.0 and $37^{\circ}C$ respechvely. The W3712 strain was identified and named as Corynebacterium pseudodiphtheriticum W3712 based on its morphological and physiological characteristics.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.428-433
• /
• 1973

The quantitative separations of a mixture containing equal amount of each anion such as Si(IV), As(V), P(V), S(VI), W(VI) and Cr(VI) are carried out by the elution through 20${\times}3.14cm^2$ column of anion exchange resin, Dowex 1${\times}$8. The eluents are a mixture of 0.07 M hydrochloric acid and 0.03 M sodium chloride (pH = 1.30) for Si(IV), As(V) and P(V) species, a mixture of 0.6 M sodium chloride and 0.3 M sodium hydroxide for S(VI), W(VI) and Cr(VI) species, and 0.1 N sodium sulfite (pH = 3.48) for P(V) and As(V) species. The subsidiary anions in a standard mixture such as Si(IV), As(V), S(VI), P(V) and W(VI) are separated together from large amount of Fe(III) by the elution through 30cm${\times}3.14cm^2$ column of the resin, Dowex${\times}$50w${\times}$12, using a mixture of 0.1 M sodium nitrate and 2 percent dimethylsulfoxide aqueous solution as an eluent. Si(IV), As(V), S(VI), P(V) and W(VI) eluted together are separated quantitatively under the same conditions as in the separations of the anion mixture. By the conditions obtained in the separations of the standard mixture, Fe(III) and all of the subsidiary anions in steel are quantitatively separated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.497-498
• /
• 2009

본 논문에서는 YouFree에서 콘텐츠 관리 시스템을 기반으로 한 콘텐츠 공유 시스템을 제안한다. 이 시스템은 YouFree Basic의 개인용 서버를 이용하므로 손쉽게 P2P 기반의 콘텐츠 공유를 지원할 수 있으며, 모든 Basic이 Center 에 연결되어 ID를 가지므로 이를 이용해서 접근 제어 메커니즘을 제공한다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.837-846
• /
• 2012

Breast cancer (BCa) is the leading type of cancer in Mexican women. Genetic factors, such as single nucleotide polymorphisms (SNP) of P450 system, have been reported in BCa. In this report, and for the first time in the literature, we analyzed the rs3735684 (7021 G>A), rs11553651 (15016 G>T) and rs56195291 (60020 C>G) polymorphisms in the CYP2W1, 4F11 and 8A1 genes in patients with BCa and in healthy Mexican women to identify a potential association between these polymorphisms and BCa risk. Patients and controls were used for polymorphism analysis using an allelic discrimination assay with TaqMan probes and confirmed by DNA sequencing. Links with clinic-pathological characteristics were also analyzed. Statistical analysis was performed using the standard ${\chi}^2$ or Fisher exact test statistic. No significant differences were observed in the distributions of CYP2W1 (OR 8.6, 95%CI 0.43-172.5 P>0.05; OR 2.0, 95%CI 0.76-5.4, P>0.05) and CYP4F11 (OR 0.3, 95%CI 0.01-8.4 P>0.05) genotypes between the patients and controls. Only the CYP8A1 CC genotype was detected in patients with BCa and the controls. All polymorphism frequencies were in Hardy-Weinberg Equilibrium (HWE) in the controls (P>0.05). We found a significant association between BCa risk and smoking, use of oral contraceptives or hormonal replacement therapy (HRT), obesity, hyperglycemia, chronic diseases, family history of cancer and menopausal status in the population studied (P<0.05). Tobacco, oral contraceptive or HRT, chronic diseases and obesity or overweight were strongly associated with almost eight, thirty-five, nine and five-fold increased risk for BCa. Tobaco, obesity and hyperglycemia significantly increased the risk of BCa in the patients carrying variant genotypes of CYP2W1 (P<0.05). These results indicate that the CYP2W1 rs3735684, CYP4F11 rs11553651 and CYP8A1 rs56195291 SNPs are not a key risk factor for BCa in Mexican women. This study did not detect an association between the CYP2W1, 4F11 and 8A1 genes polymorphisms and BCa risk in a Mexican population. However, some clinico-pathological risk factors interact with CYP2W1 genotypes and modifies susceptibility to BCa.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.401-405
• /
• 2004

