• Asian-Australasian Journal of Animal Sciences
• /
• 제22권7호
• /
• pp.937-942
• /
• 2009

The aim of this study was to analyze the effects on growth and muscle development during the growing period of the sex-linked dwarf gene in the background of a Taiwan Country chicken strain, L2, selected for egg production. Eight crossbred males, heterozygous for the DW*DW mutation, were each backcrossed to six females of the L2 strain to produce two genotypes of BC females, either normal (DW*N+/-) or dwarf (DW*DW/-). The experiment included 251 normal and 207 dwarf pullets. The effect of the dwarf gene on body weight and shank length was highly significant from 2 weeks of age. The reduction of body weight by the dwarf gene reached 34.8% and 37.4% as compared to normal sibs at 16 and 20 weeks of age, respectively. Parameters of the growth curve were estimated: the age at inflection (TI) was higher in normal pullets (66.9 days) than in dwarf pullets (61.2 days). A significant effect of the dwarf gene on single muscle fiber cross-section area was found from 12 weeks of age onwards, whereas the dwarf gene had no effect on the total number of muscle fibers. Comparing the effect of the dwarf gene on shank length at different ages revealed an earlier effect on skeleton growth, observed from 2 weeks of age, than on muscle development, which was affected from 8 to 12 weeks of age.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.220-225
• /
• 2004

The mesh-insensitive structural stress procedure by Dong is modified to apply to the welded joints with local thickness variation and inignorable shear/normal stresses along local discontinuity surface. In order to make use of the structural stress based K solution for fatigue correlation of welded joints, a proper crack growth model needs to be developed. There exist some significant discrepancies in inferring the slope or crack growth exponent in the conventional Paris law regime. Two-stage crack growth model was not considered since its applications are focused upon the fatigue behavior in welded joints in which the load ratio effects are considered negligible. In this paper, a two-stage crack growth law considering high mean loading is proposed and proven to be effective in unifying the so-called anomalous short crack growth data.

• Advances in Computational Design
• /
• 제2권4호
• /
• pp.333-348
• /
• 2017

Inspections of ancient metallic bridges have illustrated fatigue cracking in riveted connections. This paper presents a comparison between two alternative finite element (FE) models proposed to predict the fatigue strength of a single shear and single rivet connection. The first model is based on solid finite elements as well as on contact elements, to simulate contact between the components of the connection. The second model is built using shell finite elements in order to model the plates of the riveted connection. Fatigue life predictions are carried out for the shear splice, integrating both crack initiation and crack propagation lives, resulting from the two alternative FE models. Global fatigue results, taking into account several clamping stresses on rivet, are compared with available experimental results. Proposed comparisons between predictions and experimental data illustrated that the proposed two-stage model yields consistent results.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1041-1048
• /
• 2006

The pulley is one of core mechanical elements in the power steering system for vehicles. The pulley operates under both the compressive loading and the torque. Therefore, to assure the safety of the power steering system, it is very important to investigate the durability and the optimization of the pulley. In this study, the applied stress distribution of the pulley under high tension and torsion loads was obtained by using finite element analysis. Based on these results the fatigue life of the pulley with the variation of the fatigue strength was evaluated by a durability analysis simulator. The results at 50% and 1% for the failure probability were compared with respect to the fatigue life. In addition to the optimum design for the fatigue life is obtained by the response surface method. The response function utilizes the function of the life and weight factors. Within range for design life condition the minimization of the weight, one of the formulation, is obtained by the optimal design. Moreover the optimum design by considering its durability and validity is verified by the durability test.

• The Korean Journal of Pain
• /
• 제36권1호
• /
• pp.113-127
• /
• 2023

Background: Resting-state functional connectivity (rs-FC) may aid in understanding the link between painmodulating brain regions and the descending pain modulatory system (DPMS) in fibromyalgia (FM). This study investigated whether the differences in rs-FC of the primary somatosensory cortex in responders and non-responders to the conditioned pain modulation test (CPM-test) are related to pain, sleep quality, central sensitization, and the impact of FM on quality of life. Methods: This cross-sectional study included 33 females with FM. rs-FC was assessed by functional magnetic resonance imaging. Change in the numerical pain scale during the CPM-test assessed the DPMS function. Subjects were classified either as non-responders (i.e., DPMS dysfunction, n = 13) or responders (n = 20) to CPM-test. A generalized linear model (GLM) and a receiver operating characteristic (ROC) curve analysis were performed to check the accuracy of the rs-FC to differentiate each group. Results: Non-responders showed a decreased rs-FC between the left somatosensory cortex (S1) and the periaqueductal gray (PAG) (P < 0.001). The GLM analysis revealed that the S1-PAG rs-FC in the left-brain hemisphere was positively correlated with a central sensitization symptom and negatively correlated with sleep quality and pain scores. ROC curve analysis showed that left S1-PAG rs-FC offers a sensitivity and specificity of 85% or higher (area under the curve, 0.78, 95% confidence interval, 0.63-0.94) to discriminate who does/does not respond to the CPM-test. Conclusions: These results support using the rs-FC patterns in the left S1-PAG as a marker for predicting CPM-test response, which may aid in treatment individualization in FM patients.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.379-392
• /
• 2005

