• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.105-113
• /
• 2009

The interpretation of observed waveform characteristics identified in refraction and wide-angle reflection data increases confidence in the crustal structure model obtained. When calculating traveltimes and raypaths, wavefront methods on a regular grid based on graph theory are robust even with complicated structures, but basically compute only first arrivals. In this paper, we develop new algorithms to compute traveltimes and raypaths not only for first arrivals, but also for fast and later reflection arrivals, later refraction arrivals, and converted waves between P and S, using the modified wavefront method based on slowness network nodes mapped on a multi-layer model. Using the new algorithm, we can interpret reflected arrivals, Pg-later arrivals, strong arrivals appearing behind Pn, triplicated Moho reflected arrivals (PmP) to obtain the shape of the Moho, and phases involving conversion between P and S. Using two models of an ocean-continent transition zone and an oceanic ridge or seamount, we show the usefulness of this algorithm, which is confirmed by synthetic seismograms using the 2D Finite Difference Method (2D-FDM). Characteristics of arrivals and raypaths of the two models differ from each other in that using only first-arrival traveltime data for crustal structure analysis involves risk of erroneous interpretation in the ocean-continent transition zone, or the region around a ridge or seamount.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.514-521
• /
• 2017

This paper proposes a shadowing compensation method for the solar modules of grid-connected photovoltaic generation systems. The shadowing compensator (SC) implemented by the proposed shadowing compensation method is used only for the solar modules that can be shaded by predictable sources of shading. The proposed SC can simplify both the power circuit and the control circuit as well as improve power efficiency and utilizes a voltage equalizer configured by a modified multi-winding fly-back converter. The proposed SC harvests energy from the entire solar cell array to compensate for the shaded sub-modules of the solar cell array, producing near-identical voltages of all shaded and un-shaded sub-modules in the solar cell array. This setup prevents the formation of multiple peaks in the P-V curve under shaded conditions. Hardware prototypes are developed for the SCs implemented by the conventional and modified multi-winding fly-back converters, and their performance is verified through testing. The experimental results show that both SCs can overcome the multiple peaks in the P-V curve. The proposed SC is superior to the SC implemented by the conventional multi-winding fly-back converter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.269-269
• /
• 2012

A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.322-330
• /
• 2011

To compare of quality control for chest radiography between special examination (SEP) and medical institution for pneumoconiosis (MIP). For the first time, we had visited at 33 institutions (SEP; 17 institutions, MIP; 16 institutions) to evaluate the quality control of chest radiography which is used in diagnosis of patients with pneumoconiotic complications. Image quality was rated by two experienced chest radiologists, and evaluated for radiological technique (RT), reading environment (RE) and image quality (IQ) between SEP and MIP according to the guideline published by OSHRI. Generator capacity, used duration and modality of chest radiography equipment were not signigicant difference between SEP and MIP, but there were signigicant difference in tube voltage and grid ratio used for chest radiography except to tube current and exposure time. SEP was statistically significant higher in RT (71.2 vs. 54.5, p=0.015), RE (78.8 vs. 51.5, p=0.007) to MIP, but not significant difference in IQ (64.8 vs. 59.3, p=0.180). For reliable and precisional diagnosis of patients with pneumoconiotic complications, the MIP requires the evaluation and education of quality control for improving chest radiography.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.71-76
• /
• 1998

This study was carried out to examine whether the developmental capacity of bovine immature oocytes frozen ultra-rapidly using electron microscope (EM) grids and EFS30 can be obtained. As freezing solution, we used EFS30 which consisted of 30% ethylene glycol, 0.5 M sucrose, 18% ficoll and 10% FBS added in D-PBS. As criterior of oocyte viability, the rates of maturation, fertilization and embryonic development were determined. The results obtained in this experiment were summarized as follows: When ultra-rapidly frozen immature oocytes were thawed, 43.2% of them were survived. The rates of maturation (84.1%) and normal 2 pronuclei formation (57.5%) of frozen immature oocytes were not significantly different when compared to those of control (92.5, 65.0%). In addition, the rates of $\geq2$-cell (65.0%) and blastocyst formation (30.8%) of freezing group were not significantly different when compared to those of control (73.7, 35.7%). These results demonstrate that developmental capacity of frozen-thawed bovine immature oocytes can be successfully obtained when survived from the ultra-rapid freezing method using EM grid and EFS30.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2006.06a
• /
• pp.185-207
• /
• 2006