Undoped SrB $i_2$T $a_2$O$_{9}$, donor-doped Sr$_{0.99}$B $i_2$(Ta$_{0.99}$W$_{0.01}$)$_2$O$_{9}$ and acceptor-doped SrB $i_2$(Ta$_{0.99}$Ti$_{0.01}$)$_2$O$_{8.99$ ceramics were prepared and their microstructure, ferroelectric P-E hysteresis and Curie temperature were investigated. Grain size did not influence P-E hysteresis curve in undoped SrB $i_2$T $a_2$O$_{9}$ ceramics. Donor-Doped Sr$_{0.99}$B $i_2$(Ta$_{0.99}$W$_{0.01}$)$_2$O$_{9}$ ceramics showed more saturated P-E hysteresis curve with larger remanent polarization (P$_{r}$) than undoped SrB $i_2$T $a_2$O$_{9}$ ceramics while acceptor-doped SrB $i_2$(Ta$_{0.99}$Ti$_{0.01}$)$_2$O$_{8.99}$ ceramics led to a pinched P-E hysteresis loop. Larger polarization in donor-doped Sr$_{0.99}$B $i_2$(Ta$_{0.99}$W$_{0.01}$)$_2$O$_{9}$ ceramics resulted from easier domain wall motion by Sr-vacancies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.156.2-156.2
• /
• 2016

The variation of the surface structure of the Al adsorbed W(110) planes according to the coverage and the substrate temperature has been investigated using LEED and ISS When the Al atoms were adsorbed on the W(110) surface at room temperature, a p($1{\times}1$) of the fcc (111) face were found at the coverage higher than 4 ML. When the substrate temperature was kept at 900 K during Al adsorption and the coverage was 1.0 ML, the surface revealed a p($1{\times}1$) of the bcc(110) face and when the coverage is 1.5 ML, the surface showed a p($1{\times}1$) of the bcc (110) face together with a p($1{\times}1$) double domain structure (fcc (111) face) rotated ${\pm}3^{\circ}$ from the [100] direction of the W(110) surface. When Al atoms were adsorbed on the W(110) surface at the substrate temperature of 1000 K and the coverage was higher than 1.0 ML, the surface revealed a p($1{\times}1$) of the bcc(110) face together with p($1{\times}1$) double domain structure(fcc(111) face) rotated ${\pm}3^{\circ}{\sim}5^{\circ}$ from the [100] direction of the W(110) surface. When Al atoms were adsorbed on the W(110) surface at the substrate temperature of 1100 K and the coverage was 0.5 ML, Al atoms formed a p($2{\times}1$) double domain structure When the coverage was 1.0 ML, the double domain hexagonal structure (fcc(111) face) rotated ${\pm}5^{\circ}$ from the [100] direction of the W(110) surface and another distorted hexagonal structure was found. Low-energy electron diffraction results along with ion scattering spectroscopy results showed that the Al atoms followed the Volmer-Weber growth mode at high temperature.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.38-47
• /
• 2020

In this study, factors affecting the adsorption reaction for the separation/recovery of V and W using Lewatit monoplus MP 600, a strong basic anion exchange resin, from the leachate obtained through the soda roasting-water leaching process from the spent SCR DeNO_X catalyst investigated and the adsorption mechanism was discussed based on the results. In the case of the mixed solution of V and W, both ions showed a high adsorption ratio at pH 2-6, but the adsorption of W was greatly reduced at pH 8. In the adsorption isothermal experiment, both V and W were fitted well at the Langmuir adsorption isotherm, and the reaction kinetics were fitted well at pseudo-second-order. As a result of conducting an adsorption experiment by adjusting the pH with H₂SO₄ to remove Si, which inhibits the adsorption of V and W from the leachate, the lowest W adsorption ratio was shown at pH 8.5. Desorption of W was hardly achieved in strongly acidic solutions, and desorption of V was well performed in both strongly acidic and strongly basic solutions.