Statement of problem. One of the common problems of dental implant prosthesis is the loosening of the screw that connects each component, and this problem is more common in single implant-supported prostheses with external connection, and in molars. Purpose. The purposes of this study were: (1) to compare the initial abutment screw detorque values of the six different implant-abutment interface designs, (2) to compare the detorque values of the six different implant-abutment interface designs after cyclic loading, (3) to compare the detorque values of regular and wide diameter implants and (4) to compare the initial detorque values with the detorque values after cyclic loading. Material and methods. Six different implant-abutment connection systems were used. The cement retained abutment and titanium screw of each system were assembled and tightened to 32Ncm with digital torque gauge. After 10 minutes, initial detorque values were measured. The custom titanium crown were cemented temporarily and a cyclic sine curve load(20 to 320N, 14Hz) was applied. The detorque values were measured after cyclic loading of one million times by loading machine. One-way ANOVA test, scheffe’s test and Mann-Whitney U test were used. Results. The results were as follows : 1. The initial detorque values of six different implant-abutment connections were not significantly different(p>0.05). 2. The detorque values after one million dynamic cyclic loading were significantly different (p<0.05). 3. The SS-II regular and wide implant both recorded the higher detorque values than other groups after cyclic loading(p<0.05). 4. Of the wide implants, the initial detorque values of Avana Self Tapping Implant, MIS and Tapered Screw Vent, and the detorque values of MIS implant after cyclic loading were higher than their regular counterparts(p<0.05). 5. After cyclic loading, SS-II regular and wide implants showed higher detorque values than before(p<0.05).

• Applied Biological Chemistry
• /
• 제27권1호
• /
• pp.45-51
• /
• 1984

K. marxianus inulase는 inulin 배지에서 생성이 증가되고, glucose나 fructose의 탄소원에 의하여 생성이 억제되는 유도효소로서 배양중 최대의 효소활성은 생장곡선의 정지기 초기에 나타났다. 부분 정제된 inulase는 inulin, sucrose, raffinose를 가수분해하며, 이 효소의 inulin과 sucrose에 대한 최적 pH와 최적온도는 동일하게 4.0과 $55^{\circ}C$였으며, 두 기질에 대하여 $Hg^{++}$와 $Ag^{+}$ 이온은 효소활성을 똑같이 크게 억제하는 반면, EDTA에 대해서는 영향이 없었다. 또한 이 효소의 특징은 invertase 활성도 동시에 가지고 있는 endo-type이며, inulin과 sucrose에 대한 Km 값은 각각 $1.2{\times}10^{-2}M$과 $1.3{\times}10^{-4}M$이었다.

• Steel and Composite Structures
• /
• 제30권6호
• /
• pp.591-601
• /
• 2019

This research study investigates experimentally and analytically the axial compressive behaviour of Concrete Filled Fiber Reinforced Polymer Tube (CFFT) columns with and without Fiber Reinforced Polymer (FRP) bars. The experimental program comprises five circular columns of 204-206 mm outer diameter and 800-812 mm height. All columns were tested under concentric axial compressive loads. It was found that CFFT columns with and without FRP bars achieved higher peak axial compressive loads and corresponding axial deformations than conventional steel reinforced concrete (RC) column. The contribution of FRP bars was about 12.1% of the axial compressive loads carried by CFFT columns reinforced with FRP bars. Axial load-axial deformation ($P-{\delta}$) curves of CFFT columns were analytically constructed, which mapped well with the experimental $P-{\delta}$ curves. Also, an equation was proposed to predict the axial compressive load capacity of CFFT columns with and without FRP bars, which adequately considers the contributions of the circumferential confinement provided by FRP tubes and lower ultimate strength of FRP bars in compression than in tension.