산업단지는 지난 30년간 한국 산업의 성장을 이끌어 온 발전모형으로서 존재하여 왔으나, 최근 지식에 기초한 혁신창출형 경제체제가 국가 및 지역사회의 경쟁력을 위한 핵심요소로 부각되면서 '효율성' 측면에서 그 의미가 크게 퇴색되었다. 이를 위한 대안으로서 '클러스터'가 대두되어 다양한 분석연구가 수행되고 있으며, 정부와 지방자치단체들은 이를 바탕으로 각자의 특색에 맞는 클러스터 조성 정책을 펼치고 있다. 그러나, 기존의 연구들은 클러스터의 종류 및 발전단계에 관한 프레임워크 제시 등의 이론적 수준에 국한되어 있거나, 지역사례 연구를 통한 성공요인분석(CFS) 및 단순한 정책방향 제시 수준에 머물러 있는 한계를 보이고 있다. 본 연구는 '클러스터'에 관한 선행연구를 분석해 보고, 클러스터의 중요한 판단기준이 되는 군집도와 네트워크 연계 정도를 기준으로 한 '$2{\times}2$ 클러스터 전략격자모형'을 효과적인 클러스터 구축전략 수립을 위한 이론적 틀로서 제시하였다. 또한, 분석틀에 실질적인 사례로서 '충북지역의 SW산업'을 전략격자모형에 대응시켜 분석함으로써 전략격자의 유용성을 제시하였다. 이를 위해, 충북지역의 SW 공급업체와 수요업체를 대상으로 설문조사를 실시, 분석한 후 그 결과를 전략격자모형에 대응시켰다. 그 결과, 충북지역의 SW산업은 아직 산업단지 수준에 있는 것으로 분석되었고 충북의 SW산업의 충북 내의 수요만으로는 더 큰 성장이 어려운 것으로 분석, 지역 내에서의 수요창출을 목표로 하는 '단일 클러스터' 구축보다는 지역적 제약을 벗어난 '매가 클러스터'의 구축으로 지역 내외에서의 수요창출이 가능한 클러스터의 구축을 그 대안으로 제시하였다.${\alpha}$에 E. coli Jm109의 plasmid pBX19, pBR322를 전이시켰다. 6. L. lactis ssp. lactis 균주에 lysozyme 처리시 30${\sim}$80%의 생존율을 보였으며, 대부분의 L. acidophilus 균주의 경우 약 70%의 생존율을 보였다. L. casei 102S의 경우는 45분간 처리 시에도 100%의 생존율을 보였다. 8. L. lactis ssp. lactis 균주에 pLZ12를 6.0kV에서 전이시킨 결과 12.5kV에서보다 형질전환 효율이 훨씬 높았으며 lysozyme 처리에 의해 형질전환 효율이 증가되었다. 9. L. acidophilus 균주에 pLZ12를 전이시 6.0kV에서는 전이가 모두 이루어졌으나, 12.5kV에서는 L. acidophilus WIESBY와 NCFM에서 전이가 이루어지지 않았으며, lysozyme 처리 후 pLZ12를 전이시켰을 때 12kV보다 6.0kV에서 형질전환 효율이 증가되었다. 10. Gene Pulser와 Progenitor II를 사용하여 pLZ12를 L. lactis ssp. lactis 균주에 전이하였을 때 Gene Pulser에 비해 Progenitor II의 형질전환 효율이 현저히 떨어졌다. L. acidophilus HY7008과 HY7001은 두 기기 모두 형질전환이 이루어졌으나, L. acidophilus WEISBY와 NCFM은 Progeni-tor II에서 전이가 일어나지 않았으며, Gene Pulser에서 전이균주를 얻어 두 electroporator간에 형질전환 효율의 차이를 보였다. 11. L. casei 102S에 pLZ12

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.42-51
• /
• 1981

Boron was predeposited into p (100) Si wafer at 94$0^{\circ}C$ for 60minutes to make the back surface field. High tempreature diffusion process at 1145$^{\circ}C$ for 3 hours was immediately followed without removing boron glass to obtain high surface concentration Back boron was annealed at 110$0^{\circ}C$ for 40minutes after boron glass was removed. N+ layer was formed by predepositing with POCI3 source at 90$0^{\circ}C$ for 7~15 minutes and annealed at 80$0^{\circ}C$ for 60min1es under dry Of ambient. The triple metal layers were made by evaporating Ti, Pd, Ag in that order onto front and back of diffused wafer to form the front grid and back electrode respectively. Silver was electroplated on front and back to increase the metal thickness form 1~2$\mu$m to 3~4$\mu$m and the metal electrodes are alloyed in N2 /H2 ambient at 55$0^{\circ}C$ and followed by silicon nitride antireflection film deposition process. Under artificial illumination of 100mW/$\textrm{cm}^2$ fabricated N+PP+ cells showed typically the open circuit voltage of 0.59V and short circuit current of 103 mA with fill factor of 0.80 from the whole cell area of 3.36$\textrm{cm}^2$. These numbers can be used to get the actual total area(active area) conversion efficiency of 14.4%(16.2%) which has been improved from the provious N+P cell with 11% total area efficiency by adding P+ back.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.874-884
• /
• 2013

This paper presents in details channel and noise characteristics over narrow bands below 500kHz based on the field tests over underground low voltage(LV) power lines in residential areas in Korean grid. We show that the channel characteristics of narrowband signals over underground LV power line are decent. We first describe methodology of channel characteristic measurements including channel frequency response, noise, and line impedance, and obtain channel characteristics over the underground LV lines in the residential areas. Also based on the measurement results, we adopt the IEEE P1901.2 standard on the FCC High band, and bring up narrow band power line communication network.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.85-91
• /
• 2010

Digital radiography has been replacing rapidly the analog radiography for diagnosis of pneumoconiosis. The purpose of this study is to compare quality control of digital radiography (DR) and analog radiography (AR) for chest radiography in medical institution for pneumoconiosis (MIP) For the first time, we visited MIP to evaluate the chest radiography which is used for patients with pneumoconiosis, including equipment, technical parameters and reading environment. There were 33 institutions. DR and AR were installed in 24 and 9 institutions, respectively. Between DR and AR, we compared the radiological technique (RT), image quality (IQ) and reading environment (RE) to use the guideline published by Occupational Safety and Health Research Institute (OSHRI). The image quality was rated by two experienced chest radiologists for pneumoconiosis with certified from OSHRI. The chest radiography equipment was not significantly difference between AR and DR, but there were significantly difference in tube voltage and grid ratio used for chest radiography except to tube current, exposure time. Statistically, DR is significantly higher in RT(70.3 vs. 43.8, p = 0.009), RE(77.7 vs. 33.3, p = 0.004) than AR, but it's not significantly difference in IQ (65.6 vs. 52.8, p = 0.050). AR and DR in RT were passed 33.3%, 75.0% respectively (p = 0.044) and 44.4%, 79.2% (p = 0.090) in IQ and 44.4%, 91.7% (p = 0.009) in RE. In MIP, DR needs to replace AR in diagnosis of pneumoconiosis.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.54-63
• /
• 2015

Petrophysical parameters such as porosity and fluid saturation which provide useful information for reservoir characterization could be estimated by rock physics model (RPM) using seismic velocity and resistivity. Therefore, accurate P-wave velocity and resistivity information have to be obtained for successful estimation of the petrophysical parameters. Compared with the individual inversion of electromagnetic (EM) or seismic data, the joint inversion using both EM and seismic data together can reduce the uncertainty and gives the opportunity to use the advantages of each data. Thus, more reliable petrophysical properties could be estimated through the joint inversion. In this paper, for the successful estimation of petrophysical parameters, we proposed an effective method which applies a grid-search method to find the porosity and fluid saturation. The relations of porosity and fluid saturation with P-wave velocity and resistivity were expressed by using RPM and the improved resistivity distribution used to this study was obtained by joint inversion of seismic and EM data. When the proposed method was applied to the synthetic data which were simulated for subsea reservoir exploration, reliable petrophysical parameters were obtained. The results indicate that the proposed method can be applied for detecting a reservoir and calculating the accurate oil and gas reserves.