• Clinical and Experimental Reproductive Medicine
• /
• 제37권2호
• /
• pp.115-124
• /
• 2010

목 적: 임신 전 $CD3^-/CD56^+/CD16^+$ 말초혈액 자연살해세포 (pbNK cell)의 분획과 세포용해 활성도를 정상군과 습관성 유산의 기왕력을 가진 환자군으로 나누어 비교, 분석하고 습관성 유산의 위험도를 제시할 수 있는 각각의 cut-off value를 설정하고자 하였다. 연구방법: 전향적 연구로서 습관성 유산의 기왕력이 있는 여성을 환자군 (n=35)으로 하였으며, 대조군으로 불임이나 습관성 유산의 기왕력이 없으며 정상아의 출산 경험이 있는 여성을 대조군 (n=15)으로 설정하였다. 유세포분석기를 이용하여 pbNK cell 분획 및 세포용해 활성도를 측정 후 그 결과를 비교 분석하였다. 결 과: pbNK cells의 분획은 습관성 유산 환자군에서 대조군에 비해 통계적으로 유의하게 높은 결과를 보였다($14.2{\pm}5.2$ vs. $9.4{\pm}3.7%$, p=0.002, 95% confidence interval [CI] 1.8~7.8). Receiver operating characteristic curve (ROC) 곡선을 이용하여 pbNK cell의 분획에 대한 cut-off values을 12.1%로 정하였을 때 습관성 유산의 위험도는 8.4배 증가하였다. pbNK cell의 K562 세포용해 활성도를 3가지 다른 Effector to Target (E:T) 비율 (50:1, 25:1, 12.5:1)을 사용하여 측정한 결과 각각의 경우에 있어 습관성 유산 환자군에서 대조군에 비해 통계적으로 유의하게 증가된 결과를 보였다 ($48.3{\pm}19.0$ vs. $31.3{\pm}11.9%$ in 50:1 ratio, p=0.002; $37.0{\pm}18.1$ vs. $20.2{\pm}9.2%$ in 25:1 ratio, p<0.001; $23.5{\pm}12.7$ vs. $12.4{\pm}7.3%$ in 12.5:1 ratio, p=0.001). ROC 곡선을 이용하여 각각 E:T 비율에서 세포용해 활성도의 cut-off values (43.1% in 50:1, 26.9% in 25:1, and 17.4% in 12.5:1)을 설정하여 분석한 결과 습관성 유산의 위험도는 각각 10.0배, 11.4배, 그리고 15.0배 증가된 결과를 보였다. 결 론: 원인이 분명하지 않은 습관성 유산 환자에서 pbNK cell의 분획과 세포용해 활성도를 측정하는 것은 면역학적 원인, 특히 동종면역 요인에 의한 습관성 유산의 유용한 진단 지표로 이용될 수 있을 것으로 사료된다. 향후 동종 면역반응에 의한 습관성 유산 환자에서 면역학적 원인의 치료 전, 후 pbNK cell의 분획과 세포용해 활성도를 측정, 비교하여 그 효과를 증명하는 연구가 필요할 것으로 생각된다.

• Nutrition Research and Practice
• /
• 제7권4호
• /
• pp.302-308
• /
• 2013

The emerging role of endothelial inflammation in diabetes has stimulated research interest in the effects of nutrition on related indices. In the current study we investigated whether the nutrient composition of dietary formula as reflected in glycemic index (GI) may be predictive of postprandial endothelial inflammation in non-diabetic subjects. A double-blinded, randomized, crossover study was conducted in non-diabetic subjects (n = 8/group). Each subject consumed three types of diabetes-specific dietary formulas (high-fiber formula [FF], high-monounsaturated fatty acid (MUFA) formula [MF] and control formula [CF]) standardized to 50 g of available carbohydrates with a 1-week interval between each. The mean glycemic index (GI) was calculated and 3-hour postprandial responses of insulin, soluble intercellular adhesion molecule-1 (sICAM-1), nitrotyrosine (NT) and free fatty acids (FFA) were measured. The MF showed the lowest mean GI and significantly low area under the curve (AUC) for insulin (P = 0.038), but significantly high AUCs for sICAM-1 (P<0.001) and FFA (P < 0.001) as compared to the CF and FF. The FF showed intermediate mean GI, but significantly low AUC for NT (P<0.001) as compared to the CF and MF. The mean GI was not positively correlated to any of the inflammatory markers evaluated, and in fact negatively correlated to changes in FFA (r = -0.473, P = 0.006). While the MF with the lowest GI showed the highest values in most of the inflammatory markers measured, the FF with intermediate GI had a modest beneficial effect on endothelial inflammation. These results suggest that nutrient composition of dietary formula as reflected in the GI may differently influence acute postprandial inflammation in non-diabetic subjects.